How to create a text style in CAD, how to set a CAD text style

We use [CAD] to effectively speed up our work progress and improve our work efficiency, because [CAD] can quickly mark each item.

This type of size makes it easy to write the text you want to describe anywhere in the drawing window.

How to style text in CAD?

If you are working in engineering, it will be much easier for us to use [CAD] to set up text, if you don't have the skills.

Then it's very difficult, I've been using [CAD] software myself, and I'll talk about my experience with text settings.

How to style text in CAD?

Clause. First, we must pay attention to the version of this software when we want to use [CAD], I recommend that you at least use the version after 2010.

In this way, the functions are more comprehensive, and it is much more convenient to use, otherwise many functions cannot.

How to style text in CAD?

Click on the text style setting dialog box to enter the text style setting, and then start setting the text.

How to style text in CAD?

Clause. Third, when we use it, in order to facilitate the distinction of different color values, we need to create a new style name of your favorite font.

Line difference, [CAD] latest version, can also be set in Chinese, these are suitable for their own use.

How to style text in CAD?

Clause. Fourth, then we click out of the [Preview] window, choose your favorite font, there are a lot of choices, you can.

In order to find your own suitable font, now you can click [Apply] so that you can use it, in fact, this setting is very simple, just a lot.

People don't notice.

How to style text in CAD?

It should be added that at present, there is a new version of the [CAD] software, and this new version can directly carry out the above series of changes, as a whole.

The following describes how to set the CAD text styleTools Ingredients: desktop computer, Windows 7 64-bit, CAD 2020 <>

1. Open the CAD software, click on the text style under the comment, or use the command style, so as to open the text style setting interface:

Text style. 2. In the text style setting interface, set the style name, text type, effect, width ratio, etc

Style the text.

You can set up a number of different text styles and set them according to your needs.

3. Use the text style, you can switch the current text style when drawing:

The type style currently in use.

Tips: You can create a new blank drawing first, then set the text style, and finally save it as a dwt template file, and then use this template file to create a new drawing, so that each new drawing has already set the text style.

The steps to modify the style of text in CAD are as follows:

1. If you are carrying out engineering work, it will be much more convenient to use [CAD] to set the text.

2. When using [CAD], you must pay attention to the version of this software, and use the version after 2010, so that the functions are more comprehensive, and it is also much more convenient to use, otherwise many functions cannot be used.

3. After the new version of [CAD], you can install it, after the installation is completed, you can click from the bottom of the menu bar [Format] to enter the dialog box for the style setting of the Wen Qi Hungry Huai character, and then start to set the text.

4. When using, in order to facilitate the distinction of different limb color values, it is necessary to create a new style name of the self-vibrillating friend's favorite text to distinguish it.

5. Then you can choose your favorite font according to the [Preview] window we clicked out, there are many choices in it, and you can find your own suitable font.

There are one or two default text styles in the CAD template, but the default text styles are usually not sufficient. It is easy for beginners to ignore the setting of the text style, or simply modify the font of the default text style and use it directly. If everyone is using these default text styles, the definitions are different in different sheets, and the text changes when copying and pasting sheets or xrefs.

Therefore, before drawing a picture, we must plan how many fonts we need to use in the image, and then set the text style. Enter ST in the command line and press Enter to open the text style dialog box, as shown in the following figure.

There is only one default text style in CAD: standard.

"Current style name", which is the default text style used when writing text, the default current style name is the standard text style settings in each version are also different, and some use the built-in font in CAD (*.txt), some use the arial font of the operating system. Even if there is no font requirement, standard may not necessarily meet our needs, so it is recommended to create your own text style when drawing.

Here's how to create a text style that uses operating system fonts.

1. Click the "New" button, enter the name of the text style in the pop-up new text style dialog box, preferably the same name as the font to be used or related to the purpose, such as marking fonts, etc., so that we can more easily distinguish which text style should be used when using the text style.

The font of the operating system is relatively simple to use, just select a font, and after selecting the font, other settings are similar to other software such as word.

2. Select Song style in the font drop-down list, and other parameters can be ignored temporarily, so that the text style can be defined.

The advantage of using the font of the operating system is that there are fewer cases where the font cannot be found when different CAD is opened, but the Chinese XP system and the system above Win7 are not completely consistent, and sometimes the font cannot be found when opening the drawing on the higher version of the operating system.

The following describes how to set the CAD text styleTools Ingredients: Desktop computer scrambler, Windows 7 64-bit, CAD 2020 <>

Haochen CAD Chinese character style modification operation steps:

First of all, open Haochen CAD software, and then enter the shortcut key command in the command line: ST or style, press the enter key to confirm, and you can bring up the [Text Style] dialog box. As shown in the figure below:

In the [Text Style] dialog box, select the CAD text style you want to modify, then set the font style, text size, font effect, etc. as needed, and click Apply after the setting is complete.

How to style text in CAD? In our daily life, we use software CAD how to set the text style, and how to operate it, today share the method, let's learn together!

1First of all, we open the CAD software and click the "Format" button at the top to enter.

2. Pop up the text style menu bar, you can modify the font name, font style, font size, font height and font effect.

3After the modification is completed, click "Apply" below.

4. Finally, click "Close".

Hello in the use of CAD drawing, before annotating text, you should first set the text style. Text style is to carry out certain processing of a certain text font, such as making the text bold, changing the font size, inverting and so on. The steps to style the text are as follows:

Tools Materials.

CAD software.

How it works: 01 Double-click the CAD shortcut icon on the desktop, open the CAD software, enter the CAD operation interface, 02 After opening the software, find the "Format" option in the toolbar at the top of the drawing interface, click Open, and find the "Text Style" option in its submenu bar.

03Click the left mouse button to open the "Text Style" option, and the system will automatically pop up the "Text Style" dialog box as shown in the figure below, in which you can set the text style:

04Click the "New" button next to the "Style Name" drop-down menu, the system will automatically pop up the "New Text Style" dialog box as shown in the following figure, enter the text style name in the text box, here "Mechanical" as an example, and then click the "OK" button to return to the "Text Style" dialog box

05Then return to the "Text Style" interface, find the desired "Text Font" in it, and select a suitable "Font Style" next to it, 06 Enter the height of the desired text in the "Font" field. If you do not enter the system default height, it means that every time you enter text using this text style in the future, the system will prompt you to enter the text height.

07Finally, set the display effect of the text. Select "Upside Down" in the "Effect" column to indicate that the text is written in the normal upside-down way, "Reverse" means that the text is written in the normal reverse way, and "Vertical" means that the text is written in the normal way vertically. Generally, there is no need to choose.

08 After these parameters of the text style are set. Then click the "Apply" button next to it, which means that the text style has been set to the current text style. Then click the Close button to complete the text style operation.

Why learn CAD? CAD is a software used for two-dimensional drawing, detailed drawing, design documents and basic three-dimensional design, which is very powerful and widely used in all walks of life, such as civil engineering, decoration, urban planning, garden design, electronic circuits, mechanical design, clothing, shoes and hats, aerospace, light industry and chemical industry, etc. Multiplier.

CAD tutorial on how to create text styles.

1.Open the CAD drawing software and click the [Shizhi Text Style] control.

2.When you create a new font scatter box, first give it a name, and then select a font name and font style. The specific selection order is as follows:

The above is the sharing process of "CAD Creating Text Style Operation Tutorial", I hope this tutorial can help you, no, there are more article tutorials, you can also click this link to learn more CAD tutorials: