After one click recovery of my hard drive, only the C drive partition can I still get back the origi

You can get it back, but you have to be able to use software, it takes about 3 or 4 hours to recover, I don't remember very clearly, it should be called flaget software can, this is your own way. If it's really important, you should go to the computer hospital or Jiangmin Center to have a look.

If the partitions are changed, it will be impossible to get them back, if you don't believe it, try their methods, it's impossible.

Try this software with finaldate, but new data has already been written into your sector, so there is no guarantee, only good luck!

Anyway, even if the hard drive is formatted, it can recover more than 70% of the data. Directly find the data recovery personnel in the computer market to help you recover it, ** is generally not expensive, I had such an experience once, I thought it was all over, but it turned out to recover nearly 80% of the data, and the loss was minimized.

This problem is actually very simple, don't use any software, I've encountered this kind of problem before, this is a problem with the ghost version of the system, in fact, your hard disk data is not lost, but the drive letter is not displayed.

My computer" right-click, "manage", "disk management" and look inside, is there still several partitions, but there are no d, e, f these drive letters? All you need to do is right-click on them and "change drive name and path" again.

Very unlikely! Unless you're looking for a professional data recovery merchant! It's usually expensive, though! It is recommended to back up your data later!

Take Windows 7 as an example, demonstrate how to restore the partitioned hard disk to the original partition, the steps are as follows:

Windows computer only has a C drive, can I repartition it without affecting the data? The answer is yes, and it's very simple.

Many people are familiar with the Windows system, but they are also unfamiliar. It is said to be familiar because the computer operating system that everyone uses daily is basically a Windows system. It's strange because Windows has a lot of useful features that you never know, such as Windows Disk Management.

Open Explorer, right-click on the computer, and select "Manage" to open the computer management module. You can also right-click on your computer's icon directly on your desktop to open this window.

Find "Storage - Disk Management" from the tree directory on the left, and the disk information of the current computer will appear on the right.

As can be seen from the figure, there are currently two hard disks in Xiaoyu's computer, with a total of 4 partitions. If your computer has only one hard disk and only one partition, the information displayed here will look much less.

The next operations on the lossless partition of the disk are done on this interface. The process is to divide a portion of the partition with a large enough remaining space and set it as a new partition.

Right-click the disk you want to partition and select Compress Volume.

The system begins to test the disk partition to determine the maximum capacity that can be partitioned.

Wait a few moments and the system will be done.

Here are 4 important stats:

Total Capacity Before Compression: The capacity of the current partition. If there is only one C drive, this capacity is the available capacity of the disk.

Available Compressed Capacity: This indicates the unused free capacity in the current disk partition.

Enter the amount of compressed space: indicates how much disk space needs to be removed from the partition.

Compressed Total Size: indicates how much capacity remains in the partition after it is removed from the partition.

where the sum of the Input Compressed Space Amount and the Compressed Total Size equals the Free Compressed Space Size.

Once you understand the above concepts, you can move on.

Enter the corresponding amount of compressed space so that the total size of the compressed partition can meet the daily use of the partition. It is generally recommended that the C drive leave 50GB of space.

Once you've confirmed that everything is correct, click "Compress" to start freeing the excess capacity from the disk.

After a few moments, you can see that there is free disk space freed up.

Then right-click on this unallocated disk partition and select New Simple Volume to repartition the free capacity.

Next, select the capacity of each partition according to your needs. If the capacity is sufficient, it can be divided into multiple partitions.

After that, I will format the new partition and I will be able to see the partition I just created on my computer.

You can delete partitions other than the system partition and merge the partition space into the system partition.

Take DiskGenius as an example, the detailed steps are as follows:

2. Click on the partition, right-click and select "Delete Current Partition".

3. Select "Yes" in the pop-up window. Repeat the above steps to delete other partitions that you don't need.

4. Click "Save Changes" in the upper left corner of the main window of the software and select "Yes".

5. Right-click on the deleted partition and select "Allocate Free Space".

6. Here select Assign to F drive.

7. The allocation confirmation window pops up, click "Yes".

8. Wait for the progress bar of partition adjustment to complete.

9. After the progress bar is finished, click "Finish", and the SSD will be restored to a complete hard disk.

Partition Magic is a very good disk partition management software, which can realize dynamic partitioning and lossless partitioning of hard disks, and supports large-capacity hard disks, which can easily realize FAT and FAT32, NTFS partition conversion between them, and at the same time, it is very convenient to realize partition splitting, deletion, modification, and can also realize multi-C disk boot function.

When I restore it with a CD, it is the original area, and the factory is the state.

If you use a hidden partition restore, only the C drive will be restored.

It is not possible to install 7 and then XP

Only xp first and then 7

1. If you don't want the information in it, just delete the disk partition.

Step 1: Right-click on My Computer to manage storage and delete it.

2. If you still want the data inside, it is best to back up the data first and then delete it.

Then you can only format the boot disk and then reinstall the system! It is better to have at least two areas, one to install the system, one to file the movie, etc. If you want to change it to two disks, you can change it directly with software!

You can partition that is not easy to do, directly on the computer desktop right click on my computer -—— management - disk management, delete all 6 partitions of your mobile hard disk, repartition, and only divide it into one area when dividing.

If you go to Disk Management and take a look, you will know that the bottom is all arranged, and one row is an independent storage part.

Others are good to say, I just want to remind you that data is priceless, and directly deleting the partition is terrible to damage the data of the original partition, I recommend you to consider it carefully, of course, if there is no important data when I didn't say it, it is pure kindness!

o(∩_o