How to limit your internet speed! Urgent! Urgent! Urgent!

2.Using the following P2P terminators, this software can control the flow rate of each port, and of course, there are now more anti-P2P software. It's just that if you want to limit your own internet speed, I don't think anyone will want to do it against you.

3.Buying a router with QoS function can also easily implement the rate limiting function.

Upstairs, even if your method is feasible, it's troublesome, limiting your own Internet speed, and not limiting other people's Internet speed, why do you make it so troublesome? Tell you the easiest way to do it: this method doesn't use software for real DIY:

Open the Run Input" Enter, open Group Policy, open the management template under the computer configuration in turn - Network - QoS Packet Plan in the right window to find the limit can reserve bandwidth double-click, select Enabled, in the following bandwidth limit you can increase or decrease the limit percentage, the default is the limit of 20%!

If it's useful, give it to me!! Hehe! Thank you!!

The next P2P terminator, you negotiate Ha, you turn off the firewall, let him open P2P to limit your speed, you 2m, the average score shouts that he limits your speed to 120k! ~·

3. All of them cannot directly limit the speed of the web page, and the speed of the web page can be limited by limiting the speed of the browser;

Limit browser speed method:

1.Click on the 360 acceleration ball, then click on the Internet speed, click on Internet management, and turn on the 360 traffic firewall;

Run Go to Group Policy -- Management Templates -- Network --- QoS Packet Planner Double-click -- Go to [Limit Reservable Bandwidth] to set it.

Support the first floor, the 360 speed limit is really good.

Use the advanced tools in 360 and the Traffic Monitor to set the speed at which you can open the web page.

Open** Requires restricting port traffic.

Resolution.

1. Take the Tenda router as an example.

2. Open the browser, enter ** Enter the password to log in.

3. Click "Bandwidth Control" in the menu bar

4. Tick the box in the "Enable" column.

5. Set the rules and fill in the rules. Generally, it is enough to ensure that you have the Internet speed, so you can set it for your own IP.

6. Enter ipconfig and press enter.

IPv4 is our address.

7. At this time, go back to the settings and fill in the IP just now.

The bandwidth range should be set according to the network speed, for example, if it is a network speed of 2M, the range that can be set is 0 to 256

Here set 50 100

The router has a speed limiting function This really doesn't know if the landlord wants to limit the speed It is recommended not to use the router and use the switch instead ** It is not high The speed limit function is significant ...

The most expensive route, don't scare me, just two computers and you buy a router for hundreds of thousands???

What do you want to do, landlord? Even if I knew about software like Jusheng webmaster, P2P terminator, network executive, network scissorhands, etc.

I won't tell you.,It's because of people like the landlord.,I'm being attacked by ARP every moment in the LAN.。。。

Don't do bad things.

1. If the router is in your place, if you happen to be using a TP-Link multi-function router, you can log in to the router and set it in the IP bandwidth control book.

2. If the router is not there for you and the default password is not repaired, or you can get the router account name and password, then you can also use the above method to restrict.

3. If you use a router that is not multi-functional, it will be the same if you are not there. Then you have to use P2P software to restrict. However, the current ARP fireproof wall is also very powerful, depending on your luck, if you meet a master, these are useless.

In the router settings, enable MAC address filtering, add the MAC address of your computer, laptop, tablet, and mobile phone, and the filtering option is only allow access to the added MAC address.

2. If you want to limit the speed of a single machine, it should be unnecessary, if necessary, you need to use special network management software.

3. If you want to limit the speed of each computer after networking, then you can set it with the help of the configuration page of the router used for networking (refer to the configuration manual of your router).