The Oaks timer light flashed six times, and the Oaks air conditioner timer light kept flashing

The timing light flashes 6 times, the fault is the outdoor ring temperature sensor fault, check the sensor, the sensor socket is in poor contact, the sensor circuit.

If it is determined that the operation of the air conditioner is not controlled by the timing mode and the timing light is always on, it is a local functional failure of the computer board that does not affect the normal use, and you can leave it alone.

After about 30 minutes of normal operation, the machine will automatically shut down, the timing light will flash, and the remote control will not respond, first determine whether there is a lack of refrigerant, resulting in abnormal sensor feedback temperature of the evaporator.

When the air conditioner fails, you can go to the air conditioner fault network to inquire, down to the brand and model of the air conditioner, and the universal remote control can go to the universal remote control area to inquire.

When encountering a failure of the air conditioner, we must strictly follow the scientific procedures, and do not act blindly and disassemble at will when the situation is unclear, the fault is unclear, and there are countless in the heart.

The consequences often amplify existing faults, increase operating costs, shorten the normal service life of equipment, and lead to early scrapping of equipment.

1.The first thing you need is a Unicom mobile phone number.

2.Please bear any problems that occur after using the software.

3.Not all regions support the value-added service after opening, it is a success[**]Note:The above member software has the text message in the picture, don't reply y That is not the successful opening of the successful opening will not have this text message!

1.The first thing you need is a Unicom mobile phone number.

2.Please bear any problems that occur after using the software.

3.Not all regions support it, and if you can't find it in the value-added service after opening, it will be successful.

csv packs up and says you're where you're on.

[The timing light flashes 15 times], the fault is, the single-chip microcomputer is reset when the instantaneous breakpoint is broken, and it will automatically reset after checking and stopping for 3min.

The timing light flashes 14 times], the faulty single-chip microcomputer reads the EEPROM data incorrectly, check the EEPROM, single-chip microcomputer. 【The timing light flashes 12 times】, the fault is that the temperature of the outdoor heat exchange sensor exceeds 70 when refrigerating, check the outdoor fan, the outdoor heat exchange sensor is too dirty, the outdoor heat exchanger, the sensor circuit.

The timer flashes 11 times], the power off protection is instantaneous when the fault is faulty, and it will automatically reset after checking and stopping for 3min.

The timing light flashes 10 times], the fault cause is the power supply overvoltage and undervoltage, check the range of power supply, power supply voltage detection circuit. [The timing light flashes 7 times], the fault is the failure of the outdoor heat exchange sensor, check the sensor, the sensor socket is in poor contact, and the sensor circuit.

The timing light flashes 6 times, the fault is the outdoor ring temperature sensor fault, check the sensor, the sensor socket is in poor contact, the sensor circuit.

The timing light flashes 5 times], the fault is overcurrent protection, check that the refrigerant is overfilled, the power supply voltage is low, and the current sensor circuit.

The timing light flashes 4 times], the fault is that the temperature of the compressor temperature sensor exceeds 120 during heating, check for refrigerant leakage, the compressor temperature sensor, and the connecting tube are flattened.

The timing light flashes 2 times], the fault is that the current induced by the current sensor is too small, check that the current sensor is disconnected, and the sensor circuit.

The timing light flashes 1 time], the fault is caused by overheating, overcurrent, and short circuit of the power module, and the inspection range is that the power module, compressor, and outdoor unit are interfered with by high frequency.

It may be that the microcontroller reset is faulty at the moment of breakage.

Oaks Air Conditioner is a subsidiary of Oaks Group. Since its establishment in 1994, after 20 years of professional refrigeration history, it has grown into a leading brand in China's air conditioning industry, one of the top 500 Chinese enterprises, with three major industrial bases: Oaks Jiangshan International Industrial Park, Oaks Nanchang Industrial Park and Tianjin Wuqing Industrial Park, with an annual output of more than 10 million sets of air conditioners, sales of more than 10 billion and more than 10,000 employees.

Oaks Air Conditioning has 1 enterprise engineering technology center, 3 technical research institutes, 1 national postdoctoral workstation, and has strong air conditioning technology research and development capabilities and transformation capabilities. Since 2005, Oaks Air Conditioning has joined forces with international R&D institutions such as Samsung of South Korea and Panasonic of Japan to continuously improve the innovation and R&D strength of the enterprise in the eclectic exchange and cooperation, so as to ensure that the products are always at the leading level in the industry.

As long as the air conditioner is powered on first, and then use the remote control to adjust the air conditioner to the refrigeration state, keep this state with the remote control to align the air conditioner, press the damper button ten times, complete it in 8 seconds, and then hear the air conditioner ring eight times to solve this problem.

