How many situations are there when water ingress from Chevrolet Luxe engine oil? 10

The common failure points of water ingress inside the engine oil are:

It may be caused by damage in the cylinder and the interconnection of oil and water circuits.

It could be that the cylinder block is cracked, causing antifreeze to flow into the oil.

It may be caused by a bad oil radiator.

Hello, first solve the problem of burning engine oil, generally replace the valve oil seal and piston ring, and use 5w-30 engine oil. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, the oil-burning car needs an overhaul of the engine. Change the viscosity of the oil, I hope it can help you. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

It is advisable to change the oil after an overhaul of the engine. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, ordinary engine oil can, too good viscosity is low, but it is easy to burn more oil, I hope my answer can help you, if you don't understand, you can continue to ask me! Have a great day! [If you have a problem with the car, ask the car master.]

4S shop professional technician, 10 minutes to solve. 】

Hello dear, thank you for waiting. If the Chevrolet Lechi model has a situation where the engine oil is willing to fall, then the main considerations are the following reasons. The first reason is that the engine has signs of oil leakage, so this needs to lift the vehicle up, check it from the bottom of the vehicle, and deal with the oil leak if there are signs of oil leakage.

The second aspect is to consider that the engine of the vehicle has burned oil, if there is no oil leakage, then it is necessary to consider that the engine burns oil, this situation can be detected, the valve oil section of the engine is sealed, and there are piston rings. If the oil burn is more severe, the engine needs to be overhauled. <>

1. The port of the Lechi car oil is on the engine, and you can see it on the right hand side when you open the front cover.

2. It is generally recommended to change the engine oil every 5000 kilometers or half a year, but changing the engine oil also depends on the specific use of the car.

3. Lechi recommends the use of 5W-30 model engine oil, which is the standard of Chevrolet's original engine oil, even if it is recommended for maintenance in 4S stores, such as Mobil, Shell, Castrol and other well-known brands.

Hello. The performance will be reduced, if the maintenance is done properly, the reasonable use of good touch, you can continue to use. Hope it helps.

Hello, the performance is not as good as before. If my reply is helpful to you, please set it to the best, thank you!! Hello, the overhaul is definitely not as good as the previous one.

Take good care of it and open it for another five years. @2019

Hello, either the valve oil seal is not tightly sealed or the piston ring tension is not enough, resulting in the piston ring in the piston reciprocating movement, the oil is channeled to the combustion chamber, prompting the oil to burn! [If you have a problem with the car, ask the car master of the car. The professional technician of the 4S shop dismantled the hall and solved it in 10 minutes. 】

You seem to need to check the repair shop comprehensively, it is generally caused by the aging of the engine valve seal, and it is enough to replace the valve seal.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. Burning engine oil is caused by the following factors, as long as the following problems are solved, burning engine oil can be solved.

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem. In the past, the problem of burning engine oil could only be solved by dismantling and repairing, but now there is a plan to solve the problem of burning engine oil without dismantling and repairing.

Well, it is influential, such a basic common sense, anyone who drives should know it.