How to prepare for the exam scientifically for safety engineers and how to prepare for the exam for

The order of study is according to Law, Management, Technology, and Practice. After learning one chapter of each subject, brush the after-class exercises of the corresponding chapter.

After studying one subject, you can take a mock test and score about 70 points, and then you can study the next subject.

Now everyone has a sense of the difficulty of the note-safety exam! It's getting closer and closer to the difficulty of the first construction exam! You have to pay attention to the method of improving a little bit every day and learning a little bit every day. Lay the foundation!

It is mainly used for the consolidation and learning of the basic knowledge of the textbook, and most of the test points of the note exam are ** in the textbook, and the textbook must be thoroughly studied, so that the foundation will be laid, and it is basically not far from success.

Study the exam 100 textbooks and intensive courses, so that you can master every knowledge point. During the lecture, you should mark the key points in time and take notes in class for the next stage of review.

Do chapter practice questions, understand the weak chapters of your own learning, and carry out targeted learning, you can listen to the teacher's explanation repeatedly, overcome the difficulties, until you master it.

Through the exam 100 sprint course, grasp the key test points, master the framework of teaching materials, and form a knowledge chain. Practice past papers to understand the format of past questions, the difficulty of past questions, and the direction of the exam.

Do mock questions, strengthen and consolidate knowledge points through a lot of exercises, and familiarize yourself with the different directions of each knowledge point. We should be good at classifying the test questions, and what kind of solution routines should be used for the same type of questions, drawing inferences from one case will be of great help to our exams.

Do the questions should be reviewed from time to time, the wrong question set should be really used, the questions that will not be able and the questions that often make the same mistakes should be sorted out in the wrong question set, and the experience should be summarized in time and strive not to make mistakes again. It is more helpful to read the wrong set of questions more often than to do one more set of questions.

Consolidate knowledge points and reach the realm of familiarity and forgetfulness. Do a good job of adjusting your mentality before the exam, and allocate a good time to review every day, and conduct several simulations in strict accordance with the mode of the Zhu'an exam, so as to grasp your own time to solve the questions in this way, repeatedly hone the test points, and calm down the anxious mentality before the exam.

Stage 1: Basic Learning.

1.Read through the previous year's textbook 3 times;

3.Begin to study the textbooks for the safety engineer exam, be familiar with the textbooks, and master the important and difficult points of the textbooks with the outline.

Phase 2: Strengthen the foundation.

1.Read through the new syllabus of the exam, compare the old and new textbooks, read through the new textbooks twice, and summarize the important and difficult points in combination with the past past questions;

2.Youlu Education will update the comparison of the changes in the old and new teaching materials for safety engineers in a timely manner.

3.Summarize and straighten out knowledge points to form a knowledge system.

Stage 3: Exercises.

1.Combine textbooks, notes, high-frequency test center compilations and other systems to master the test center;

2.Do questions chapter by chapter and section by section, analyze the idea of asking questions in combination with past past questions, and master the skills of doing questions;

3.Make full use of expert Q&A, high-quality resources and other services to strengthen the mastery of test centers and solve problems in a timely manner;

4.Pay attention to the mastery of the main knowledge of each subject.

Stage 4: Sprint review.

1.Participate in the pre-test training course, or follow the Youlu teacher to sprint efficiently, understand the proposition's ideas, and obtain the best test points while learning to solve the questions quickly and accurately;

2.Learn how to do the questions from the instructor.

3.Strengthen revision, especially the difficult parts.

Stage 5: Review of the test center.

1.Check and fill in the gaps, find your own points of loss, and focus on your shortcomings;

2.Adjust the status. During the week, if possible, it is recommended that you arrange your own rest time to ensure that you have enough energy to prepare for the exam.

Any exam relies on our own ability to reserve knowledge, not a fluke pass, otherwise we will experience the feeling of "hard" in the workplace. Therefore, we should enter the state of preparation in advance, and do not affect the whole process of exam review because of our lax psychological state.

1. Patience. To be honest, even if you have been engaged in safety engineering for many years, it is impossible to have a deep memory of guidelines, standards and other documents. Therefore, a rough grasp of these things is no problem, but it is difficult to say the details of the real investigation.

The more work experience, the less interested in this kind of dry learning content, easy to ignore the details, it is recommended that the study before the exam is mainly focused on the details, especially laws and regulations, as the difficulty of the exam increases, the details determine everything.

