Trick 30, there are several ways to run and run

The route chosen for drifting is very important, and the other card that you run for 3 points is too slow. It is not very difficult to make a breakthrough, and it is impossible to make great progress all at once if you change it little by little. The key to this drift is practice makes perfect, as well as the timing of pressing shift, which all rely on one's own experience of groping little by little, which is a kind of conditioned reflex and cannot be taught.

Also, be careful not to hit the wall, and it doesn't matter if you slow down a little bit when cornering.

Lian Piao: Introduction: Lian Piao is to exert the drift skills to the limit.

You can use Lianpiao to pass through the large curves in the forest hairpin with a few small drifts, and you can quickly accumulate N2O, so that you can truly experience the joy of drifting! But there is a caveat!

Method:1It's still the same as before, press shift first to enter the normal first drift state.

2.Get on the right track! (Don't put scum on the wheel!) ）3.Press Shift to perform the first fire-breathing and start the second drift!

4.Get on the right track! (Don't let go either!) Tong Kai.

5.Shift for a second fire-breathing and a third drift!

In this way, the first Lian Piao is like filial piety! It should be noted that step 3 is separated from step 5 and shift about a second. It's no different from pressing together! Repeat 4 and 5 after the first fluave is completed....Keep repeating! You can do it even if you can!

Many friends report that they can't spray it like a master when they are drifting in a short range In fact, it's very simple, but it's a continuous spray first, and then a short-range drift and fire-breathing! ～～

Squirt with correct fingering.

1.↑→shift

The first drift.

Pull back the car. The steps must be fast!

3.→shift

The second drift.

The first time you breathe fire, you must press first and then press ).

5.→shift

The third drift.

The second time you breathe fire, you must press first and then press ).

(1) When a single drift is connected, it is called continuous drift (note: it is not a real continuous drift) 1 shift+ right drift).

2 Turn the head of the car).

3 (First Spitfire).

4 shift+ float).

5 (spray).

Cycle) 1, 2, 3 is a single drift process, and the cycle is continuous floating.

2) When the two floats are connected, they are called Lian Piao.

shift+ drift to the right).

(Turn the head of the car).

shift+ save once).

(U-turn) spray) shift+ loop).

3) And the better application in actual combat is a cutting drift (English name cutting drift).

shift+ →

shift+ ←

Tips: Regarding Lianpiao slipping, this is a problem that has just begun to practice Lianpiao, and the solution is to slow down the rhythm of Lianpiao a little to make the effect of the anti-key ( more sufficient.

The second kind of continuous drift is sometimes four or five in a row, and sometimes there is no one, what is the matter?

Here's my unique cheats (purely funny): When the go-kart pulls the body right after floating, the body axis must be pulled.

It forms between 45 and 70 degrees with the horizontal!! This is an absolute success!

45 degrees is suitable for too small C-bends, and the speed is generally fast. ★★

70 degrees is suitable for too large C-bend, U-bend, and the speed is very fast. ★★

Ease of Learning:

Success rate:

Speed: twice more than twice

Crashworthiness:

Track utilization:

Ease of Learning:

Success rate:

Speed: twice more than twice Pure caution

Crashworthiness:

Track utilization:

The noun "track utilization" explains:

This method of continuous drifting is not only used three or four times before it is called continuous floating.

The general bend is also only drifting twice, and the speed is not much reduced, but there is more gas of 15 30, how cool it is!

For example, town fingers: do you sometimes have 50% of the gas after the first bend, and after the second bend, the hidden agitation difference is 10% full of gas, and you are about to pass the third bend and can't float (afraid of bumping, and it is easy to lose the best bend angle to pass the next bend) is equivalent to wasting the gas earned by a bend, so as long as you learn to pass the second bend, then when you do the second bend, a small even drift (even drift twice), isn't there a gas.

It's just that even Piaobei can't understand.

[Optimization] to [Link Spraying].

Technical fingering. All of the following key fingerings, among them:"+"The number indicates the order of the keys, and there is none"+"indicates that it is pressed at the same time.

One. Optimize drift.

2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

The 1-3 step connection must be fast).

Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (two-button tap, the shorter the better) [Second Drift]4+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray. 1.+shift (Optimize Drift)2back direction).

3.+shift (two-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).

5.→+shift

Repeat 3 or 4 steps.

Finally, the continuous spray is the continuation of the double spray, the repetition of the double spray).

Four. Double spray.

1.+shift (Optimized Drift) [First Drift] 2back direction).

3.+shift (three-button tap, the shorter the better) [second drift]4+ Immediately return to the direction and breathe fire for the first time).

5.(Second Spitfire).

The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

Note: 1-3 steps"↑"It's always pressed.

Five. link spray.

1.+shift (optimized drift).

2.back direction).

3.+shift (three-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).

5.↑+shift

Repeat 3 or 4 steps.

Finally, Link spray is actually a continuation of Link double spray, to practice Link spray well, you must be very proficient in optimizing drift, double spray, continuous spray, link double spray