What should I do if the virtual memory is too low when I run VMWAUE

Adjust the memory to a larger size, the memory of the VM can be set at will.

There are too many things in the C disk.,Clean up the history files of the C disk,IE - Tools - Interent Options - Browsing History - Delete。

Don't put too much stuff in the C drive, it's best to put nothing but system files!

It should be fine to upgrade the memory module, I don't know how big your memory is, because the Windows7 system is much larger than the XP system.

Of course,Win7The system occupies a lot of resources,No program is opened700-800M memory,One way is to add a memory stick,Another is to add virtual memory,That is, the hard disk cuts out a piece of memory,It can be adjusted in the computer properties。

Set the virtual memory manually.

In the default state, the system is allowed to manage the virtual memory, but the management method of the system's default settings is usually conservative, which will cause the page file to be discontinuous during automatic adjustment, and reduce the read and write efficiency, and the work efficiency is not high, so there will often be a prompt like "insufficient memory", so let's set it up by ourselves.

Right-click on the "My Computer" icon on the desktop and select the "Properties" option in the context menu that appears to open the "System Properties" window. Click on the "Advanced" tab in the window.

Click the "Settings" button in the "Performance" area and select the "Advanced" tab in the "Performance Options" window that appears to open its dialog box.

In this dialog box, you can see the area about virtual memory, click the "Change" button to enter the "Virtual Memory" setting window. Select a partition with a large free capacity, check the checkbox before "Custom size", fill in the specific values in the "Initial size" and "Maximum" columns, (1500 is recommended), and then click the "Settings OK" button in turn, and finally restart the computer to make the virtual memory settings take effect.

Generally speaking, virtual memory is a double of physical memory, a little larger is fine, and if you don't want the virtual memory to change frequently, you can set the maximum and minimum values to the same.

There are three solutions to virtual memory that is too low:

The capacity of the custom virtual content (automatic by default) is too small and can be re-sized.

1500 recommended

The disk where the system is located (generally C disk) has too little free capacity and a large number of running programs, and virtual memory is usually created in the system disk directory by default, we can usually delete some unused programs, and move useful files such as documents and data to other disks, and clean up the "** station", so that the system disk remains more than 1GB of space, or the virtual memory is defined under other free space under the drive letter.

The free capacity of the system disk is not small, but because of frequent installation, ** software, and repeated deletion caused by too many file fragments, it is also easy to cause one of the reasons for the lack of virtual memory, virtual memory needs a continuous space, although the disk free capacity is large, but there is no continuous space, and the virtual memory area cannot be established. You can defragment using Disk Utility.

Right-click on my computer on the desktop, Properties, Advanced, Performance, Settings, Advanced, and you can see the size of the virtual memory, which is selected from the custom size. For the memory stool dough stuffy times or so, don't forget to press or clear the settings next to it to save the jujube bend.

Right-click "My Computer", left-click "Brother Finch Attributes", click the "Advanced" tab, click the "Settings" button in the "Performance", and then select the "Advanced" tab, click the "Change" button below, the pop-up window is the virtual envy of the early memory setting window, the general default virtual memory is a range of values from small to large, this is the range of virtual memory change size, it is best to give it a fixed value, so that it is not easy to produce disk fragmentation, the specific value is determined according to the size of your physical memory, Generally 2 times the physical memory, such as 256M, then you should set 256*, or simply 512M, the setting method is as follows:

Assuming that the memory is 256M, and the virtual memory is placed in the D disk, the default must be cleared first, and the C disk is selected, and then the "Settings" button is selected by selecting the "No paging file (N)", and then the virtual memory next to the C disk is gone, and then the D disk is selected, and the "Custom Size" is single, and the "Initial Size" and "Maximum" boxes below are added to the 512, and then click the "Settings" button, you will see the words "512-512" appear next to the D disk, This means that the settings are set, and then all the way to the confirmation, and finally, the system will restart, restart it, and the setup is completed.

Generally, it is better to let the system adjust itself.

Reset the maximum and minimum values of virtual sock starvation. According to the size of your actual memory, the minimum value is multiple of your actual memory, and the maximum value is set to 2 times of your actual memory.

The computer indicates that the virtual memory is insufficient.

There are four reasons for this, and the answer is also included.

1. Infected with the virus!

Some viruses take up a lot of memory space when they break out, causing the system to run out of memory. Hurry up and go to the antivirus, upgrade the virus database, and then get the antivirus measures right!

2. Improper setting of virtual memory.

Improper setting of virtual memory may also lead to the problem of insufficient memory, under normal circumstances, the size of virtual memory is 2 times the size of physical memory, if it is set too small, it will affect the normal operation of system programs. Resize virtual memory Take WinXP as an example, right-click "My Computer", select "Properties", then in the "Advanced" tab, click the "Settings" button in the "Performance" box, switch to the "Advanced" tab, and then click the "Change" button in the "Virtual Memory" box, then reset the virtual memory size, and restart the system when you are done.

The virtual memory is insufficient because the virtual memory settings in Windows are too small or the hard disk space where the virtual memory is located is insufficient. It is recommended to place the virtual memory in a different partition from the operating system, and set a fixed size, generally 1 5 times the memory capacity of the system; Right-click "My Computer", select "Properties", pop up the system properties window, select the "Performance Options" tab, click the "Virtual Memory" button below, pop up the virtual memory settings window, click the "User Specify Virtual Memory Settings" radio button, "Hard Disk", please select the partition with a larger remaining space, and then enter the appropriate range value in the "Minimum" and "Maximum" text boxes. If you're having trouble using your system to get the maximum and minimum values, you can choose to "let Windows manage the virtual memory settings", but make sure that the partition where the virtual memory is located has enough space left (more than twice the system memory).

3. Insufficient system space.

The virtual memory file is in the system disk by default, such as the virtual memory file name of WinXP, if the remaining space of the system disk is too small, resulting in insufficient virtual memory, there will also be a problem of insufficient memory. The system disk must reserve at least 300MB of free space, of course, this value depends on the actual needs of the user. Try not to install various application software in the system disk, ensure that there is enough space for virtual memory files, and it is best to place virtual memory files in non-system disks.

4. Because the system user permission is not set properly.

When a Windows system based on the NT kernel is started, the system user creates a virtual memory file for the system. For the sake of system security, some users use the NTFS file system, but the system user's permission to "write" and "modify" in the system disk is canceled, so that it is impossible to create virtual memory files for the system, and the problem of insufficient memory will also occur when running large programs. The problem is easy to solve, just re-grant the system user the "write" and "modify" permissions, but this is limited to users who use the ntfs file system.