In addition, although there are many laws and regulations, there are rules to follow in the formulation of laws and regulations, that is, definition, scope, rewards and punishments for various behaviors, restrictions, prohibitions, etc.

2. Practical ability of case examination.

The case test is to test the ability to work in practice, and practical work experience is important. If you have less practical experience, you should use more thinking to solve it, read more reports, think about the advantages and disadvantages of its evaluation scope, grade, and method, whether the thinking is clear, and whether the problem solving is comprehensive and thorough, etc., that is, with the purpose of learning and critiquing, for different understandings, you can analyze the gap according to the relevant technology.

The exam is not limited by industry, but it is also impossible to test the more partial industry technology, and mastering the common technology is the key.

3. Pay attention to the difference between practical work and examination.

1) A lot of actual work is experiential, because of the different levels of projects and environments, sometimes it is not comprehensive, and there are some blind spots that can be formed. Thinking about the questions in the examination process needs to break away from some habitual practices.

The registration for the intermediate registered safety engineer professional qualification examination adopts the online registration method, and the certificate is notified and promised system. There are 4 subjects in the examination, namely "Safety Production Laws and Regulations", "Safety Production Management", "Safety Production Technology Basics", and "Safety Production Professional Practice". How to take the security engineer exam?

1. Intermediate safety engineer examination registration conditions: 1. Have a college degree in safety engineering and related majors, and have been engaged in safety production business for 5 years; Or have a college degree in other majors, and have been engaged in safety production business for 7 years. 2. Have a bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for 3 years; or have a bachelor's degree in other majors, and have been engaged in safety production business for at least 5 years. 3. Have a second bachelor's degree in safety engineering and related majors, and have been engaged in safety production business for more than 2 years; or have a second bachelor's degree in other majors, and have been engaged in safety production business for at least 3 years.

4. Have a master's degree in safety engineering and related majors, and have been engaged in safety production business for 1 year; or have a master's degree in other majors, and have been engaged in safety production business for at least 2 years. 5. Have a doctorate degree and have been engaged in safety production business for 1 year. 6. After obtaining the professional qualification of junior registered safety engineer, he has been engaged in safety production business for 3 years.

The requirements for the safety engineer examination are as follows: all citizens of the People's Republic of China, abide by national laws and regulations, and meet one of the following conditions.

The safety engineer builds the basic talents of the family and the socks include:

Have a technical secondary school degree in safety engineering and line pipe, and have been engaged in safety production business for 4 years; or have a technical secondary school degree in other majors, and have been engaged in safety production business for at least 5 years;

Have a college degree in safety engineering and related majors, and need to be engaged in safety production business for at least 2 years; or have a college degree in other majors, and need to be engaged in safety production business for 3 years.

our lives.

There is always a need for some heartwarming details.

Come on** it. sound x 2021

Born to understand you. No need to get up or speak control.

Wave your hand at it.

It's easy to turn off alarms with air gestures.

At the same time, the family shirt and jujube do not bother.

Let users enjoy convenience and comfort in life.

This simple mega demolition heart-warming operation.

Simply yyds!

**Tea Soldier Xiao Luo's small theater.

Let's take a look.

Sound X 2021 Turn off the charm of the alarm clock with a wave of your hand!

The so-called rough learning is actually to have a general understanding of the subject knowledge, know the advantages and disadvantages of each subject, candidates can be based on the registered safety engineer exam syllabus, a general understanding of the knowledge of each subject, the content and difficulty of the exam also have a basic understanding, find their weak subjects and strong subjects, and then develop relevant study plans, and adhere to the implementation.

For the content you have learned, you can allow you to forget, but you are not allowed to have something you don't understand, because forgetting the knowledge points can be solved by repeated memory, and the only way to solve the problem is to find a way to understand, such as asking the teacher, repeating the ** exam 100 courses, etc., and then you can continue to learn, which also lays a solid foundation for the review in the subsequent sprint stage.

The key content in the textbook of intermediate registered safety engineer should not only be memorized, but also ensure that you can understand it, and you can also write it in professional and standard terms to meet the requirements of the exam. Everything is based on the textbook, centered on the textbook, and must not be separated from the textbook.

Through mock questions, check your learning situation and learning status during this time, and doing questions is the only way to test your learning results. By doing the questions, you can find out the weak links of each subject and review and memorize the key points, and then understand and learn in a targeted manner, which can further help you master the knowledge more comprehensively and accurately.

