What are the subjects of the Consulting Engineer Exam?

The examination subjects for Registered Consulting Engineers are "Macroeconomic Policy and Development Planning"."Engineering Project Organization and Management"."Project Decision Analysis and Evaluation" andModern Consulting Methods and Practices。Those who sit for all four subjects must pass all subjects within 4 consecutive examination years; Those who are exempted from some subjects must pass the examination subjects within 2 examination years.

Macroeconomic Policy and Development Planning: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, 78 points pass;

Engineering Project Organization and Management: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, 78 points pass;

Project Decision Analysis and Evaluation: 60 multiple-choice questions, 1 point for each question; 35 multiple-choice questions, 2 points each; The duration of the exam is 150 minutes; The total score is 130 points, 78 points pass;

Modern Consulting Methods and Practices: 6 subjective questions; The exam lasts 180 minutes; The total score is 130 points, 78 points pass;

The above content reference: Encyclopedia - Consulting Engineer.

Ask the Engineer exam subjects and question types.

Examination subjects: Macroeconomic Policy and Development Planning, Project Organization and Management, Project Decision Analysis and Evaluation, Modern Consulting Methods and Practices.

Macroeconomic policy and development planning, engineering project organization and management, engineering project decision-making analysis and evaluation of the three subjects of the examination question type for the objective questions, all in the answer sheet answers, marking by the provincial (autonomous region, municipal) personnel examination center organization and implementation.

1. Read the precautions for answering the questions carefully (the first page of the answer sheet) before answering the questions;

3. In order to ensure the quality of the scan, you must use a fountain pen or signature pen (black) to answer;

4. The marking of the subject shall be organized and implemented by the whole country, and the specific matters will be notified separately.

Candidates should bring a fountain pen or signature pen (black b pencil, eraser, calculator (silent, no storage function) when taking the test. The scratch paper is distributed by the local personnel examination center and collected after use.

Consulting Engineer Exam:

1. The examination subjects of consulting engineers are: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices".

2. It is estimated that the 2018 consulting engineer examination will be in mid-April.

The examination consists of five subjects: Introduction to Engineering Consulting, Macroeconomic Policy and Development Planning, Engineering Project Organization and Management, Project Decision Analysis and Evaluation, and Modern Consulting Methods and Practices.

The Consulting Engineer Examination consists of four subjects: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices".

The difficulty of the exam is different for each subject, and the revision method is also different.

What kind of engineer is divided into registered engineer and professional title engineer Registered engineer Tested professional knowledge and national laws and regulations Professional title engineer takes foreign language computer and publish**.

The 2022 consulting engineer application time is April 9-10, 2022, and the application conditions are as follows:

1. Obtain a college degree in engineering, or economics, management science and engineering, and have been engaged in engineering consulting business for a total of 8 years.

2. Obtain a bachelor's degree or degree in engineering, or economics, management science and engineering, and have been engaged in engineering consulting business for a total of 6 years.

3. Obtain a double bachelor's degree including engineering disciplines, or economics, management science and engineering, or graduate students in engineering disciplines, and have been engaged in engineering consulting business for a total of 4 years.

4. Obtain a master's degree in engineering, or economics, management science and engineering, and have been engaged in engineering consulting business for a total of 3 years.

5. Obtain a doctorate degree in engineering, or economics, management science and engineering, and have been engaged in engineering consulting business for a total of 2 years.

6. Persons who have obtained the above academic qualifications or degrees in other disciplines and majors in economics and management, or in other disciplines, shall have been engaged in engineering consulting business for 2 years.

Those who abide by national laws and regulations, abide by professional ethics, and meet one of the following conditions can apply to participate in the consulting engineer (investment) professional qualification examination

1.Obtained a college degree in engineering, or a college degree in economics, management science and engineering, and has been engaged in engineering consulting business for a total of 8 years;

2.Obtain a bachelor's degree or degree in engineering, or economics, management science and engineering, and have been engaged in engineering consulting business for a total of 6 years;

3.Obtained a double bachelor's degree in engineering, or a double bachelor's degree in economics, management science and engineering, or a graduate degree in engineering, and has been engaged in engineering consulting business for a total of 4 years;

4.Obtained a master's degree in engineering, or a master's degree in economics, management science and engineering, and has been engaged in engineering consulting business for a total of 3 years;

5.Obtained a doctorate degree in engineering, or economics, management science and engineering, and has been engaged in engineering consulting business for a total of 2 years;

6.Persons who have obtained the above-mentioned academic qualifications or degrees in other disciplines and majors in economics and management, or in other disciplines, shall have a corresponding increase of 2 years in the cumulative number of years engaged in engineering consulting business;

Yousen Education Consulting Engineer Everest Class Course is hotly registered! The "test god" Zuo Hongjun team teaches, the original online school learning mode, the 6-year pass rate verification, the consulting engineer training knowledge points are intensively explained, the daily top-secret exclusive homework, the exclusive consultant supervises, and the consulting engineer exam proposition rules, foundations, systems, and Q&A teachers teach the whole process.

The examination of registered consulting engineers has been changed to "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation" and "Modern Consulting Methods and Practices". The examination results of consulting engineers are managed on a rolling basis for a period of 4 years. Those who sit for all four subjects must pass all the subjects within 4 consecutive examination years; Those who are exempted from some subjects must pass the examination subjects within 2 examination years.

