How to solve CAD text modification, how to modify CAD text

Friends upstairs, I understand what the landlord meant.

The landlord said that he wanted to modify some of the text in the drawing, but when he modified it with a command, he could only change the text content, not the format of the text.

The explanation is as follows: there are two ways to input text: single-line input and multi-line input, both of which can be modified with a command (the one specially used to change the text, a plus a pencil head) to modify, multi-line text is easier to modify, not only can change the text content, but also can change the format of the text.

Single-line text is not good, you can only change the text content and cannot adjust the format (such as text size). The landlord can try to change it in the text attributes.

Select the Chinese character, click the "Object Properties" icon in the toolbar at the top of the screen, and the properties used in the text will appear in the upper left corner of the screen, just change them in the properties. Usually we change the ratio of the height of the text to the width of the text.

If the landlord wants to change the font of the text (for example, if you want to change the font to bold), the landlord needs to set the text format in advance, and the default font font is only annotated.

Alas, the picture above. It feels like the landlord is a newbie. **It's a little smaller. I'm tired to death. Rarely such a detailed question.

As soon as you click on the text to display a part, you can press the left or right arrow keys to display and modify it.

You can also double-click the font you want to modify it.

Double-click the text to modify it, and click to confirm after the modification.

1. Open the CAD software, find the text in the drawing bar, the first and the first as shown in the figure, there are single lines of text and multiple lines of text. Or you can use the shortcut keys to execute it directly: dt is a single line of text, MT is a multi-line text.

2 is a single line of text: 1, the chain is entering dt, enter. 2. Specify the starting point of the text. 3. Specify the height of the text. 4. Specify the rotation angle of the text, and then press Enter. 5. Enter the text and finish.

The height and angle can also be adjusted in the back.

3 Then there is the multi-line text mt:

1. Enter MT and press Enter.

2. Specify the first point.

3. Specify the diagonal point (the straight one can pull out this rectangle).

4. Enter text (line breaks are allowed).

5. Click "OK" to finish.

3. After opening the corresponding CAD document, the background color of the CAD document may be modified according to your own personal needs

4. In the CAD viewer tab interface, through the relevant tools in the "Location" column, you can realize the comprehensive adaptation of the CAD document.

5. For the modification method of Chinese characters in CAD documents, you can switch to the "Tool" tab, click the "Capture" tool, and then double-click the corresponding text to make the state.

6. If you want to add text content to the CAD document, you can click the "Single Line Text" or "Multiple Line Text" tool in the "Text" list.

Hello, for text modification, you can generally double-click the text directly to repair the potato and touch it, and click OK after the modification;

For the text that has been established, it is necessary to decompose the hand-mess (shortcut key x) and then modify it, that is, the file can be;

Summary. There are many reasons why the text cannot be modified.

There are many reasons why the text cannot be modified.

I'm sorry I don't understand, but can you elaborate on that?

In CAD, it is possible to modify the existing text or text imitation objects, including modifying the content, font, size, color, position, etc. of the text. If you are unable to modify the existing text, there may be several reasons:1

The text is locked or set to read-only. In CAD, you can lock text objects or make them read-only so that they can't be modified. If you want to change this text, you need to unlock it or deactivate the read-only attribute first.

2.The type object is placed on a locked layer. If the layer on which the text object is located is locked, you can't change it.

In this case, you'll need to unlock the layer before you can edit it. 3.The text object is converted to a block.

In CAD, you can convert text objects to blocks so that they can't be modified individually. If you need to make changes to these words, you'll need to remove them from the block before you make them. 4.

The text object is corrupted or has an error. In some cases, text objects may become corrupted or incorrect, making it impossible to modify them. In this case, you'll need to fix or recreate the text object before you modify it.

In summary, if you can't modify an existing text object, you need to check the layer the text object is on, the locked state, whether it has been converted to a block, and whether there are any errors.

Material Tools: CAD

1. First of all, we open the CAD, open the drawing file we need to make, enter the CAD drawing drawing page, and adjust the drawing to the appropriate position.

2. Then we click on the option in the CAD window, and click on the search option in the pop-up menu, and the search window can pop up, and we can specify the search for the drawing in the window.

3. In the Find Object option, enter the text content we need to find in the drawing, and then you can directly search and find the corresponding object.

4. After entering the content we need to find in the search option, we can enter the content we need to replace the text in the replacement input field.

5. After completing the content of finding and replace, we can directly click on all to replace the text, and a system prompt will pop up after the replacement, prompting us to complete the replacement.

6. After completing the replacement, we can find the corresponding text content in the drawing, and we can see that the text content in the drawing has been replaced with the specified replacement content.

The first step is to determine the type of text. Click the cursor on the text you want to modify, click the left button to select the Chinese character, then you can see what type is displayed on the property:

Writing. <>

Multi-line text box.

If the dot property is displayed on the text is "Block Reference":

Block references. <>

Text in blocks.

You can change all the font size and font style in CAD at once by changing the text style, and the specific method steps are as follows:

1. First open a CAD document, and then find the "Formatting" toolbar in the menu bar above:

2. Click to open the text style dialog box in the format, as shown in the following figure by default:

3. In the dialog box, set the font style and font height to the one that needs to be in the sky, and then click "Set as Current" on the right

4. Select "Yes" in the pop-up dialog box to change all the fonts to the required "Songti:".

Through the above method, you can change the text in the CAD at one time.

A: 1Select the text style After entering the CAD software, click on the command box, enter the command ST and press Enter, or you can select the text style after the grid type.

2.Select Text Style After entering the Text Style menu, return to Dissipate, select Text Style on the left, and find the font option on the right.

3.Select Font Style Drop-down the font name option, select the bridge and select the desired font style, and you can preview the font style in the lower left corner.