How much money does it cost to build a waste plastic pellet factory, and how big a plant?

1. Selection of the site of the plastic granulation plant.

The first thing to consider is water resources, and it is necessary to have easy access to water. It can be considered by the river, or where wells can be drilled, next to factory areas, urban and rural areas, or rural idle land. Secondly, there must be sufficient electrical resources to be able to provide sufficient voltage.

Third, it should also ensure that the roads are clear and the transportation is convenient, at least the large trucks can reach it.

2. Plant requirements: If a production line is built, the area of Shuangxin plastic machinery and equipment only needs to be about 40 square meters, which requires water, power and electricity, and the material yard can be planned according to the actual situation. If there are several production lines at the same time, it should be crushing and cleaning room, granulation workshop and finished product storage warehouse to facilitate daily management and improve production efficiency.

3. Worker requirements: 2-4 workers are generally enough for a production line.

4. Liquidity: The capital of a production line cannot be less than 5,000 yuan, and large-scale production needs to increase liquidity.

5. Investment funds: (calculated according to daily production.)

A crushing and cleaning machine: 8500-12500 yuan.

A material machine: 32,500---42,000 yuan.

Pelletizer: 1600-5500 yuan.

Other equipment: 3000-10000 yuan.

The total investment of equipment: 45,600---70,000 yuan.

That depends on how much area you plan, and the ordinary price of the plant is about 380.

This initial capital varies greatly. For the same set of processes, some require 100,000 yuan, and some need about 300,000 yuan. We need to set a site, connect water and electricity, repair pools and cement floors, build simple factories, recruit employees, and apply for various certificates to build factories.

There is not much money to buy a machine. At present, many of these plastic particle processing points mainly process recycled beverage bottles, generally around 200,000, depending on your size. Generally, the equipment investment of small plastic pellet factory is about 100,000 yuan, the infrastructure investment is 100,000-200,000 yuan, and the working capital is 300,000-500,000 yuan.

The production capacity of such a plant is 10-20 tons per day. It can only be manufactured in ordinary parts and at a second equivalent price**. The factory with equipment investment of 200,000-300,000 yuan, if there are skilled workers, strict management, and a production capacity of 10-20 tons per day, you can make first-class pieces to first-class ****.

Extended information: 1. Huge risk, this risk is the risk that once the investment fails, it may make your principal go to zero. This is the biggest of all the risks, no matter who you are, such a risk is unbearable, if the market fluctuates violently, your way of operation is possible to make the principal completely cleared, all lost, then such an operation, should not be carried out, there may be a loss of principal There is leverage, especially the leverage of over-the-counter allocation, ** (** itself has leverage), futures index, etc., these are high-risk investment methods, if you are an investor, you should try to avoid participating;

2. General risk, this risk is likely to make the principal suffer losses, but not all losses, this loss may be in 30%-50%, such losses refer to permanent losses, not to the floating losses caused by **** fluctuations, obviously this is caused by the judgment of the enterprise, of course, if the success of this operation may bring twice or even higher profits, then this risk is still worth a try, if the income itself is very limited, and take such a high risk, it is not worth it;

3. Very low risk, relatively certain returns. The very low risk here refers to the fact that you are very clear about the future of the company, although the stock price may fluctuate in the short term, but over time it will definitely be **, only need patience and persistence, of course, this kind of investment with strong certainty generally does not have a particularly high return, but if you are 70% sure, it is worth a try. Investment itself has two sides, risk and return are a pair of twin brothers, inseparable, every investment is faced with risk-taking, must be in the risk of controllable to pursue the maximum return.

Summary. Let's tell you about the steps to handle the ring guarantee:

1.Submit a written application and related materials to the local environmental protection bureau, and the materials that need to be prepared are: name approval letter, legal person ID card;

2.Business scope, housing lease contract, housing coordinate diagram, product raw materials, annual output of main products, process flow chart;

3.Then the Environmental Protection Bureau accepts the application and conducts an on-site inspection, first issues an environmental impact assessment report, and then goes to apply for environmental protection approval.

4.After all qualified, the certificate will be issued, and the rectification notice will be issued if it is unqualified, and then it will be verified on the spot again, and the certificate will be issued after the final qualification.

How much does it cost to ensure that the waste plastic pellet factory ring will be done.

Hello! The old plastic pellet factory ring before the waste fiber is guaranteed to be 60,000 to 100,000 yuan to be done. Because the destruction of the plastic ring is the most difficult and troublesome to do. The middle finch spends a lot of money.

