Rescue... Tutorials are urgently needed, how to make spiral balloon arches

Each group of four balloons of the same color is tied to a rope and rotates around a rod.

Balloon chains and balloon arches are commonly used decorations for celebrations, this article will introduce in detail how to make balloon chains and balloon arches, this article takes the pink and purple balloon chains as an example.

1.Blow up the balloons and be the same size. Tie the blown balloons together, pink and pink, purple and purple.

2.Hold the pink balloon pair and purple balloon pair, then wrap one pink ball around the other purple ball.

3.Go around again, 4Such a set of four balloons is complete, which is the basis for making balloon chains.

5.Prepare a longer nylon rope or fishing line to wrap around where there is a hook (or doorknob).

6.Place the balloon set on the rope from top to bottom, and then use the rope to go around the pink ball and the purple ball twice, so that the balloon is fixed.

7.Take out another balloon set, stagger it with the previous balloon set, hold it with your hand, and then use a rope to circle two balloons in the two balloons, and then circle the two balls in the outer group twice.

8.Continuing in this way, a balloon chain is made, and the balloon chain can be hung indoors, outdoors, as a decoration. If you make a balloon arch, 5 meters long is generally enough.

9.Prepare an aluminum-plastic PVC pipe, which is the kind that can be bent and molded at will, and press into the balloon chain.

10.Prepare a welded base, if there is no such base, you can also use cement to do it, the specific method is: put some cement in a small round paint bucket, the paint bucket should not have a bottom, and then insert a tube on the cement, and when it is about to form, pull out the tube, remove the barrel, and wait for it to dry naturally, a bit like making honeycomb coal.

11.Insert the balloon chain that has just been fitted with the tube into the base, and the balloon arch is complete.

There are 5 steps to how to make a balloon arch:

1. Make an arch bracket: Make a "U" shape with a PVC pipe according to the size of the arch and fix both ends.

2. Blowing up balloons: two tied together to form a group, it is recommended to buy the whole package together, it is cost-effective, and there will be a small gift with it. Balloon clubs can use special pumps, which are much less labor-saving.

3. Two groups of balloons cross: Put all the balloons in two groups of balloons cross, and match them with colors such as red and white, or blue and red.

4. Tie the balloon to the bracket: take the bracket off the ground seat, A use the end of the rope to tie it to one end of the arch bracket, and then B takes the balloon set and puts it on the bracket. A passes through the middle of the 4 balloons with a thread, B takes the balloon set and places it on the stand, and A wraps the thread. Until the arch is tied.

5. Assemble: Fix the branch of the balloon to the desired position. You can also add beautiful decorations to the balloon arch, so that we can make our own Dongdong more characteristic and affinity.

The balloon arch making method can be divided into four steps: making the arch bracket, blowing the balloon assembly, tying the balloon to the bracket, and assembling the arch.

1. Make an arch bracket: according to the size of the arch, make a "U" shape with a PVC pipe or a random thing that can be bent and fixed, and fix both ends. Then prepare a pump, a line, scissors, and a certain number of balloons.

2. Blow the balloon assembly: inflate the balloon, you can use an inflator here, and then match the color, and tie two or three balloons together for later use. It is better to tie it in a cross shape.

3. Tie to the balloon holder: Wrap the rope from one end of the bracket to the other end, and then tie the assembled balloon to the bracket and fix it, preferably without leaving a gap.

4. Assemble the arch: prepare two bases, fix the two ends of the bracket on the base, and then fix the arch to the desired position. You can also add beautiful decorations to the balloon arch.

Precautions: Do not blow the balloon too much, or the gap is too small to increase the pressure and cause the balloon**. Keep the balloon size consistent.

Don't have more than ten colors, or they don't look very messy, irregular and unsightly. The balloon should have a certain thickness, which can block the arch bracket and be more beautiful. The width of the arch should be moderate.

Directions:

Do arch brackets: Make a "U" shape with a PVC pipe according to the size of the arch and fix the two ends. It is to prepare an aluminum-plastic PVC pipe or something similar, which can be bent and molded as you like, and used to make a bracket for pilling.

Make balloon sets: First blow up the balloon, the balloon should be as big as possible; Tie the blown balloons together, press the balloons together, and wrap the two balloons around each other to form a balloon group of four balloons. Repeat this step to decide on the number of balloon sets based on your needs.

Place all the balloons crossed.

Make balloon chains: Prepare a longer nylon rope or a sturdy string, take a balloon set and place it on the rope from above, and then use the rope to go around the two balls twice and the balloon will be secured. Take out another balloon set, stagger it from the previous balloon set, hold it with your hand, and then use a rope to circle the two balloons in the two balloons, and then circle the two balls in the outer group twice.

Repeat the cycle, and a balloon chain is made.

Do balloon arches: It is enough to make a balloon chain that is about 5 meters long, that is, to make a balloon chain that is long enough.

Final assembly: The aluminum-plastic PVC pipe is pressed into the gap in the middle of the balloon chain, make a welded base, and insert the balloon chain that has just been equipped with the pipe into the base.

First, to make a balloon arch, you need to prepare a bracket, a ring buckle and a balloon.

Second, blow the balloons one by one and tie a knot at the end.

Third, take a ring buckle with four notches on it, put the knot of the balloon into the buckle, and put four balloons in one buckle. In this way, it is possible to make many four-ring balloons.