However, it is important to note that if you are not sure what is wrong with your air conditioner, it is best not to fix it yourself, because if you are not a professional, it is likely to cause more serious problems with your air conditioner. You can log on to the official website of the air conditioner or call the repair**, and ask the maintenance personnel of Oaks Electrical Appliances to provide door-to-door service.

1 Aim the remote control at the air conditioner, press the damper 10 times continuously, then the air conditioner buzzer rings several times in a row, and then the air conditioner is ready to use.

2 Add freon.

Reason 1: Outdoor phase loss or phase sequence protection (1) If there is a lack of outdoor phase or phase sequence protection, the timing light and running light will flash. (2) And the flickering frequency of the two lights is once a second, and there are many reasons for the lack of phase of the air conditioner!

Maintenance method: (1) It is usually due to a problem with the line, first check whether there is a problem with each line. (2) Then check whether the electrical wiring, compressor, etc. are faulty.

Reason 2: Damage to the outdoor coilIf the air conditioner is due to damage to the outdoor coil, then the timing indicator of the Oaks air conditioner will flash once per second. Repair Method:

Due to the damage of the outdoor coil, the air conditioner needs to be disassembled, so it is recommended to find a professional maintenance master. Reason 3: The indoor temperature sensor is damaged (1) If the timing indicator of your home Oaks air conditioner flashes, and the frequency is 8 seconds.

2) Then it should be caused by the failure of the internal temperature sensor. Maintenance method: Use the instrument to detect whether the indoor temperature sensor is damaged, and replace the temperature sensor if it is damaged.

Reason 4: Refrigeration and antifreeze protection (1) If the air conditioner's air conditioning running light and timing light flash at the same time, and the flashing frequency is once a second. (2) The air conditioner may automatically shut down because of anti-freeze protection, which appears in some models of Oaks air conditioners.

Maintenance method: (1) It is usually due to too many stains on the air conditioner filter, which causes the cold air of the internal unit to not blow into the room normally. (2) The temperature of the internal machine becomes very low, which will cause the internal machine to freeze.

3) Indoor antifreeze protection is to stop the compressor before the internal machine freezes high, so as to protect the compressor.

What is the fault of the Oaks ceiling machine timing light flashing 5 times, hello dear <><

Cause of failure: water full protection. Solution:

Check the water level switch and pump of the internal water pump. Phase sequence tour head, phase loss or system low-voltage failure, internal coil temperature control anti-freezing protection. The sensor is disconnected from the room or posture temperature sensor, whether the sensor is open, the coil sensor, the outdoor defrosting sensor, and check whether the three sensors are open and unobstructed.

The reason why the timing light of the Oaks air conditioner keeps flashing and how to deal with it:

1. Outdoor phase loss or phase sequence protection.

When this happens, both the timer light and the running light will flash, and both lights will flash once every second. There are also many reasons why air conditioners are out of phase.

Solution: Generally, it is caused by problems in the circuit, check whether there is a problem in each line, and check whether the electrical circuit and compressor are normal.

2. The outdoor coil is damaged.

This phenomenon in some Oaks air conditioners may also be caused by damage to the outdoor coil, if it is due to this reason, the air conditioner timing indicator will flash once per second.

Solution: If the outdoor coil of the air conditioner is broken, it is not recommended that the user replace it by himself, and it is best to ask the air conditioner professional to repair it.

3. The indoor temperature sensor is damaged.

If the timing indicator flashes in some models of Oaks, and the frequency is flashing once every 8 seconds, then it should be caused by the failure of the internal temperature sensor.

Solution: Use an instrument to detect whether the indoor temperature sensor is damaged, and replace the temperature sensor if it is damaged.

4. Refrigeration and antifreeze protection.

If the air conditioner's running light and timing light flash at the same time, and the frequency of flashing is once a second, the air conditioner may automatically shut down due to antifreeze protection. This phenomenon appears in some models of Oaks air conditioners.

Solution: The main reason for the air conditioning refrigeration anti-freezing protection is that the air conditioning filter is too dirty, which causes the cold air of the internal unit to be blown into the room normally, resulting in the temperature of the internal machine becoming very low, which will cause the internal machine to freeze, and the indoor anti-freezing protection is to stop the compressor before the internal machine freezes, so as to protect the compressor.

Oak lead Hongyusi air conditioner timing light flashing does not work Hello The reason why the timing light of the pro-Oaks air conditioner keeps flashing 1. Outdoor phase loss or phase sequence protection When this situation occurs, the timing light and the old running light will flash, and the flashing frequency of both lights is once a second. There are also many reasons why air conditioners are out of phase. Solution Generally, it is caused by problems in the line, check whether there is a problem with each Huai roller line, and check whether the electrical circuit and compressor are normal.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!