The laptop keyboard got into the water, is it serious

It's a serious matter if there is too much water: water is the most direct killer of laptops, but there are also many people who tend to ignore a lot of potential "water". As you know, the motherboard of a notebook is much more integrated than that of a desktop due to its small size, which leads to a relatively high production cost.

If an accident occurs on the motherboard, the cost of replacing the motherboard generally accounts for about one-third of the whole machine, because this kind of accident is generally a man-made fault and is not included in the warranty, so the repair cost can be said to be jaw-dropping. The motherboard maintenance cost of high-end products will be more than 5,000 yuan.

How can I avoid being hurt by water killers? First, keep the environment in which the laptop is used dry. Second, try to keep a certain distance from water while using the notebook, such as drinking tea while using the notebook, using the notebook when your hands are wet, etc. are all bad habits, and it is easy to let the notebook get into the water, thereby damaging the notebook.

Water ingress can easily damage the laptop motherboard.

If a sudden situation causes the laptop to get into the water, we must not panic. First of all, I want to press the power button as fast as possible to cut off the power (don't shut it down in the usual way, otherwise your motherboard may have been short-circuited and burned.) Then, remove the laptop's battery (this is the first one that needs to be removed, and the action must be fast) so that the battery does not continue to power up the motherboard.

Immediately tilt the notebook over, let the liquid flow out as much as possible, the author has seen some articles say that the notebook is dried with a hair dryer, it seems that some friends follow suit, the author thinks, this method can not be used, you may not have seen the internal structure of the notebook, now there are basically a lot of plastic components inside the notebook, if the hair dryer blows, it is easy to cause these plastic components to be heated and deformed, making the situation worse, even if you want to blow it must be blown with cold wind.

We can leave the laptop in a ventilated place to dry in the shade for three or four days to allow the moisture in the body to evaporate naturally. After three or four days, we put on the battery, plug in the power supply, and try to see if we can turn it on, if not, then we can only send it for repair. Some friends may splash water on the keyboard, compared to the front motherboard water can be said to be more lucky, in order to prevent water from further damaging the keyboard printed circuit, we should immediately shut down the power to cut off the power supply, and remove the battery.

Then turn the laptop upside down at 180 degrees, and let the water in the keyboard flow as much as possible. After the water is completely clean, turn on the device again to see if all the keycaps are fully effective. If you're unlucky and something happens to the motherboard, you'll have to send it to the repair station for repair.

Hope it helps.

Generally, high-quality NB are waterproof, and the power is off quickly when the grade is low, so bake it.

Quickly turn off the power, wipe the water on the keyboard, for safety, blow the laptop with a hair dryer, let it dry for 1 day and then turn it on.

This depends on your luck @ If you're lucky, you'll be fine.,But under normal circumstances, this book is flooded.,If it's not charged in the case of little impact.,Use a hair dryer to dry it.,But if there's electricity, it's easy to burn out the motherboard.,Or something.。 If the computer is designed with that waterproof function, it may be less harmful, but it will still hurt! The more water, the more severe the effects are likely to be!

As for the treatment method after the water ingress, there is a lot of talk about upstairs and downstairs, so I won't say more! Hope mine is helpful to you and good luck!

It shouldn't matter much, you can disconnect the power supply first, including the battery, first blot the water with a towel, then dry it with a blow dryer, turn it upside down and put it in a ventilated place for four hours and then try to see if each key is available, if it is available, it doesn't matter.

If you don't worry,You can try to remove the keyboard,Carefully check it to see if there is water,Generally speaking, as long as it is not completely immersed in water,Water will not flow into the host,I have dismantled a lot of notebooks,It shouldn't be wrong。

1. Unplug the power cord of the computer immediately, and then forcibly turn off the laptop. If you accidentally pour water or juice into the gap of the laptop, then the water or juice will quickly enter the core area of the computer keyboard, if your notebook does not get the electricity, then it is not only the keyboard area of the computer, but also burn the CPU and motherboard, so once the keyboard enters the water, we should cut off the power cord of the computer within 30 seconds at this time, and then forcibly shut down to prevent the possibility of short circuit in the laptop. 2. Hold the laptop upside down on the desktop for 5 minutes.

The purpose of this is to allow some water to flow out of the notebook, so that the water cannot enter the most basic core part of the computer, so that the water can not continue to enter the core part of the computer, and then continue to dry the keyboard. 3. Carefully wipe the surface of the keyboard with a highly absorbent towel. Don't panic, calm down, find a highly absorbent towel or soft cloth to gently wipe the water stains on the water-soaked keyboard, or prepare a pack of cotton swabs to wipe clean in the subtle crevices to make sure there is no liquid left on the surface.

