Do I need to apply to the heating company for heating in rural yards?

It depends on whether you heat your own home or go to the central heating of the heating company. Generally speaking, rural self-heating does not need to pay pipe fees to the heating company, because the heat source is provided by itself; If the pipeline of the self-built house in the rural area is linked to the pipeline of the heating company, and the central heating is used, it is sure that the pipe fee will be paid to the heating company.

Rural installation of radiator heating, has also become a kind of popular, rural installation of radiators become soil heating, rural soil heating installation is not much difficult, mainly more accessories, if you follow the following for everyone to provide the installation of heating on the drawing, to ensure that the installation of earth heating is not difficult for you.

1. Three installation methods of soil heating.

1. Natural circulation installation method.

The installed pipe should have a certain slope, there should be a certain height difference between the radiator and the boiler, generally more than meters, the diameter of the pipe is generally in DN-25 and DN--40, and the farthest end should generally not exceed 15 meters. The advantage is that the heating effect can be achieved completely by the method of natural circulation, and the disadvantage is that the temperature difference between the upper and lower levels is large, and the height of the radiator can not be installed too low, which is not beautiful.

2. Automatic pump circulation installation method.

The rise of floor heating in recent years is the deformation of this installation method, that is, the radiator is replaced with a geothermal pipe, and the advantage of this installation method is that the radiator can be completely placed on the ground. There is no need for a certain height difference between the heating stove and the heating stove, and it can also achieve a good heating circulation effect, and the installation is convenient and fast. The heating effect is remarkable and beautiful, but the disadvantage is that it completely relies on the circulating pump, which is unusable in areas where there are frequent power outages.

3. Increase the heating circulation pump method.

This method is based on the installation of natural circulation, and the heating circulation pump is installed at the outlet of the water supply pipe, which achieves a good circulation effect and can be used safely in areas where power outages are frequent.

Second, the installation steps of home heating.

1. Install the ambiguous sheet: determine the amount of ambiguous sheet in each room according to the size of the room, a group is generally composed of 10 to 15 pieces, and nail the purchased ambiguous sheet group to the wall with a hook.

2. Connect the water pipe: use an electric hammer to punch holes in the room, generally use a 1-inch steel pipe as the water pipe, and connect the water pipe with the gas sheet group tightly after the water pipe is threaded.

3. Connect the heating furnace: connect the upper and lower water pipes connected to the gas sheet with the inlet and outlet pipes of the heating furnace respectively, and tighten the gong wire.

4. Installation of accessories: A water funnel should be installed at the outlet pipe of the heating furnace, as well as a discharge valve, and a thermometer and exhaust valve can also be installed at the outlet pipe.

5. Water addition test: first fill the entire pipeline with water to check whether there is water leakage, if not, ignite the heating furnace for temperature test.

This should be applied for according to the regulations, because your usable area has already paid the heating fee, and the yard does not belong to the usable area and is not within the scope of heating.

Heating in rural yards does not require an application from a heat worker. Because it's your own business, don't apply.

Yes, you can. It's just that after buying radiators in rural areas, you may not be able to find professional radiator installers to install them, so you can only install radiators by yourself, but installing radiators by yourself is a hidden danger of installation, and it may leak or not heat if you are not careful, so you must prepare well before installation. So what are the preparations to do before installing the radiator yourself?

Let's follow the golden flagship flag brother to find out.

1. Install your own radiators to understand the water quality of your home in detail.

Generally, the water quality in rural areas is relatively better than that in the city, but the water quality in rural areas has more minerals, so the water quality of the radiator is still detailed in detail, which can also prevent the radiator from being corroded by the water quality after the installation is completed.

Second, the first thing to consider when installing the radiator by yourself is the location of the radiator.

The location of the radiator installation is related to whether the radiator in the room you are in can make the whole room have the key to the temperature inside, and the location of the radiator installation is also related to whether the radiator can be used effectively and energy-saving.

Third, after the above two conditions are ready, you have to start to check the purchased radiators, and we can consider the following aspects from the following aspects.

1. Check the factory Chinese quality certificate of each group of radiators, check the registered trademark, force, test pressure, inspection time of this batch of products, inspector marks and factory date book trademarks.

2. According to the classification of radiators in each room, they are transported to the radiator installation location. Specifications, factory date, and working pressure radiators must have the manufacturer's note.

Fourth, after you install the radiator yourself, you can prepare the impact drill, pipe wrench, flexible wrench, fixed wrench, screw screw, hammer, ruler, steel tape measure, line sinker, pencil and other tools.

Fifth, after installing the radiator yourself, you have to prepare, lead oil, expansion and drying test, flexible joints, plugs and other paving materials.

Heating installation shall be carried out in accordance with the relevant installation requirements, and the specific installation requirements are as follows: under the floor heating pipe of the upper part of the adjacent floor slab and the upper part of the residential floor slab of the non-heating room, as well as the perimeter of the radiant heating floor along the outer wall, the insulation layer shall be laid. When the insulation layer is made of polystyrene foam board, the thickness should be according to the following requirements:

1. The insulation layer is 20mm, the filling layer above the geothermal pipe should be filled with fine stone concrete, and the filling layer on the heating pipe should be laid with a steel mesh with a diameter of 2mm, and the spacing is 100-150mm, and the filling layer should not be less than 30mm at this time.

2. Inspection, commissioning and acceptance of ground heating.

3. The radiant heating system of floor heating starts from the laying of heating pipes and the installation of heat medium collection and distribution devices for pressure testing, and ends with the completion of the curing period of the concrete filling layer and the pressure retention construction.

