What do I need to prepare for installing radiators? What do you need to pay attention to when instal

The weather in winter is relatively cold, if you can install a radiator in your home, it is a more economical and affordable way to heat up, thenWhat accessories are needed when installing radiators？What should I pay attention to when installing radiators?

1. Expansion nails and hooks. They are a good and important part of fixing radiators to the wall. In today's increasingly aesthetically pleasing environment, consumers are more accustomed to hanging radiators on the wall, which requires expansion nails and hooks to have strong compression and tensile resistance to ensure that the radiators do not move and work safely.

2. Running wind. It is one of the indispensable accessories of the radiator, the main function is to vent the radiator, when there is air in the heating system, resulting in the radiator is not hot, loosen it, you can release the air in the radiator, so that the radiator circulates very well, because the wind is more in contact with air and water, pure copper or copper chrome plated alloy is usually used to prevent corrosion and ensure service life.

3. Plugging. It is used at the end of the pipeline, to prevent the leakage of the pipeline, to play a sealing effect, is the plumbing system device commonly used in the pipe fittings, it requires strong corrosion resistance, will not be corroded by sewage and wastewater, in the low temperature environment there is no freeze cracking and expansion leakage. The convenient manufacturing material is pure copper, and Satoria uses 110 grams of pure copper to ensure the quality of the plug.

What should I pay attention to when installing radiator accessories?

1.Originally, when understanding the radiator device method, we also have to compare the radiator device**, there are many types of radiators, so the detailed methods are also diverse. Assuming that the internal planning of the radiator has a baffle, it is very convenient at the time of connection.

However, for radiators without baffles, it is necessary to pay attention to the requirements for connection, such radiators are usually heated from below, and heat dissipated from above, and there is a difference between the upper and lower temperatures.

2.Other about the radiator device way, in addition to the existence of shortcuts, but also take into account its appearance requirements, some users in order to save the use of area, take into account the aesthetics of the appearance, so in the selection of radiator device method is very cautious. For other radiators with metal partitions, its internal structure cannot be seen through the surface.

Therefore, when purchasing radiators, it is convenient to consult professionals, not only to choose the most suitable radiators, but also to assist in the installation.

1 A home will be renovated during the summer or non-heating period, but it is easy to forget to install heating equipment at this time. Because in the warm season, heating cannot be used at all. However, in winter, secondary works are carried out if necessary.

It's troublesome. It has a great impact on our daily lives. Therefore, the heater should be designed and installed at the same time as the interior decoration.

2. When installing radiators, safety is the first element. In addition, consider the function of the radiator and choose a reasonable installation location, preferably under the window. This prevents the circulation of cold radiation and cold air. In addition, the indoor temperature is relatively stable. Do not get hot or cold.

3. When buying heating equipment, do not buy low-priced goods in the community. It is best to buy qualified radiator products in large building materials markets or regular stores, and you need to sign a purchase and sales contract with the manufacturer, ask for a warranty contract, and explain what is included in the money in advance to avoid hidden consumption.

4. When installing, you should consider the area of your room, the number of rooms, the characteristics of the heating system, etc., and purchase the appropriate model, material, and number of radiators. It is important to note that the material of the heating seat we choose must be in line with the heating environment of our community. If the oxygen content of the heating water is relatively high, steel radiators cannot be used.

5. When installing radiators, you must find a special installation company, and it is best not to install it yourself. Please be careful not to leak water during installation. The water pipes are straight.

Please use fittings at connection points to avoid bending of the pipe. In this case, the resistance of the pipe increases. It has an effect on heating.

6. After installation, please pay attention to the acceptance of the radiator. Heating systems are not real-time products and take time to confirm performance. Please do the necessary tests. After the installation was completed, a perforated test was first carried out, which proved that the radiator did not leak.

There are four indispensable accessories for household radiators, which are running air, plugging, hook and expansion nail.

The process of radiator installation is also quite complicated, in order to install a set of qualified radiators, it has a sequence, as long as the order is reasonable. So, what do you need to pay attention to when installing radiators? Let's follow the golden flagship flag brother to find out.

In the current types of home improvement radiators, open pipe installation and dark pipe installation radiators are the mainstay.

