Why can t my ipad2 turn on, and I can t connect to the computer 20 when I press and hold the switch

Mine is like that sometimes.

iPad suddenlyBlack screenReasons and solutions for not being able to turn on:

1. The iPad is frozen.

If the iPad suddenly does not turn on, you can try to force restart the iPad first, and the method of force restart is also very simple, directly press and hold the power button and the home button.

You can force restart in about 10 seconds.

Forced restart ipad also has no response, at this time you can be on the computer ** an itunes, connect the ipad to the computer to try, see if it is connected, can be connected to the computer, according to the prompts directly flash, connected to the computer without any response, it is likely to be a hardware problem, during the warranty period can contact the authorized after-sales service for warranty, generally not man-made failures are free warranty.

2. The iPad motherboard is short-circuited.

If the iPad force restarts and there is still no response, then it is generally a problem with the motherboard, usually a certain filter capacitor on the motherboard.

Or caused by damage to the power supply IC, this situation can only be repaired by a third-party regular repair shop, and there is no way to solve it by yourself, and you need to disassemble and remove the motherboard before it can be repaired.

3. Battery failure.

If the ipad is not used for a long time, the ipad takes out and plugs in the charger without any response, this situation is generally charging or battery aging, the charging resistance is relatively large, the current is relatively small, the solution is to find a maintenance point to replace the battery, of course, you can also not replace the battery, find a maintenance point to disassemble and activate the battery.

If the iPad has a black screen problem after flashing, updating the iPadOS system, jailbreaking, etc., then it can be considered as a problem on the iPadOS system.

Method 1: Force restart

When the iPad encounters a black screen, white apple, automatic restart, freeze, etc., the first thing to do is to force the shutdown and restart.

If it can't be restored to normal, or there will still be an inexplicable black screen, shutdown and reboot situation in the later stage, you can refer to method 2 for iPadOS system repair.

iPad Force Restart Operation:

Method 2: iPadOS System Repair

When there is a system problem with iPad, it is recommended to use an iPadOS system repair tool to fix it, such as Tenorshare iOS System Repair Tool, which can fix 150+ iPadOS system failures.

Common ones include white apple, black screen, stuck in recovery mode, device looping indefinitely, unable to boot, stuck in the update process, etc.

Related Notes:

After upgrading the iPadOS system, the mobile phone system may be incompatible with the software, which may cause the device to screen black.

The occasional reboot or inexplicable black screen restart caused by opening a specific app is most likely caused by a conflict or incompatibility between the iPadOS system and some installed apps.

It is recommended to update the iPadOS system in time, or to do iPadOS system repair.

Hello dear and happy to answer for you. iPad keeps black screen is iPad dead, if the iPad suddenly appears and does not turn on, you can try to force restart iPad first, the method of force restart is also very simple, directly press and hold the power button and the home button for about 10 seconds to force restart. There is also a possibility that the iPad motherboard is short-circuited, if the iPad force reboot still does not have any response, then it is generally a motherboard problem, generally caused by a filter capacitor or power supply IC damage on the motherboard, this situation can only be repaired by a third-party regular repair shop, and there is no way to solve it by leading wax, and the motherboard needs to be disassembled and removed before it can be repaired.

The above is all the answers of the answer, I hope to help you, I wish you a happy life

Reasons and solutions for iPad suddenly black screen and can't turn on:

1. The iPad is frozen.

If the iPad suddenly does not turn on, you can try to force restart the iPad first, the method of force restart is also very simple, directly press and hold the power button and the home button for about 10 seconds to force restart.

Forced restart ipad also has no response, at this time you can be on the computer ** an itunes, connect the ipad to the computer to try, see if it is connected, can be connected to the computer, according to the prompts directly flash, connected to the computer without any response, it is likely to be a hardware problem, during the warranty period can contact the authorized after-sales service for warranty, generally not man-made failures are free warranty.

2. The iPad motherboard is short-circuited.

If the iPad force reboot still does not have any response, then it is generally a motherboard problem, generally caused by a filter capacitor or power supply IC damage on the motherboard, this situation can only be repaired by a third-party regular repair shop, there is no way to solve it, you need to disassemble and remove the motherboard to repair.

3. Battery failure.

If the ipad is not used for a long time, the ipad takes out and plugs in the charger without any response, this situation is generally charging or battery aging, the charging resistance is relatively large, the current is relatively small, the solution is to find a maintenance point to replace the battery, of course, you can also not replace the battery, find a maintenance point to disassemble and activate the battery.