The subjects of the consulting engineer examination are: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management".

Analysis of Project Decision-making Criteria and Evaluation of Frontal Difficulties" and "Modern Consulting Methods and Practices".

4 subjects. Silver skin.

Consultant He Kaichen generally takes a total of 4 subjects, namely: 1Macroeconomic Policy and Development Planning 2Project Team Sun Weaving and Management 3Project Decision Analysis and Evaluation 4Modern Consulting Methods and Practices

Consulting engineers take the examination of "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation", and "Modern Consulting Methods and Practice", a total of 4 subjects.

Among them, the three subjects of "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", and "Project Decision Analysis and Evaluation" are single-choice questions and multiple-choice questions. The question type of the "Modern Consulting Methods and Practices" test is a comprehensive question.

Exam cycle

The results of the consulting engineer professional qualification examination are implemented on a rolling basis for a period of 4 years, and candidates who take the 4 subject examinations (the application level is all subjects) must pass the examination subjects in 4 consecutive examination years.

Those who are eligible for exemption and only take 2 subjects (the application level is exempt from 2 subjects) must pass the examination subjects within 2 consecutive examination years in order to obtain the vocational qualification certificate.

Registered Consulting EngineerThe examination will be held in April, and the subject of the examination is "Macroeconomic Policy and Development Planning". "Engineering Project Organization and Management".

Project Decision Analysis and Evaluation", "Modern Consulting Methods and Pragmatism".

April 9: 9:00-11:00 a.m

30 Macroeconomic Policy and Development Planning 14:00-16:30 Afternoon Project Organization and Management April 10:

9:00-11:30 a.m. Project Decision Analysis and Evaluation 14 p.m

00-17:00 Modern Consulting Methods and Practices.

Tips for the Certified Consulting Engineer Exam

From the pass rate of the registered consulting engineer exam difficulty, the registered consulting engineer pass rate has always been a concern of candidates, the pass rate of registered consulting engineer is also the embodiment of the country's regulation of practicing registered personnel in recent years, in recent years, a trend of the pass rate of registered consulting engineers is getting lower and lower, and the control is becoming more and more strict.

The pass rate of registered consulting engineers is roughly 20-25%. In general, the pass rate of registered consulting engineers is relatively high among several certificates with relatively high gold content in the construction industry.

There are four examination subjects for consulting engineers, namely "Macroeconomic Disturbance Policy and Development Plan", "Project Organization and Management", "Analysis and Evaluation of Project Leakage Decision-making Strategy" and "Modern Consulting Methods and Practices". Among them, "Methods and Practices of Modern Consultation and Slow Search" is a subjective question, and the remaining three subjects are all objective questions.

There are two types of consulting engineer examination subjects: registered consulting engineer and senior consultant.

1. Registered Consulting Engineer:

2. Basic theories and methods: mainly examine the consulting business and management principles of consulting engineers, the methods of analysis, problem solving and judgment adopted by consulting engineers in the consulting process, and the basic theories and methods required for consulting practice.

3. Enterprise Management and Strategy: Mainly examines the knowledge of management, economics and enterprise strategic management, including strategy and tactics, resource management, organizational management, etc.

4. Financial management: mainly examines the knowledge of financial accounting, cost management, financial analysis, etc., including financial statement analysis, investment decision-making, capital structure, risk management, etc.

2. Senior Consultant:

1. Theories and Methods of Consulting Business: Examine the principles of consulting business and management, the methods of analysis, problem solving and judgment adopted by consulting engineers in the consulting process, and the high-level, complex and cutting-edge theories and technologies required for consulting practice.

2. Enterprise management and strategy: mainly examines the knowledge of enterprise strategic management, enterprise organization design and change, human resource management, marketing management, etc.

3. Project management: It mainly examines the knowledge of project management, project risk management, traditional and agile project management, including the planning, implementation, monitoring and closing of the project management process.

4. Financial management: mainly examines the knowledge of financial accounting, cost management, financial analysis, etc., including financial statement analysis, investment decision-making, capital structure, risk management, etc.

Consulting Engineer Features

1. Macro perspective: Consulting engineers have a macro perspective, can understand and analyze the overall situation of the organization or individual, provide corresponding solutions, and help customers reasonably plan and layout development.

2. Comprehensive ability: Consultants need to have a wide range of knowledge and skills, such as management, economics, statistics, psychology, law and other basic theoretical knowledge and practical ability, in order to adapt to the consulting needs of different fields and industries and solve the problems faced by customers.

3. Teamwork spirit: Consulting engineers need to cooperate with different customers and colleagues in their work, and need to have team spirit, be able to work together, provide high-quality services, and achieve a win-win situation for customers and the company.

4. Professional certification: Consulting engineers need to pass the national vocational qualification certification and other relevant authoritative certifications, and obtain industry and professional recognition to prove that they have a certain consulting service ability and professional level.

5. Continuous learning: The profession of consulting engineer requires continuous learning and self-improvement, paying attention to the cutting-edge development and trend of Xiaoxian in this field, flexibly using excellent consulting theories and methods, and adapting to the changing needs and challenges of the industry.