-
Anonymous users2024-02-10Restart: Press and hold the F8 key, when the boot menu appears, select the last correct configuration, and press enter to try. If not, you can choose the safe mode again, enter the antivirus, 360 guard scanning, process it, and restart it. If not, reinstall the system.
-
Anonymous users2024-02-09What have you updated the system, can you explain it clearly?
-
Anonymous users2024-02-08What happens when the computer can't turn on after updating the system, 1. Disconnect the network. Unplug the network cable if it is wired, and disconnect the wireless network if it is wireless, so as to ensure that the computer is not in a network state. The purpose of this is to ensure that the system is not automatically connected to the Internet for upgrades when it is turned on.
2. If it is a desktop, it is recommended to open the chassis and pull out the lithium battery on the motherboard. You can also try to ignore this step. (The notebook doesn't have this, so it's not needed) of course this step may not be needed.
The reason is because the battery is to store some information after the computer is turned off, which may be related to the problem. 3. Restart the computer, press and hold F8, select "Safe Mode" Enter (of course, this step may not be needed, you can log in directly to Windows to try to see), the interface will also appear "Configure Windows Update failed, restore the update, do not shut down", wait for a while, it will automatically shut down later, the computer will automatically restart to enter Windows login, and "Configure Windows Update Update 35%, of course, this value may be different, Wait a while and you will be able to enter the system smoothly. 4. In order to ensure that such situations do not occur again in the future.
Open the Control Panel, go to "System Security", click on "Windows Update", click on "Change Settings" on the left side, then select "Never check for updates", and finally click on the "OK" button. Reboot, no longer "Configure windows update failed, restore update, do not shut down", the problem is solved. Hope it helps.
-
Anonymous users2024-02-07Summary. Hello! The reason why the computer can't turn on after updating the system is because you need to wait for the system update to be completed before you can enter the system.
What happens if the computer can't turn on after updating the system.
Hello! The reason why the computer can't turn on after updating the system is because you need to wait for the system update to be completed before you can enter the system.
1. If the system update causes the machine to freeze, or the waiting time is more than half an hour, then you can do the following: 3. Restart the computer, and press the F8 key as soon as it starts. 4. Select Enter Safe Mode, and wait for the update in the state of entering Safe Mode without getting stuck.
5. Wait for no more than half an hour, and then it will enter safe mode, as long as you restart the computer again, you can enter the system normally. 6. If it doesn't work, then you can reinstall the system to solve it completely.
There are many cases where the system cannot be turned on, and generally speaking, there are probably several hardware reasons that cause the system to fail to boot. >>>More
It may be that your home computer has been used for too long, and the power supply pipe has burst. Find someone to fix it, but if you can't fix it, you can only change the host, so that's the only way.
There is an 80% chance that the CPU is hanging (the possibility of the board hanging at the same time cannot be ruled out). >>>More
1. It may be that the battery of the computer is exhausted, so when the computer is turned on, the computer will not respond, just connect the charging cable. >>>More
Well, the system is broken, reinstall it.
It's not that you can't read the disk (unless your optical drive is also broken). >>>More