First, in order to install the radiator, it is generally divided into the following steps according to the operation specifications:

1. First of all, confirm the position of the hanging piece, regardless of the open pipe or the dark pipe, you must first hang the piece because so that you will not do stupid work when running the pipe, saving labor and materials.

2. The open pipe is on the wall, first use the ink fountain on the wall, and generally use a 25ppr pipe (6 points) to punch a clip every meter or so in the Beijing-Tianjin-Hebei area, which must be horizontal and vertical. According to the requirements, use a hot melter to melt at one time to prevent water seepage. to the heating area and connect with the inlet and return valves of the piece.

3. The dark pipe is also a slotted line on the wall, which can be connected in the above order.

4. Water pressure, which is the top priority of the whole project, is not sloppy, and it is also the touchstone for testing the quality of the project, first close the heating well inlet and return valve, inject water into the piece, and then connect the press machine with the radiator to start pressurizing, when the pressure gauge pointer stops pressurizing between to, don't forget to deflate. Because the gas generated in the water is discharged during water injection, the pressure is tested for 8 hours to confirm that there is no leakage, and everything is fine.

Second, the method and construction points of installing radiators in open pipes.

The surface-mounted heating transmission and return pipes are outside, which is suitable for old houses and hardcover houses.

Method: 1. Follow the plan and fix it in the corner.

2. Hang radiators on the wall holes.

3. Connect the pipeline.

4. It can be opened and used after the water test is pressed.

Key points of construction: First, the pipe of the radiator must be strictly and standardized, and the visual blind spot must be taken;

Second, the pipes for installing heating in open pipes adopt a sliding connection method, which is safer;

Third, it is best to set up the corresponding exhaust device at the high point of the system during construction, otherwise it is easy to be blocked.

3. The method and construction points of the radiator installed in the hidden pipe.

A method of laying heating pipes and water and electricity pipes in the home together with the water and electricity lines in the home. Therefore, the house needs to be in the rough renovation stage and suitable for the new house.

Method: 1. Open the pipe groove in the hydropower stage of the blank room.

2. Lay the heating pipe and connect it according to the plan.

3. Test the water injection pressure of the heating system and seal the groove.

4. Other construction projects are carried out, and after the wall is finished, the radiator is hung with holes.

5. Pressure the radiator system to eliminate water leakage.

Key points of construction: First, the time should be strictly grasped, and the first stage of construction should be carried out before the hydropower transformation or at the same time as the hydropower;

Second, the stamping test can not be saved, after the first stage of construction and the final completion, it is necessary to test twice to prove that there is no running, leaking, leaking, dripping place can complete the acceptance.

Whether it is an open pipe installation or a concealed pipe installation, the radiator must be mounted on the wall or on the floor. Generally, the ordinary concrete wall in the home can be directly punched and installed. Floor installation requires brackets, and attention should be paid to not hitting the ground pipelines when fixing holes on the ground.

Installing radiators during renovation has become a common practice for most families to heat in winter. However, there are many things to pay attention to in the installation of radiators, otherwise it will not only bring inconvenience to life, but also the heating effect is relatively poor. Let's take a look at the precautions for radiator installation.

1. Pay attention to the installation height. When installing the radiator, it is recommended to keep a distance of about 3-4 cm from the wall, about 20 cm from the ground, about 150 cm for the height of the pipe, and about 100 cm for installation, so as to ensure smooth air circulation around the radiator and better heat dissipation.

2. If the wall-hung boiler is used for heating, it is recommended to choose a radiator below the meter to ensure that the pressure of the wall-hung boiler can be brought with a dynamic radiator to ensure the heat dissipation effect.

3. Pay attention to the floor height. If you are a top-floor resident, it is recommended to choose a low-assembled radiator to avoid problems such as poor heating effect due to insufficient pressure. If you are a low-level resident, it is recommended to choose a high-pitch radiator to prevent problems such as bursting caused by excessive pressure.

For middle-rise or lower-floor residents, tall and low radiators can be selected, mainly considering cost performance.

