How to prevent the two sides of canvas shoes from being difficult to open the glue?

Canvas shoes are generally not easy to open under normal circumstances, because canvas shoes are worn during the casual period. For example, walking, shopping and other daily normal pace walking situations. However, if you run in canvas shoes or play basketball, badminton and other more intense sports, it is more normal for canvas shoes to open the glue.

If it is the adsorption of the suede fibers that makes the glue completely penetrate into the surface of different levels, when the walking shoes are bent, the suede shoes and the glue are unevenly stressed at different levels, and it is relatively difficult to open the glue. But it's not impossible for canvas shoes to open glue. Because even the most expensive canvas shoes are artificially made shoes, and it is impossible to wear them for a period of time without breaking.

Wearing a pair of shoes for a long time may also cause the shoes to open due to wet shoes caused by sweaty feet. Therefore, if you want to avoid the glue opening of canvas shoes, learn to maintain the best way.

Method: Clean your shoes regularly, wipe them with a damp cloth (be careful not to use too much water), squeeze some toothpaste on them where there is a lot of dirt, and then clean them with a toothbrush.

Secondly, avoid soaking the shoes in water, exposure to the sun and fire to avoid deformation and upper breakage.

Do not expose shoes to corrosive solvents such as acids, alkalis, and oils. If you wear canvas shoes regularly, it's best to have two or more pairs of shoes to change.

I can't prevent it, I bought the **converse on both sides! However, the ** will basically stop when it reaches a certain level, and the imitation or cheap will be opened without restrictions. Everything has a lifespan, so let's take care of it.

If the shoes can't be washed, the glue will be gone! But I didn't wash it or opened the glue, but fortunately, it's only a little bit!

When walking, it is inevitable that the bent part of the foot will be opened.

The maintenance of canvas shoes mainly pays attention to the following points:

1) After cleaning, put it in a ventilated and cool place to dry naturally, do not put it in the scorching sun or bake in a high temperature place to prevent degumming or degumming and accelerate aging.

2) Non-professional rubber shoes should not be in contact with acids, alkalis, salts and other chemicals to avoid corrosion and degumming.

3) When cleaning, the force should be gentle and even, and should not be brushed violently to avoid breaking the thread, or brushing off the pattern and decorative parts of the shoe body.

4) Avoid contact with sharp and sharp objects to prevent scratches and scratches on the upper body.

5) For white canvas rubber shoes, do not contact with carbon ink and other items that are difficult to clean, after the canvas shoes of this color are cleaned, apply toothpaste or white chalk powder on the upper and body of the shoes, pay attention to be even, and then cool and dry to prevent discoloration, or find two pieces of white clean paper on the top of the shoe body and tear them off after drying, which can also prevent discoloration.

6) Shoes should be repaired in time if there are minor problems such as broken threads, dropped threads, or loose decorative parts, so as to prolong their service life.

7) For friends with heavy sweaty feet, you can spray some vinegar in the shoes before putting on the shoes, which can reduce the odor, and the canvas shoes should be cleaned regularly to prevent mold and smell.

8) Don't wash it in a washing machine, some people think that canvas shoes are bile-resistant, the price is low, too lazy to wash by hand, and they don't know that the decorative fabric of the shoe body is not the same as the shoe body, and it is easy to fall off and fade when washed in a washing machine.

Canvas shoes belong to vulcanized shoes, and once this kind of shoes is unglued, the adhesive effect itself will not be very good. The reason is that after it is glued in the shoe factory, it needs to be put into a vulcanization tank for chemical reaction to be firm.

Therefore, once the canvas shoes are glued, in principle, there is no help, and there is no way to repair them, so you can only hold the mentality of a dead horse as a live horse doctor.

Actually, if your shoes are only slightly deglued between the cloth and the glue surface, you can stick it, and it itself is bonded with polyurethane resin, which is the green leopard glue I used to use when I used to work in a shoe factory. You can search for "Green Leopard Resin Glue".

However, in any case, canvas shoes are vulcanized shoes, so the effect after repair is not as good as other shoes. If you want to sell glue and stick it yourself, it is recommended to provide it first, and let the boss show you if the shoes are still saved.

1. The wearing of canvas shoes is worn during the leisure period. For example, walking, shopping and other daily normal pace walking situations. However, if you run in canvas shoes or play basketball, badminton and other more intense sports, it is easier to open the glue.

2. Even the most expensive canvas shoes are artificially made shoes, which cannot be worn for a period of time without breakage.

Measures to avoid ungluing canvas shoes:

1. When the shoes are dirty, you can gently brush them with water dipped in detergent, then rinse them with water, and place them to dry them in a cool and cool shade to avoid direct sunlight. Do not use heating or open flame to dry, so as not to cause aging, glue opening, fading and serious deformation.

2. In order to use sneakers to look more beautiful, do not use too hard brushes or use too much force in the process of wearing or brushing, and do not use nails or sharp tools to pick the corners of these printed patterns.

3. Remember not to wear canvas shoes for strenuous sports such as football.

4. In order to prolong the service life of shoes, wash as little as possible.

Brushes, glue and repair subsidies need to be prepared. Here's how:

1. First of all, prepare the tool bristles, glue and repair subsidy, the size is the same as the fragment, as shown in the figure below.

2. Then dip the brush in the glue and brush the patching powder evenly on the glue, which can be thicker.

3. Immediately repair the patch, paste the damaged part firmly, and pay attention to alignment.

4. Press the repair limit on your hand for two minutes, and then you can't put on your shoes right away. It needs to be left for 12 hours.

5. Repair the shoes around as shown in the figure below, and you can find that the repair effect is very good.

Tools: adhesive remover, blowing fan, glue.

2. First remove the remaining glue on the shoes where the shoes are sticky, and then leave them for 10 minutes, and so on.

<>5. Then put the shoes in a cool and ventilated place, and put them on when the glue is dry.