The all in one computer has no response at all? 70

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Where is the water coming in? Keyboard? Maybe you haven't entered the interior and shut it down quickly, so use a hair dryer to blow it for a longer time.

2 Natural drying is the best way to get your phone back. Never use a hair dryer to quickly dry the moisture in your phone. All-in-one electricity.

The pool is built-in, and the heat fraction of the hair dryer may age the battery and cause the phone to malfunction.

3 After drying the water, put the phone in a box with ** desiccant and let it dry for 4 to 5 days. If there is no dedicated dry.

In the case of drying agents, you can also use dehumidifiers for closets, such as food desiccant that comes with food packaging, rice, or binchotan charcoal.

line instead. The drying time varies depending on the degree of flooding and the change of seasons, but it takes roughly 2 to 5 days.

How to deal with the screen failure caused by water ingress, you can operate it in the following ways: 1. Use a hair dryer to blow it. After the mobile phone is in water, no matter what kind of water the mobile phone falls into, the battery should be removed directly from the first time and between!

Remember not to press any keys, never try to turn on the phone, but keep the phone out of the water, and use undusty napkins, cotton balls, cotton swabs, etc. to absorb all the water that can be wiped off. 2. Then use a hair dryer wheel stool to dry it as soon as possible. After the surface is dry, continue to blow along the gap or jack of the mobile phone to ensure that the dry position is completely done.

3. Dry with electric heater. If the problem cannot be solved after using a hair dryer, then it is necessary to use an electric heating treasure. Users need to prepare two dry towels with good water absorption, wrap the phone in towels, and wrap at least three layers.

Then use an electric heating treasure to dry, so that all the water hidden in the mobile phone will seep out, and the problem of water and screen failure of the mobile phone can be solved. Extended dataDaily maintenance of the touch screen method: 1. Wipe the screen with a dry cloth every day before turning on the machine.

2. Water droplets or drinking tung bulk material fall on the screen, which will make the software stop reacting, which is due to the similar characteristics of water droplets and fingers, and the water droplets need to be wiped off. 3. The touch screen controller can automatically judge the dust, but too much dust will reduce the sensitivity of the touch screen, just wipe the screen clean with a dry cloth. 4. Use glass cleaner to clean dirty fingerprints and oil stains on the touch screen.

Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Solution: 1. Pour out the liquid inside the headphone jack and charging port of the mobile phone with the headphone jack and charging port facing down.

2. At this time, if conditions permit, you can send the mobile phone to a nearby after-sales point or other repair shop for disassembly, and then air dry the internal water vapor after the power is off.

3. If there is no maintenance point nearby, you can only leave the headphone jack facing down for a period of time, and automatically shut down when the mobile phone is exhausted, and then send it to the after-sales point of the mobile phone in time to disassemble the machine and dry the water vapor.

4. If the mobile phone is seriously flooded, and the battery, internal circuit or motherboard chip and other parts are damaged, the after-sales technician needs to determine the fault point through detection, and repair or replace the faulty parts accordingly.

Don't turn it on and wipe it the next day to find after-sales.

Wipe the remaining water on the outside of the phone with a paper first, and then turn the phone over; That is, the state of flip mute that is often used by Android phones.

Place the phone screen down horizontally to minimize water flow to the motherboard. Then use a hair dryer to dry the water.

It is worth noting that you must not use hot air to blow directly to the screen, which will also cause damage to the LCD screen, or use low and medium low temperature air to dry it as much as possible. If you are strong enough, you should still take off your phone first, so that the chances of recovering your phone will be greater.

You'll also need to wipe down the circuit board with anhydrous alcohol and all the other before trying to turn it on. Of course, the premise is that you can disassemble the phone by yourself, or in that sentence, your hands-on ability is strong enough, or you are very experienced in disassembling all-in-one computers.

The principle is that the rapid evaporation of alcohol is used, and the water on the circuit board can be volatilized together, so as to achieve twice the result with half the effort. Of course, the last step is to send it to a professional repair center for repair as soon as possible, because it will cause serious corrosion of the motherboard after a long time.

Note: When the mobile phone gets into the water, people's conditioned reflex is to immediately test whether it can be turned on, and this can only be counterproductive, causing the motherboard to be directly short-circuited and burned. Especially for all-in-one mobile phones, we should pay more attention to this, because their batteries are non-replaceable, once the water enters, the boot will cause the motherboard to burn, and your love phone will also be scrapped because of your impatience. Therefore, it is emphasized here that when the mobile phone gets into the water, you must control your curiosity, and don't try to turn it on with luck.

Hello don't panic, we divide the situation into 3 types:

1. Drop into clean water when the power is on;

2. In the case of power failure, it falls into non-corrosive liquid;

3. Fall into non-clean water when energized, or corrosive liquid or viscous liquid or other unclean liquid regardless of whether it is energized or not.

Let me give you some of my personal advice for each situation:

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.