Let's tell you about the steps to handle the ring guarantee:1Submit a written application and related information to the local environmental protection bureau, and the materials that need to be prepared are: name approval letter, legal person ID card; And check 2

Business scope, housing lease contract, housing coordinate diagram, product raw materials, annual output of main products, process dilemma flow chart; 3.Then the Environmental Protection Bureau accepts the application and conducts an on-site inspection, first issues an environmental impact assessment report, and then goes to apply for environmental protection approval. 4.

After all qualified, the certificate will be issued, and the rectification notice will be issued if it is unqualified, and then it will be verified on the spot again, and the certificate will be issued after the final qualification.

Conditions for the opening of a plastic recycling pellet plant:

1. The environmental impact assessment must be carried out in accordance with the national environmental protection laws and regulations, and then approved by the local environmental protection department.

2. Construct sewage treatment facilities that meet production requirements.

3. Main pollution: Generally speaking, it is mainly the cleaning sewage of waste plastics, as well as the waste gas pollution generated by chemical processing, and the treatment of solid waste after wastewater treatment.

Fourth, environmental governance: for the sewage situation must have a clear sewage treatment facilities, and then in accordance with the national wastewater discharge standards for discharge, for the treatment of waste gas can use activated carbon and other absorption of organic waste gas.

5. For solid waste, it is necessary to directly sign a contract with a qualified hazardous waste treatment institution, and they will carry out professional management.

According to customs statistics, as of August 31, 2018, 1.73 million tons of recycled plastics had been imported under the national general **, and the tax paid was 9.8 billion, an increase over 2017.

70,000 tons of recycled plastics were imported under other ** items, and the duty paid ** was 100 million yuan. In 2018, the overall import volume of recycled plastics nearly doubled compared to 2017. It is estimated that the total import of recycled plastic will exceed 2 million tons this year and is estimated to reach 4 million tons in 2019.

The prospect of the recycled plastic pellet plant is still very good.

Starting at 200,000.

The investment in a plastic pellet plant needs to start at 200,000. Investment in plastic pellet factory needs to set a site, water and electricity, repair pools and cement floors, build simple factories, recruit employees, do a variety of documents to build a factory, equipment investment in about 100,000, infrastructure investment of about 100,000 yuan, a total of about 200,000 yuan, but the later stage also needs 300,000-500,000 working capital, which is not included in the scope of initial investment.

Classification of investment risk:

According to the reasons for the formation of investment risks, it is divided into natural risks, social risks, economic risks and technical risks

1. Natural risks.

It refers to the risk caused by irregular changes in natural factors to the investment entity, such as **, floods and typhoons.

2. Social risks.

It refers to the risk of stupidity brought to the investor by unpredictable individual or group behavior, such as fraud, theft, dereliction of duty, etc.

3. Economic risk.

It refers to the risks caused by poor management or changes in market factors in investment activities, including operational risks, ** risks, interest rate risks and inflation risks. Economic risk is an inevitable product and inherent phenomenon of the market, so it is the core issue of investment risk management.

4. Technical risks.

It refers to the risks caused by poor technical design and management, such as system failure, substandard project quality or environmental pollution. <>

Summary. Hello, the waste plastic pellet factory is guaranteed to take 60,000 to 100,000 to be done. Because the ring guarantee of plastic is the most difficult to do, and it is also the most troublesome. So the money spent is relatively large.

What certificate does the waste plastic pellet factory need to do, and how much does it cost?

How many certificates are required.

Hello, dear waste plastics, envy of the grain factory ring guarantee to 60,000 to 100,000 to do. Because the plastic ring is the most difficult to do, but also the most troublesome. So the town difference money spent is relatively large.

To apply for the environmental protection certificate of the waste plastic pellet factory, the following materials need to be prepared: 1. A copy of the business license; 2. A copy of the organization's ** certificate; 3. A copy of the tax registration certificate; 4. A copy of the pollution source permit; 5. Copies of relevant laws, regulations, and standards; 6. Plant structure diagram and plant environment description; 7. Investigation report of the factory area and its surrounding environment; 8. Report on the discharge of pollutants from pollution sources in the plant area; 9. Report on technical measures for pollution prevention and control in the factory area; 10. Safety inspection report of pollution sources in the plant area; Ten.

1. Report on the concentration of pollutants from pollution sources in the plant area; Ten.

2. Environmental impact assessment report of pollution sources in the plant area; Ten.

3. A copy of the pollution discharge permit of the plant; Ten.

4. A copy of the factory safety production tour book destruction permit; Ten.

5. Other relevant supporting documents. The cost of handling the environmental protection certificate of the waste plastic pellet plant is generally the relevant agreement signed by the first department and the enterprise, and the specific cost needs to be communicated and confirmed with the local ** relevant departments.