Can imported BMW parts be installed in domestic cars?

The first question: if the parts of imported cars and domestic cars are generic, then it is possible. Second question:

When buying imported auto parts on the Internet, you should choose carefully to avoid buying fake accessories, and the gains outweigh the losses. You can take a look at the car assistance network. Their imported auto parts are more cost-effective, the channels of imported parts are regular, and the price is very transparent.

In addition, it depends on what the parts are, the rubber parts have wax film on them, the nails are pressed with white traces, and the external dressing looks at the label, there are the manufacturer's original text and serial number, mainly looking at the original text and serial number of the packaging of the accessories It's too professional, you can go to the place where the car is sold to ask a few more customers to know Please tell me after understanding clearly, thank you very much! You can't see this, only those who buy the goods know that it is best to fix the place to repair the car, and it is good to be familiar with this This is to ask the person who sold the goods to you. It depends on what the parts are, the rubber parts have wax film on them, the nails are pressed with white traces, and the outer dressing looks at the label, there are the manufacturer's original text and serial number, mainly looking at the original text and serial number of the packaging of the piece, it is too professional, you can go to the place where the car is sold as a customer to ask a few more to know Please tell me after understanding clearly, thank you very much!

You can't see this, only to know that it is best to repair the car in a fixed place, and it is recommended that consumers need to replace spare parts when the car fails, such as car clutch parts, brake system accessories, etc., simply choose domestic goods, ** can be a lot cheaper. If you want to use imported spare parts, don't blindly listen to the introduction of the repairer, it is best to check the original spare parts provided by it one by one before maintenance, if you find that the packaging is damaged or there are obvious problems, such as too vague printing, foreign language errors, etc., you can ask it to be replaced, and consumers with conditions can also ask relevant professionals to check, confirm that it is consistent with what the repairer said and then agree to repair.

The meta repair part code refers to the repair parts that increase or decrease in size on the basis of the standard size, and are numbered in the order of increasing or decreasing their size. Its code is represented by two Chinese pinyin letters, the first letter indicates the size group of the repair part, and the latter letter is the code of the repair part, which is represented by X. For example, a repair part has three sets of sizes, and their codes are bx, respectively.

When the standard size of the repair part of the group is changed to affect the interchange, the size group code should be changed accordingly, and its letters should be arranged backward according to the last letter used before the change. If the change affects the interchange, the code of the standard size is E, and the corresponding repair part code is FX, GX, HX, etc.

It's best to ask before using it.

Yes, it can be used interchangeably and the parts may not be so good.

No, the model of accessories is different for different cars.

Yes, as long as the size can fit and combine with other parts.

There are some parts that can actually be used universally.

There are some problems with the common parts and components, and it is true that they can be universal.

Different parts are installed in different places, some can and some cannot.

No, each car has its own individual accessories.

Some can't, some can't, and many accessories are universal.

Some can be used universally, and some can't.

Some can't, some can't, depending on what part it is.

General parts are available. Look at what parts.

If it's some generic parts, it's fine. BMW has a lot of common parts for BMW Brilliance and BMW in Germany. It's just that the quality is not the same.

Hello. Pure imported BMW X5 auto parts in the domestic BMW 4S shop.

The widgets are made with original parts.

Large parts need to be imported from abroad, and the waiting time is generally relatively long, ranging from 3 months to a year.

Imported auto parts.

You can go to JD.com or Chezhu to check it out.

If you want original parts, it takes time, and the money is relatively more. It takes time for a 4S shop or repair shop to help you place an order. Of course, if you want to find a trustworthy store, if you don't know what to say, it will be easy to suffer, losing money is a small matter, and if you put it in your heart, it will be a big deal.

To put it simply, it's easy to do things when you have money!

The parts of imported cars are all imported, and some parts of domestic joint ventures are domestically produced. Imported car market answer.

Hello, first of all, the BMW X5 cars are imported in China.

Therefore, the original auto parts of X5 also need to be imported from abroad, but the X5 parts that have been imported are not necessarily all original imports.

The domestic imported auto parts industry is rife with fakes.

But the inside of the 4S store is all original.

You can go to JD.com or Chezhu.com to have a look.