1. If the screen of the Apple iPad is damaged, it will cause a black screen that cannot be opened, and the Apple iPad can be sent to Apple's after-sales service center for repair, so that the problem of the black screen cannot be opened; 2. If the Apple iPad is out of power, there will be a black screen that cannot be turned on, you can charge the Apple iPad, so that you can turn on the Apple iPad; 3. If the Apple iPad has a black screen and can't be opened, you can press and hold the on/off key and the home button for 10 seconds, and then the Apple logo will appear on the screen, and then you can use it normally, which is very convenient to operate; 4. If the Apple iPad is used for a long time, the working temperature is too high, it will start the automatic protection device, the iPad will automatically shut down, then you need to wait for a while, when the temperature of the iPad drops down and then turn it on, you can use it normally, I hope mine can help you! If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

The iPad suddenly goes black and can't turn on is a problem that many iPad users may encounter. At this time, users can try some solutions such as charging, force restart, recovery mode, etc. If none of these methods work, the possibility of hardware failure needs to be taken into account.

Charging is one of the most common solutions. If your iPad runs out of battery, it won't turn on. Users can connect their iPad with the original charger and cable, then wait a while until the battery is fully charged.

If you still can't turn on after the battery is fully charged, you need to try other methods.

A force restart may fix some minor issues such as system crashes or unresponsive apps, etc. For iPad, users can press and hold the power button and the home button at the same time until they see the Apple logo appear. Then, release both buttons and wait for your iPad to restart.

If this method doesn't work either, you need to try to enter recovery mode.

Recovery mode is one way to repair your iPad when it has a hardware failure. First, users need to connect the iPad and the computer with a data cable. Then, press and hold the Home button on your iPad and press and hold the Power button at the same time until you see the Apple logo appear.

At this point, the user will need to release the power button, but continue to press and hold the Home button until they see the iTunes logo appear. At this point, users can select "Restore iPad" in iTunes and follow the prompts.

If none of these methods work, it is important to consider the possibility of hardware failure. Users can take their iPad to an Apple Store or an authorized repair shop for service and repair. Before repairing, users had better back up the data on their iPad to avoid losing important files and data.

To sum up, it is a relatively common problem that the iPad suddenly turns on with a black screen, but there are some solutions that users can try to solve this problem. If none of these methods are effective, the possibility of hardware failure needs to be considered, and timely overhaul and repairs should be carried out to avoid greater losses.

Summary. The iPad suddenly can't turn on, and the biggest possibility is that the IAD battery is insufficient. For this kind of charging does not respond, mainly due to excessive battery consumption, you need to charge for a period of time, wait for the power to return to the normal level before you can turn on, you might as well wait for a few hours of charging before you can try it to find that it can be turned on.

If it is charged for a long time, the ipad still cannot be turned on for this exclusion is caused by insufficient power can not be turned on, the main attention is to troubleshoot: (1 ipad tablet system damage for ipad tablet if the system is damaged, it will most likely enter the white apple or boot interface on the jam situation, if the tablet is always on half of the stuck, most likely is a system problem, you can replace the ipad system to solve. (2) iPad boot black screen, no response For this case, if there is a power problem, it is most likely caused by the damage of the ipad tablet, and it is recommended to take it for repair.

In addition, there is a situation where the tablet of the iPad you just bought cannot be turned on, prompting that iTunes needs to be connected.

The iPad suddenly can't turn on, and the biggest possibility is that the IAD battery is insufficient. For this kind of charging does not respond, mainly due to excessive battery consumption, you need to charge for a period of time, wait for the power to return to the normal level before you can turn on, you might as well wait for a few hours of charging before you can try it to find that it can be turned on. If it is charged for a long time, the iPad still cannot be turned on, for this exclusion is caused by insufficient power, the main attention is to troubleshoot:

1 ipad tablet system damage for ipad tablet if the system is damaged, it will most likely enter the white apple or boot interface on the situation that it is stuck, if the tablet is always on half of the stuck, most of it is a system problem, you can replace the ipad system to solve. (2) iPad boot black screen, no response For this case, if there is a power problem, it is most likely caused by the damage of the ipad tablet, and it is recommended to take it for repair. In addition, there is a situation where the tablet of the iPad you just bought cannot be turned on, prompting that iTunes needs to be connected.

Is there electricity yet?

Can it still be turned on.

There is electricity and it cannot be turned on.

It could be that the slab is damaged.

So take it for repairs?

Yes, you charge it first, and then it still won't turn on, so you have to take it for repair.