Fourth, remove the bracket first, pass the pole of the bracket through the middle of the buckle, four balloons for a layer of noisy, wear the balloons layer by layer on the bracket pole until the bracket pole is full, and then connect the bracket pole and the base, and the balloon arch is done. Eggplant with land.

To make a balloon arch, first prepare the bracket, then tie the balloon, and then talk about how to make a balloon arch.

01 To make a balloon arch, prepare brackets, buckles and balloons.

02 Blow the balloons one by one and tie a knot at the end.

03 Take a clasp with four notches on it, put the knot of the balloon in the clasp, and put four balloons in one clasp. In this way, it is possible to make many four-ring balloons.

04 Remove the bracket first, pass the pole of the bracket through the middle of the buckle, four balloons as a layer, thread the balloons on the bracket pole layer by layer until the bracket pole is full, and then connect the bracket pole and the base, and the balloon arch is ready.

The balloon arch tutorial is as simple as this:

Balloon arches are a common prop for decorating places or celebrations. According to incomplete statistics, balloon arches have become one of the necessary props for weddings, birthdays, commercial promotions, exhibitions and other activities. And the production of balloon arch rolling omen has also attracted more and more attention and love from people.

Here, the author will give you a brief introduction to how to make a balloon arch.

1. Preparations

Preparation is important not only to help you do more with less in the rest of the production, but also to avoid unnecessary mistakes. The first thing to do is to choose the balloon you want to use.

In general, it is recommended to choose an aluminum film balloon with a certain elasticity and sort it according to the color of the need. Next, determine the accessories needed according to the size and shape of the arch, such as beams, columns, pedestals, etc., as well as tools such as air pumps, scissors, suction cup hooks, etc.

Second, the production steps

Once the preparation is complete, it's time to start making. First of all, the aluminum film balloons need to be inflated according to the desired color and quantity, and then kinked to become a balloon "bead".

Next, string the balloon beads into a balloon chain as needed and secure them with a thin transparent wire or nylon string. Then, according to the shape of the designed arch, the balloon chain is bent into a bow shape and fixed with accessories such as beams and columns. Finally, place the base on either side of the arch and adjust the position to make the arch more stable.

3. Production skills

Although the balloon arch may seem relatively simple to make, it still requires some crafting skills. First of all, in order to ensure the quality of balloon making, it is recommended to use a professional finger air pump to inflate.

Secondly, when making balloon chains, the length of each section should be kept consistent to avoid swinging or offset. Finally, be careful not to miss any balloons when fixing the balloon chain, otherwise it will affect the overall effect.

Through the above simple production steps and production skills, I believe everyone can easily make a beautiful balloon arch. Of course, if you want a better production effect, you can also refer to some professional balloon arch making tutorials. In short, making balloon arches can not only exercise our hands-on ability, but also allow us to show more unique charm in the activity.

The balloon arch modeling tutorial is as follows:

1. First of all, make a semi-circular skeleton and fix it with a bucket base at the bottom. Position the ball measuring device 20 cm. Then inflate the blue-white balloon evenly and tie it into a knot. The balloons are overlapped on the freshly made semi-circular skeleton.

2. In this way, the balloons are overlapped in the same way until the skeleton is full. One less tweak, a marine-themed spiral balloon arch is made.

Expanding Knowledge – Balloons

1. A balloon is a sealed bag filled with air or some other gas. Balloons can be used not only as toys, but also as a means of transport. There are many types of balloons.

2. Now it mainly introduces the balloons produced by natural latex, which can be used as decoration, the arch made of the opening ceremony, the advertising pattern can be printed as publicity, the photo of the wedding couple can be printed as a congratulations, the dance party, the newlyweds' float and so on.

3. Now the balloon has become a beautiful scenery and is more and more favored by people! Balloons used to be called "eggplant" as a toy, and there was a small bamboo whistle at the opening of the balloon, and when the balloon was blown full of air, the mouth would be very loud.

4. Balloons can also be used as decorations and as a means of transportation. If the balloon is large enough and the gas inside is lighter than the same volume of air, the buoyancy generated exceeds the weight of the airbag and attached objects (e.g. gondolas, hot air balloons, etc.), the balloon can be raised.

Inflate the balloon, then tie it to the arch and adjust the angle. Specific steps:

1. First of all, inflate the balloon.

2. The sock god then cut a section of about 15cm of thread and folded it in half to tell a big loss.

3. Then tie the two balloon pores to each other.

4. Take two pairs of tied balloons, place them in a cross shape, and tie them together with 20cm thread.

5. The next step is to make the balloon arch. Tie the balloon to the arch and adjust the angle.

6. Finally, tie the entire arch frame with balloons.

Note imitation auspicious matters:Blow up the balloon to be as consistent as possible. When tying the blown balloons together, pay attention to the color matching.

How to make a balloon arch:

1. First of all, make a semi-circular skeleton and fix it with a bucket base at the bottom. Position the ball measuring device 20 cm. Then inflate the blue-white balloon evenly and tie it into a knot.

2. Cross and overlap the balloons on the newly made semi-circular skeleton.

3. Cross and overlap the balloons in the same order until the skeleton is full. One less tweak, a marine-themed spiral balloon arch is made.

4. To make a balloon arch is to make the balloon size uniform, and the spiral direction of the balloon when it crosses and overlaps.

Think about anything.