Whether hardened flooring and epoxy flooring can be reconstructed

It can be done. However, it depends on the cleanliness and aesthetics of the floor in your factory. If your plant only requires durability and smoothness, then it is completely OK after hardening and wear-resistant treatment.

In that case, if you make an epoxy floor, it will be a bit of a snake. First of all, if you waste money, the service life of the floor will also be reduced, because the hardened wear-resistant floor is exaggerated to say that it is a lifelong floor. However, if your plant is a GMP management standard, I still recommend that you do epoxy flooring, and then choose the type and thickness of epoxy flooring according to the utilization rate of your plant on the floor and the actual construction operation intensity on the floor.

Absolutely. Ordinary floor hardening treatment, just structural surface or foundation treatment.

In order for the plant to achieve a certain level of cleanliness and be more robust, it must be further treated.

It can be done, but it is necessary to pay attention to the ground, because after the construction of the wear-resistant ground, the hardness is very high, especially the Sika, Mestre wear-resistant floor, like the floor, the construction epoxy is easy to fall off and cannot be sticked. Epoxy is more difficult to penetrate, if it is a domestic floor, the hardness is not so high, if you feel that the construction is not good, you can use epoxy.

Sika flooring, Switzerland.

It can be done, according to the actual use needs, it can be done or not.

Huibang Horizon, ten years of quality, professional casting value.

Headquartered in Guangzhou, Guangdong Province, Huibang Land Flat China is a high-tech enterprise specializing in R&D, production and sales of corundum hardened wear-resistant floor materials, colored concrete flooring (art flooring) materials, concrete dustproof sealing curing agents, acrylic PU courts, and is a professional flooring and construction company with strong financial strength and technical strength as the backgroundIn recent years, the company focuses on the industrial floor market in Chinese mainland, the business development is rapid, has been in East China, Central China, and the Pearl River Delta region and product application area of millions of square meters, users have world-famous multinational groups to domestic factories, marketing network throughout the country, successively in Guangzhou, Hubei, Hunan, set up branches and material operation centers.

National unified service**: 4006 756 256

If you use a "lithium-based" liquid hardener, you don't need to make epoxy flooring, which is better than epoxy.

If you have a need, you can do it, and if you don't have a need, don't do it.

According to the requirements of the 2013 edition of the ground design code: concrete grade C25--C30, thickness 40-50, detailed 28 pages of table:

Construction conditions of epoxy flooring project.

1 Concrete floor requirements.

Curing period: For new cement floor or new terrazzo floor, it is required to cure for more than 28 days, and the moisture content is less than 8%.

Intensity: C-20 or above.

Moisture content: less than 8%.

Flatness: 2-3mm within 2m.

2 Climatic conditions.

When the relative humidity of the atmosphere is higher than 85% or the temperature is below 10, construction should be avoided. Or switch to other low-temperature and moisture-resistant products.

3 Site Preparation.

All debris needs to be removed from the construction site, and it is best to avoid cross construction and prohibit unrelated personnel from entering and exiting.

There should be no stagnant water or oil on the ground, and it should be kept dry and clean.

4.Ground treatment work and dust and pollution prevention measures before epoxy floor construction.

Ground treatment. Before the epoxy floor is constructed, the original ground needs to be treated.

1) Use a grinding machine to polish the whole to remove the cement slurry or other adhesions on the surface, and polish the surface roughly.

2) Use a vacuum cleaner to fully vacuum and clean.

3) The edge is artificially haired.

4) Surface cleaning and repair.

l Check the ground, if there are oil stains, use degreasing and cleaning with detergent; If there is a locally damp floor, it needs to be dried.

l For cracks and small pits, etc., use resin mortar to fill in advance.

l For expansion joints, cut into grooves with a cutting machine, and then flattened with flexible epoxy mortar.

Dust and dirt protection measures.

1) For precision machinery and equipment, cover with PVC film to prevent dust.

2) Stick the bottom edge of the wall, door and window with tape paper to prevent it from being stained with paint, and tear it off after construction.

Now, the attention to the floor can be great, many people have higher and higher requirements for the floor, nothing more than the hope of beauty, good performance, from the past to the present, the evolution of the floor is also very large, there are solid wood flooring, stone plastic flooring, cement flooring, tile flooring, composite flooring, oak flooring and epoxy flooring and many other floors with their own advantages and disadvantages. In today's modern era, epoxy flooring is a more popular floor, so there must be a lot of epoxy flooring that is not very well understood, so next, let's take a look at what epoxy flooring is!

What is epoxy flooring

Epoxy floor is a very beautiful floor, it has high strength, wear resistance, no joints, solid texture, waterproof, anti-corrosion and dustproof, construction and maintenance is not only convenient and cheap, with many advantages of epoxy flooring is therefore deeply loved by the masses.

Classification of epoxy flooring

Epoxy flooring can be divided into four main categories:

1.Epoxy flat coating flooring: mainly used in places where the environmental requirements are not very high, such as: ordinary workshop.

2.Epoxy self-leveling flooring: mainly used in industrial fields with high environmental requirements, such as: plant purification, dust-free workshop, etc.

3.Epoxy anti-static flooring: mainly used in some electronic production fields that require antistatic.

4.Epoxy mortar wear-resistant flooring: mainly used in some heavy-duty areas in the factory, such as workshops, underground parking lots, warehouses, passages, etc.

Construction of epoxy flooring and precautions

Generally, epoxy floor construction has to go through these steps: base surface treatment, painting sealing primer, batch scraping putty, sanding and vacuuming, painting color paint, filling treatment, batch scraping of the middle layer, epoxy resin topcoat, engineering maintenance, etc.