Yes, this car is not yet domestic, and many accessories have to be imported.

Hello. If you say. How can this be a lie?

If you need accessories, you can find them in this fitting room. If you really can't find it, you can go. This is the largest in China.

Auto parts Guangzhou Chen Tian reputation. Although it has moved now, it is still the most complete parts factory auto parts, I hope it will help you.

BMW Brilliance is a domestic BMW, the initial use of ckd form, ** difference is not very big, now the localization rate is gradually increasing, but the key components are still imported, BMW does not emphasize where to produce, but emphasizes "BMW manufacturing", emphasizing that the quality of BMW in the world is the same, there should be no problem in terms of quality.

Now the state stipulates that domestic vehicles must have Chinese logos, Audi, Mercedes, etc., but it seems that BMW has not found it, may be there a logo I did not see, if there is a Chinese logo, then it must be domestic, the current domestic is 3 series and 5 series, 325i and 530li below the model, 330 is imported.

In addition, the domestic production of the model will generally not have the same model of car imports, the original domestic BMW 5 series production is the standard version, so the 530i below the stop imports, now the domestic BMW has become an extended version, like 530li, and the standard version of the 530i has become an imported car, for no identification can only be judged by the model and production year, of course, there is a manufacturer's signage in the engine compartment, if you know more about the car, you can judge by the body number under the front windshield, It contains several letters that indicate the place of production.

It is not China Brilliance Automobile Manufacturing Company and Germany's BMW Automotive Company in China to jointly create BMW Brilliance in the form of a joint venture, of course, the cars produced in China are also German BMW models, and BMW provides technical support, China also provides manpower, provides simple accessories, and provides sales channels.

The purpose of the joint venture is to localize.

1.Reduce the cost of producing automobiles.

2.If it is imported, imported cars will be taxed very high, so that the price of BMW cars in China is high, which has a great impact on its sales, and Audi has already been made in China, in Germany Audi can not be compared with BMW at all, just because Audi is domestically produced in China to occupy the market, so BMW's sales in China are far less high than Audi!

No, I don't. BMW Brilliance is made in China, but there are some important components that are imported.

BMW Brilliance is a domestic BMW, the initial use of ckd form, ** difference is not very large, now the localization rate is gradually increasing, but the key components are still imported, BMW does not emphasize where to produce, but emphasizes "BMW manufacturing", emphasizing that the global BMW quality is the same, there should be no problem in terms of quality Now the country stipulates that domestic vehicles must have Chinese logos, Audi, Mercedes, etc., but it seems that I did not find that BMW has it, it may be that there is a logo I did not see, If there is a Chinese logo, it must be domestic, the current domestic is 3 series and 5 series, 325i and 530li below the model, 330 is imported In addition, the domestic production of models generally will not have the same model of car imports, the original domestic BMW 5 series production is the standard version, so the 530i below will stop importing, now the domestic BMW has become an extended version, like 530li, and the standard version 530i has become an imported car, For those who do not have a mark, they can only be judged by the model and year of production, of course, there is a manufacturer's sign in the engine compartment, and if you know more about the car, you can judge it by the body number under the front windshield, which contains several letters indicating the place of production.

The landlord is now entering a misunderstanding,,All since。

There is only one ball BMW. Brilliance is only a coerced partner under China's pre-existing system. You will find that WFOEs are not allowed in China.

If you want to establish a production base in China. It must be a joint venture with a domestic enterprise. In addition, the automotive industry chain is very large.

N multi-plant cooperation is required. BMW's market spans the globe. There are several factories around the world.

For example, in China, if the corresponding parts factory is established, the investment will be quite huge. And many raw materials still need to be imported. In this way, it is not as good as a few large first-class manufacturers to concentrate on the production of accessories and send them to all over the world for assembly.

At the same time, centralized procurement, quality can also ensure global consistency, ** will be relatively low. So in the case of BMW, the cars produced in China are basically imported. Domestically, it is basically only responsible for assembly.

Like the few domestic ** merchants mentioned upstairs, they do have them, but they are built on the old 5 series. The current **5 series, including plastic bumpers, are imported. I just ordered one from Germany a few days ago.