For the safety engineer exam, you need to pass the exam of four subjects within two years, you can choose to take 2 exams per year, or you can choose to pass all at one time, of course, it also depends on personal ability, if you are an office worker, it is recommended that you do not apply for all subjects at one time, because there is not much time to review, you want to take all the exams at one time, the possibility is not very large, today I want to introduce to you is the registered safety engineer exam preparation strategy, let's take a look at it specifically.

It is necessary to master the textbooks firstly to prepare for the registered safety engineer exam, and secondly, to do some relevant exercises to increase the understanding of knowledge points; Finally, candidates who have jobs can choose tutorial classes to avoid not having much free time to revise and affect their preparation progress.

1. Review first: familiarize yourself with the textbook.

If you have a good memory, read the book three times, and if you have a bad memory, read the book eight times. Of course, it is a combination of intensive reading and extensive reading, and a combination of reading and writing. No matter what the exam is, mastering the textbook is a must, and if there are students who can't review on time and amount because they don't have enough time or are too busy with work, there is generally not much hope of passing.

2. Consolidation review: simulation exercises.

On the basis of mastering the textbook, doing some relevant exercises can increase the understanding of the knowledge points. If you can find the real exam questions from the previous two years, do it seriously. Regardless of whether the exercises are done right or wrong, they must find a basis in the book, the knowledge points are appropriately extended, you can't do the questions for the sake of doing, you can't finish the right answers, the practice lies in the refinement rather than the more, and strive to do the preparation to master a knowledge point.

3. Participating in tutorial classes is more secure.

Employees in the security industry are generally working outside the home, and the work is relatively intense, which affects learning. In such a situation, it is generally more helpful to choose to participate in some tutorial classes and strengthen the understanding of the class content with the assistance of the teacher. According to the characteristics of the security industry, it is generally more appropriate to participate in online remote tutoring, because online remote tutoring can arrange class time independently, not limited by the location of the class, and can listen to the class repeatedly, and the course can also be carried to ***, easy to carry, and learn anytime and anywhere.

First, it is necessary to allocate time scientifically.

1. Within the specified time, you should be able to do all the test questions, and there should be no situation where the time to submit the paper has come and the test questions have not been completed.

2. Even if you finish the test questions in advance within the specified time, it is best not to be busy handing in the papers, and you should check them repeatedly.

3. Don't be loose before answering questions, don't be tight before and then loose, and be moderate in time mastery.

4. Don't divide your time too evenly. When it comes to subjective questions, take a little more time.

5. There should be a certain amount of time, as a time for supplementation and review, generally about half an hour is appropriate.

2. Examination of questions. Whether you can accurately understand the meaning of the question is the basic factor that directly affects the score of the test and the score of the test. Judging from the situation of some past exams, it has occurred frequently that points are lost due to unsuccessful questions, especially in questions with high scores such as case analysis questions.

It's a shame to lose points just because you get the question wrong.

3. Answer questions. According to the structure of the test paper, objective test questions are arranged in the first half of the test paper, which generally includes three types: fill-in-the-blank, multiple-choice and multiple-choice questions. Subjective questions are placed in the second half of the paper, which generally includes noun explanations, short-answer questions, and case analysis questions. In terms of the order of answering, it is generally necessary to answer objective questions first, and then answer subjective questions.

Of all the question types, case study questions are more difficult. Case analysis questions not only require candidates to be familiar with the concepts and comprehend the knowledge points, but also require the candidates to be able to integrate the knowledge they have learned and apply the theories they have learned to solve practical problems.

1. Basic learning.

According to the first round of intensive courses in the online course, the three common subjects will be reviewed to have a preliminary understanding of the subject, understand what is said in each chapter, and which are the key test points.

2. Summarize the main points.

After completing the first basic learning, you need to build your own knowledge framework, use the knowledge of each chapter to express it using a mind map, and then gradually fill in the framework according to other materials such as textbooks. At this stage, it is required to have a deep understanding of the three public subjects, and at the same time find out which ones you are not good at and have not yet mastered, and make marks.

3. Know yourself and know your opponent, and you will not be defeated in a hundred battles.

First of all, it is necessary to understand the examination requirements, test paper structure, examination time, etc. of registered safety engineers, so as to know oneself and the other, in order to survive a hundred battles. For details, please refer to the 2019 version of the exam syllabus.

4. Prepare study materials.

The two subjects of management and technology can refer to the original 11 editions of the textbook, and the content has not changed much. The "Laws and Regulations" suggests that you should write down the original text of the relevant laws according to the outline. "Technical Practice" is placed at the back of the textbook.