1.Epoxy flooring can not be used immediately after the completion of construction, and should be put into use after 7-10 days of curing.

2.When cleaning the floor, use a soft mop or wet and dry vacuum cleaner.

3.If the epoxy floor is damaged or scratched, it can be repaired locally if it is a small area, and it is best to repaint it if it is a large area.

4.Ground waxing can be carried out according to the actual situation to prevent scratches on the ground.

5.The construction environment should be excellent to avoid dust particles in the air from penetrating into the epoxy floor that has not yet dried completely.

6.Try not to smash some hard, sharp tools on the floor, otherwise it is easy to damage the floor.

Application of epoxy flooring

Because of the many excellent characteristics of epoxy flooring, it is widely used in various fields, such as: electronics factories, automobile factories, pharmaceutical factories, hospitals, laboratories, aerospace bases, textile factories, parking lots, plastic processing plants, candy factories, tobacco factories, etc.

So far, epoxy flooring has been accepted and used by many domestic manufacturers, so we can't help the future development of epoxy flooring, but many people believe that the trend of epoxy flooring will get better and better, so let's wait and see!

You can get it for free

Dear, I am happy to answer for you: Can you do a rigid floor on an epoxy floorAnswer: Kiss, you can do a rigid floor on an epoxy floor.

Epoxy flooring is a kind of high-strength, wear-resistant, beautiful rigid flooring, which has the advantages of no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, convenient maintenance, and low maintenance costs. Rigid floor generally refers to the concrete surface layer (including the asphalt concrete used in the road), the slate surface layer, the hard material floor panel of the ground is a rigid ground, the structural design angle: the ground of the center of the house can be treated as a rigid ground, because the structure is generally to strengthen the column root area, and the rammed soil in the area around one end of the column also has a considerable constraint on the deformation of the column.

Summary. To make epoxy floor paint, you need to use dust-free grinders, scrapers, trowels, rollers, masking paper, tape measures, quartz sand, quartz powder, thinner materials, etc.

To make epoxy floor paint, you need to use dust-free grinders, scrapers, trowels, rollers, masking paper, tape measures, quartz sand, quartz powder, thinner materials, etc.

Do a good job in epoxy floor engineering, nothing more than materials and construction messy Lu Jian, materials, raw material resin is 128 liquid resin, the content is more than 60%, there is a curing agent, there are good and bad on the market, and finally ask more; The second is construction, as the saying goes, three points of material and seven points of construction, the construction accounts for a large amount, why do you say so, one is the construction technology, the other is the amount of construction; Good construction technology can deal with different problems on the ground, and avoid the problem of peeling and bulging and shortening the service life in the future; During the construction process, the amount can not be reached will also shorten the service life, so many users only ask about the low**, the same process, some are high and some are low, ** is not indiscriminately reported, the materials used are not the same, the amount is not the same, the two knives on the market are low, and the quality of the floor is very poor, and the skin is bulging in less than half a year, and the wear resistance is very poor. Each square meter of epoxy floor is designed according to the actual ground conditions, and then the analysis table is made.

Sincerely for slipping which you answer every question is the best if you are satisfied. Your praise is the driving force for us to move forward, looking forward to getting your letter buried in the code like, is it okay? Have a great day and see you soon! Liquid macros.

Summary. Hello dear, if the surface is raised, cut off with a utility knife, or smoothed with a sandpaper machine;Excision or smoothing out of other surface depressions, filling and flattening a scraper or trowel.

1.If the drop is greater than 5mm and the flatness of the concrete base is more than 5mm, the cost of leveling with a grinder or sand scraping with epoxy resin will be huge, and the thickness of the sand layer is too high will have a certain impact on the performance of the floor paint. At this time, it is better to reconstruct the 3-5cm cement mortar layer on the concrete base surface with a drop of more than 5mm, re-collect the original slurry, and level better.

2.The drop difference is less than 5mm grinding. Use a grinder or scrubbing grinder to configure the diamond grinding head for base grinding, grinding the high point to parallel to the low point.

Hello dear, if the surface is raised, cut off with a utility knife, or smoothed with a sandpaper machine;Excision or smoothing out of other surface depressions, filling and flattening a scraper or trowel. 1.

If the drop is greater than 5mm and the flatness of the concrete base is more than 5mm, the cost of leveling with a grinder or sand scraping with epoxy resin will be huge, and the thickness of the sand layer is too high will have a certain impact on the performance of the floor paint. At this time, it is better to reconstruct the 3-5cm cement mortar layer on the concrete base surface with a drop of more than 5mm, re-collect the original slurry, and level better. 2.

The drop difference is less than 5mm grinding. Use a grinder or scrubbing grinder to configure the diamond grinding head for base grinding, grinding the high point to parallel to the low point.

Hello. The floor is painted with topcoat, and some places are found to be uneven, how to deal with it.

Hello, the surface protrusions, cut off with a utility knife, or smoothed with a sandpaper machine;Excision or smoothing out of other surface depressions, filling and flattening a scraper or trowel.

There is no material treatment that is oily.

The main thing is what material to use, so as not to not layer later.

Hello dear, you can use raw materials directly, and you can generally use it for decades.

Raw materials plus no other materials.

Hello dear, you don't need to add, it's easy to have problems if you add it.

If you don't add it, how can you fill it up?

Hello dear, just add the raw materials directly, and put it full.

How did it before, follow that step.