4. Give the laptop a dry and ventilated space. Most of the multi-person hands-on ability is not strong, some computers are still under warranty, and they can't unscrew the machine without authorization, therefore, we only need to find a dry and ventilated corner, put the laptop with water into the water normally there, depending on the amount of water intake, keep at least 12 hours of drying time, drying time is greatly affected by the season and weather, please be sure not to be anxious, be patient.

1. First of all, immediately turn off the power of the laptop system, and remove the power cord as well as the battery at the same time.

2. Wipe the liquid on the surface of the laptop keyboard and the machine with a clean rag or facial paper.

3.Move the laptop near the sink and tilt the laptop 90 degrees to pour out any liquid remaining inside the computer system and keyboard.

4.Use a clean cloth or tissue paper to wipe the liquid on the keyboard and the surface of the machine again.

5.Leave the laptop to dry for 24 hours to allow the liquid inside to dry, and do not use a hot air dryer to dry the case to avoid overheating and deforming.

6.Reconnect the power of the laptop and try to turn it on, if it can turn on normally, please back up the important data in the computer first.

7.Regardless of whether the laptop can be used normally or not, it is recommended to contact the official after-sales service of the notebook immediately after the test and arrange for testing and maintenance, so as to avoid sudden failure caused by oxidation and rust.

The notebook keyboard is flooded,Shut down immediately to clean up the watery parts,You need to disassemble the notebook to clean up the water stains,It shouldn't be a problem to shut down immediately as soon as the water enters,If you don't disassemble the machine,It's pulled out by the battery,Take it to the repair shop。

Turn it off immediately, then pour out the water, dry it with a hair dryer or in the sun, and if it still doesn't work, send it to the aftermarket.

Today's keyboards can be said to be waterproof, just dry them with a hair dryer. If something has gone wrong, it's best to get a new one.

The laptop keyboard got into the water. It needs to be dried before it can be used later.

If the keyboard has been flooded, then do not operate the computer at this time in the first place. The first time you should open the back cover of the laptop directly, and clean the water root thoroughly before you can try to open the computer. Because when there is moisture, it is easy to damage the motherboard.

1. Unplugging the power supply and battery, and the speed of power failure directly determines the severity of the damage to the notebook. Don't start shutting down the shed slowly, and wait for the system to shut down normally and then cut off. If it's slow, it's quite dangerous.

2. Pour out the water immediately according to the direction of the water intake, and quickly dry the water with a dry towel or paper towel. If there is water on the top of the keyboard, immediately turn the keyboard down (be careful not to let the water flow into the LCD screen), and try to pour out the water to avoid more water entering the motherboard.

3. If the keyboard gets water, remove the keyboard and observe whether the water has entered the motherboard. Carefully dry the front and back of the keyboard with a paper towel. If possible, you can use a hair dryer to dry it with cold air, and be careful not to use hot air, because the keyboard keys and other keys are plastic, which is not resistant to high temperatures, do not use hot air, and avoid blowing damage.

If the liquid is cola, vegetable soup, etc., you need to remove some of the buttons and carefully scrub them with pure alcohol. Because cola and other substances contain sugar, if it is not clear, it will corrode the wiring over time and cause damage to the keyboard.

4. Completely disassemble the motherboard, if you don't know how to disassemble the motherboard, it's best to ask a friend who knows more to help disassemble it. Observe whether there are water stains on the motherboard, and if so, carefully wipe it clean with pure alcohol. I use high-quality plate washing water to scrub the motherboard in notebook repair, but this kind of washing water is generally not available, and it is difficult to buy it in the electronics market in Nanjing, so it is not the kind of ordinary plate washing water.

This can be replaced by pure alcohol, Note 1 must use pure alcohol, not aqueous alcohol. Then dry the motherboard, or the hair dryer should not be too high, and pay attention to protect the plastic connectors on the motherboard.

5. Carefully dispose of the moisture inside and outside the laptop shell, put the treated motherboard and keyboard in a dry place for one to two days, and then confirm that all the moisture has dried thoroughly before assembling it. It must not be powered on and turned on before processing. Because the general user has no professional drying equipment, it is necessary to let many accessories be thoroughly dried as often as possible.

Summary: If the machine still won't turn on after the above 5 steps: then it is likely that the internal circuitry of the laptop has been damaged, or the motherboard has been short-circuited. In this case, the only way to do this is to send the repair service.