4. Pay attention to the location. Radiators are generally recommended to be installed under windows, which is conducive to rapid heat dissipation, and can also be considered to be installed behind doors, in the corners of walls, etc., without affecting the overall aesthetics of the space.

5. Pay attention to water injection and pressure test. After the radiator is installed, it is necessary to carry out a water injection pressure test to ensure that the radiator itself and the installed interface are free of leakage and other problems.

Installing radiators requires a professional HVAC company, although radiator installation is not too complicated, but there is no preparation in the early stage of installation, which is likely to affect the later use effect, so what preparations do we need to do in the early stage of installing radiators?

Since the installation of heating is buried pipes, so the general heating construction state draft is the first step of decoration, more before the construction of water and electricity, some new decoration friends do not respect the mu to know, has signed a contract with the decoration company to start the date, may be caught off guard. There are certain conditions that should be met during heating construction. The first choice is for the owner to be present, and the heating company personnel and the owner establish the heating installation location, and then the water and electricity enter the site, and prepare to deal with the cement and sand of the cleaning bags and the heating trough, so as not to delay the construction progress.

The heat dissipation mode of radiator is conduction, convection, and radiation, and the steel radiator is mainly radiation, and the copper-aluminum composite and aluminum alloy radiator are accompanied by convection and radiation. The location of the radiator is installed and placed well, and the following is mainly about the usual position, and the specific placement should also vary from person to person, and the decoration style and furniture placement should also be considered.

Because the radiator is emitted, the installation position is generally suitable for installation under the window sill. This has two advantages: first, because the radiator is close to the ground, it can cause convection of all the air in the room, so the room temperature is balanced; Clause.

2. Once the cold air comes in through the crack in the window, the radiator heats it, which plays a role in preventing cold and forms a certain barrier to the cold air.

If the room has no windows, the living room is more placed on the narrow walls on both sides of the sunny side, which is more space-saving and relatively reasonable and economical. If you use a radiator in meters, you can put it on the side wall in the bedroom, as in the case of a radiator5th grade high**, you can consider placing it on the side wall of the bedroom with a window.

Steel heaters are similar to copper and aluminum, and the main attention is not to lay the steel heater bed too close, because the surface temperature of steel is slightly higher. The general principle of radiator installation location: under the window, next to the window, out of the way, and placed inward.

The installation of radiators needs to be coordinated with the decoration, and if the radiators are installed in old houses, the location of the radiators should be considered.

Radiator installation steps:

Clause. 1. Slotting the floor or wall.

Clause. 2. Lay the pipeline and protect the card slot.

Clause. 3. Install the water collector and separator, and wipe it clean after installation.

Clause. 4. Conduct pressure test on the radiator system.

Clause. 5. The installation of radiators and the construction of water and electricity should be carried out at the same time to avoid delaying the progress of registration.

Clause. 6. Connect the valve connector with the inlet and outlet valves together and install the radiator.

Clause. 7. Inspect and accept the entire system of radiators.

Collective heating radiator installation note:

The pressure test of the radiator system is a very important step, can not be ignored, the specific operation is: close the main connection valve key posture door, open the radiator water inlet valve with pressure test equipment to test, the experimental pressure should be times of the normal use of pressure, and not less than the experimental pressure of the entire community pipe network, 3-5 minutes without leakage is qualified.

Hello, when installing radiators, you should pay attention to the following points:1It should be inspected before installation to ensure that the quality of the radiator meets the requirements and that there is no damage.

2.Attention should be paid to the position of the radiator when installing, and generally it should be placed as high as possible indoors in order to better distribute the temperature. 3.

When installing, attention should be paid to the installation angle of the radiator, which should generally be kept as horizontal as possible in order to better distribute the temperature. 4.When installing, attention should be paid to the wiring of the radiator, and waterproof wires should generally be used to avoid damage from moisture.

5.When installing, you should pay attention to the installation method of the radiator, which should generally be fixed with nails or screws to avoid damage to the radiator from loosening. 6.

After installation, attention should be paid to the regular inspection of the radiator to ensure the normal use of the radiator. In short, the above points should be paid attention to when installing radiators to ensure the normal use of radiators. I hope it can be used as a reference for you, thank you for your inquiry.