What type of tube can be used for 85T03GH instead?

Replacement model: AP85T03GH

Parameter: BVDSS: 30V

rds(on) :6mω

id : 75a

Package: TO-252

std75n3llh6

MOSFETs, N-CH, 30V, 75A, TO-252 can be replaced.

Function. 1.MOSFET.

Can be applied to magnification. Since the input impedance of the FET amplifier is high, the coupling capacitance.

It is possible to have a small capacitance and do not need to use electrolytic capacitors.

2.The high input impedance of MOSFETs is ideal for impedance transformation. It is often used for impedance conversion in the input stage of multistage amplifiers.

3.MOSFETs can be used as variable resistors.

4.MOSFETs can be conveniently used as a constant current source.

5.MOSFETs can be used as electronic switches.

Model: AP85T03GH

Description : N-Channel Enhancement Mode Power MOSFET

bvdss : 30v

rds(on) :6mω

id : 75a

Package: TO-252

STD75N3LLH6 MOSFET, N-CH, 30V, 75A, TO-252 can be replaced.

Or other models, as long as the parameters are close and the package is the same.

Go to 838 electronic query 85t03gh may be**, to be placed in the **column.

JCS630F is a field effect tube that can be replaced by IRF630.

JSC7N60 7A 600V For details, you can contact me to send it to you.

The MOSFET CS8N60 is replaced with a 10N60 tube.

MOSFET CS8N60 parameters: 8N60, 600V, RDS=ohm. 10N60 parameters: 10A, 600V, RDS=ohm.

FETs are referred to as FETs. There are two main types and metal-oxide semiconductor MOSFETs. Conducted by a majority of carriers, it is also known as a unipolar transistor.

It is a voltage-controlled semiconductor device. It has the advantages of high input resistance (107 1015), low noise, low power consumption, large dynamic range, easy integration, no secondary breakdown phenomenon, wide safe working area, etc., and has become a strong competitor of bipolar transistors and power transistors. A field effect transistor (FET) is a semiconductor device that uses the electric field effect of the control input loop to control the output loop current, and is named after it.

Because it conducts electricity only by the majority of the carriers in semiconductors, it is also known as a unipolar transistor.

K2606, also known as 2SK2606, is Toshiba's N-channel MOS MOSFET:

MOSFET N-CH 800V 8A On-Resistance (RDSON) Ohm

The replacement model can be further selected from the following models according to the parameters such as form factor, package, power and ** situation:

2sk787

2sk955，2sk956，2sk962

2sk1217

2sk1330a

2sk1342

2sk1358，2sk1363

2sk1462

2sk1464

2sk1465

2sk1489

2sk1512

2sk1539

2sk1775

2sk1934

2sk2078，2sk2320

2sk2393

2sk2611

You can only buy the same model, you can't use other models, that is, the model on the transistor, it's fine.

Take it to the repair shop and you can change it.

You don't understand anything, how can you fix it?

85U03GH parameters: N field 30V 75A

There is nothing that can be replaced, use the original model, and you can buy it after receiving it on **.

D1944 is a TO-220F package, VCEO=60V, VCBO=80V, IC=3A, PC=30W, FT=50MHz can be enabled for D1273 or D2092 to change pants for shirts.

C1944 parameters, can be replaced.