4. Before the hydrostatic test, safe and effective fixing and protection measures should be taken for the pressure test pipes and components.

5. The test pressure should not be less than the static pressure of the system, but not higher. When conducting hydrostatic experiments in winter, reliable anti-freezing measures should be taken.

Precautions for heating installation:

1. When constructing the surface layer, it is not allowed to remove, chisel, cut, drill and nail the filling layer, and no object is wedged into the filling layer.

2. The construction of the surface layer must be carried out only after the filling layer reaches the required strength.

3. At the junction of the surface layer (stone, brick) and the internal and external walls and columns, 8mm wide expansion joints should be left (finally covered by skirting feet); When laying wooden floors, 14mm expansion joints should be left.

4. For wet rooms such as bathrooms, do waterproofing again in the upper part of the filling layer.

How many radiators to use or how big a stove to use, two things need to be determined:

First determine how much radiator to use, and then determine how much power the stove to choose, so that the radiator can be driven.

First determine the power of the furnace, and then buy the appropriate number of radiators according to the size of the stove, it is recommended to choose the first option.

Because the radiator depends largely on the production material, specification model, product brand, sales area and purchase channel, etc., and these factors cause a huge difference between the **. The same radiator manufacturer has different materials, different specifications and models, different heights, etc., and its best products are also different.

What kind of material do you need? What is the heating method of your community? What is the water quality over there?

If you are heating centrally, you should choose steel (copper and aluminum if the water quality is poor), and if you are heating, you should choose copper and aluminum. Central heating is a kind of intermittent heating (burn for a while and stop for a while), the water storage of steel is 5 times larger than the water storage of copper and aluminum, when the heating stops heating, the larger the water storage of the heating system, the longer the heat preservation time; Self-heating is self-burning, when the temperature reaches a certain level, the heating will not burn, the wall thickness of copper and aluminum is thin, the heat dissipation is fast, it is more energy-saving, and the corrosion resistance is good.

Take St. Lawrence as an example, this is the plan we drew up for our customers (see picture), three bedrooms, one living room, one kitchen and one bathroom, ****, steel radiators. If it is not ****, it will cost about 1,000 yuan more (taking into account the material, floor, yin and yang surface, community heating water quality and heating method, etc.).

First determine where the heating source comes from, recommend a wall-hung boiler, or air can be used for heating.

At present, the common radiators on the market in Nantong area are cast iron radiators, new steel radiators and copper-aluminum composite radiators, etc., the installation selection of radiator materials is not the same, according to the level of radiator raw materials, radiator products are also very different, cast radiators are the cheapest, copper-aluminum composite radiators are more expensive.

Note: A contract must be signed when purchasing radiators in the Nantong area. No matter how much the manufacturer promises, it is all verbal, and the interests of consumers cannot be guaranteed. When consumers buy, they must sign a sales contract, which states the responsibility that the manufacturer should bear, and in case of an accident, they can claim compensation by virtue of the contract.

Summary. Hello, the installation of heating in rural communities is also installed by the heating company, and you can use it as long as you open an account.

Hello, the installation of heating in rural communities is also installed by the heating company, and you can use it as long as you open an account.

The house in our hometown is divided and unheated.

I would like to install the radiator myself.

Then you have to report the heating company to install the heating fee, how to install it yourself?

At least you have to ask the installer to come to the door to install, these things also have security problems, you can't get them casually.

I know that I must ask the installer Wu Minzi or something, what I mean is that the house also belongs to the community house. On the 5th floor. You can buy your own radiators and then find a master to install them, how to install this.

When installing, from the next pipe of the heating company, and then start to install the heating pipe, and then install a valve after the installation of the heating pipe, as well as the filter slag draft, as well as the water inlet and outlet pipes, these words when you invite the master to come they will understand the installation, you must please understand Liang Chun to install it, otherwise it will affect the use.

1. Do a good job of heat preservation. To install heating in a self-built house, it is necessary to do a good job of insulating the room, otherwise the heat of the house will be dissipated, and it will not have the effect of keeping warm.

2. Choose a heating method. There are many ways to heat the house, you can burn coal, you can also use solar energy, and the form of heating also has floor heating, and the radiator must be selected in advance, suitable for your own heating method.

3. Perform the installation. If you want to install radiators, you should determine how many pieces of water heating you will install in each room, lay pipes on the ground in advance, and then lay the ground at the end.

1. Do a good job of heat preservation. To install heating in a self-built house, it is necessary to do a good job of insulating the room, otherwise the heat of the house will be dissipated and will not have the effect of keeping warm.

2. Megavolt selection heating method. There are many ways to heat, you can burn coal, you can also use solar energy, and the form of heating also has floor heating, and the heating bush reed must be selected in advance, suitable for your own heating method.

3. Perform the installation. If you want to install radiators, you should determine how many plumbers you need to install in each room, lay pipes on the ground in advance, and then lay the ground, and finally add water to test whether there is any leakage.

How big a piece to buy, when you look at the manufacturer's instructions, he shows that a column can bring a few square meters! In addition, they are calculated according to 95 degrees of water inlet, good flow rate, and good thermal insulation, and the household is basically not enough, and it should be 50-100% larger when buying.

What kind of coal stove you have to ask the seller because most of the coal stoves have no parameters, and they all depend on experience! It's better to buy a bigger one, because if it's bigger, you can burn a small one, and it won't be wasted! It's not hot when it's small, and the frequent coal changes are not hot!

The water temperature is not enough and the circulation is slow, resulting in hot sheets in the front and cool in the back.

Do you use it yourself, or do you want to make products, we make heating wires, if you can, we can communicate and communicate, and if you don't use electricity, you use fire