How much coolant do you need for a Toyota Camry?

1. Find the container that shows the amount of antifreeze Cerachart shows whether the antifreeze capacity is lost is a vertical straight pipe, which we are used to calling the auxiliary water tank, which is located between the engine and the front bumper. Open the bonnet and look to the left side of the front bumper, where a long pipe with pink liquid is erected to check whether the antifreeze is running out, the auxiliary tank, and the right side of the bottom is where the tank is located. 2. Judge whether the antifreeze is in deficit to see whether the antifreeze is in deficit, generally to ensure that the engine reaches normal temperature and is in the idle state, at this time, the amount of antifreeze in the auxiliary water tank should be between the highest point "F" and the low point "L", if its liquid level is about to be lower than the "L" line, it is the amount of antifreeze loss, and the antifreeze should be replenished to the "F" position in time.

For the Elantra, the capacity of the displacement antifreeze is 6L, so the owners can add it as much as they want.

Hello, this one takes about 4l or so I hope my answer can be helpful to you, please set it to, thank you!

Hello, about 6L. Have a great trip. If I can help you, please set it to, thank you!

Camry changes the water tank treasure to 6L. The Camry's water tank is located in the following areas: open the engine compartment, and under the gantry is the main water tank, on which there are sails equipped with fans to dissipate heat.

There is a black hose connected to the auxiliary kettle, from which you can generally observe whether the engine coolant is sufficient, and there is a scale indicating the upper and lower limits, and the Camry is pink coolant.

Here's how to change the antifreeze:

1. First of all, park the vehicle for a period of time to prevent being scalded by antifreeze. The drain screw of the antifreeze is at the bottom of the water tank, find and loosen it, and see that the drain no longer flows out of the antifreeze;

2. Hang the vehicle to run in neutral gear, and pour clean water into the storage tank of antifreeze at the same time, the principle is to let the water rinse the original antifreeze until you see that the discharged water has no color, and the old Zhixian hail antifreeze is basically cleared at this time;

3. After the water is discharged, the water drain valve can be installed and the vehicle engine can be turned off. Fill the filling port with a new antifreeze, keep the liquid level between max and min, if you accidentally add more search, it doesn't matter;

4. Fire the engine again, because in the idle working state, the pipeline air in the cooling system is further discharged, so that the antifreeze liquid level is lowered by a certain height;

5. Wait for a few minutes, wait for the level of antifreeze to no longer move, add antifreeze again between the two scale marks, and the replacement of antifreeze will be completed.

The first time the coolant of the Toyota Camry was replaced at 160,000 km, followed by 80,000 km. Camry coolant replacement: fill up the kettle and start the car until the water temperature is normal, and the electric fan starts to work, and then check the coolant in the kettle.

If it's missing, add some coolant and check it a few times in the next few days.

The full name of antifreeze should be called antifreeze coolant, which means that there is antifreeze coolant, antifreeze can prevent the coolant from freezing and bursting the radiator and freezing the engine cylinder block when parking in the cold season, but we are noisy to correct a misunderstanding, antifreeze is not only a good winter to talk about, the normal maintenance project of the car, every year of driving, the engine antifreeze needs to be replaced, and the frequency of special vehicle antifreeze replacement is high.

With the improvement of engine structure and the progress of material technology, compared with the old engine, a significant feature of modern automobile engine is that the operating temperature of modern engine is high, and the upper limit of normal operating temperature is generally more than 100. Taking domestic cars as an example, the normal working temperature of the engine is: Shanghai Santana 90 105, FAW Jetta 85 115, Fukang 90 118.

If all the water is filled, when the engine temperature reaches 100, the water will boil and "boil", in addition, the water is corrosive, which will produce scale and affect the cooling effect. Therefore, a special cooling medium is used: antifreeze.

Model library related car series.

Toyota Camry needs to replace 7-8L antifreeze, which is about 30 yuan per liter. The full name of antifreeze should be called antifreeze coolant, which means coolant with antifreeze function. Antifreeze prevents coolant from freezing and cracking radiators and freezing engine blocks or covers when the coolant freezes when parking in the cold winter.

Many people think that antifreeze is only used in winter, but let's correct this misconception, in fact, antifreeze is not only used in winter, it is used all year round.

The full name of antifreeze should be called antifreeze coolant, which means coolant with antifreeze function, antifreeze can prevent the coolant from freezing and bursting the radiator and freezing the engine cylinder block when parking in the cold season, but we have to correct a misunderstanding, antifreeze is not only used in the winter group, the normal maintenance project of the car, every year of driving, the engine antifreeze needs to be replaced, and the frequency of special vehicle antifreeze replacement is high.

With the improvement of engine structure and the progress of material technology, compared with the old engine, a significant feature of modern automobile engine is that the operating temperature of modern engine is high, and the upper limit of normal operating temperature is generally more than 100. Taking domestic cars as an example, the normal working temperature of the engine is: Shanghai Santana 90 105, FAW Jetta 85 115, Fukang 90 118.

If all the water is filled, when the engine temperature reaches 100, the water will boil and "boil", in addition, the water is corrosive, which will produce scale and affect the cooling effect. Therefore, it is necessary to use a special cold barrier medium antifreeze.

It is a pleasure to serve you Toyota Camry was replaced for the first time 160,000 kilometers and every 80,000 kilometers thereafter. Camry antifreeze replacement: put the original car away, then clean it twice and then fill up the new one, fill up the kettle and start the car until the water temperature is normal, the electric fan starts to work, and then check the antifreeze in the kettle.

If it's less, add some antifreeze and check it a few times in the next few days. The full name of antifreeze should be called antifreeze coolant, which means coolant with antifreeze function, antifreeze can prevent the coolant from freezing and bursting the radiator and freezing the engine cylinder block when parking in the cold season, but we have to correct a misunderstanding, antifreeze is not only used in winter, the normal maintenance project of the car, every year of driving, the engine antifreeze needs to be replaced, and the frequency of special vehicle antifreeze replacement is high. With the improvement of engine structure and the progress of material technology, compared with the old engine, a significant feature of modern automobile engine is that the operating temperature of modern engine is high, and the upper limit of normal operating temperature is generally more than 100.

Taking domestic cars as an example, the normal working temperature of the engine is: Shanghai Santana 90 105, FAW Jetta 85 115, Fukang 90 118. If all the water is filled, when the engine temperature reaches 100, the water will boil and "boil", in addition, the water is corrosive, which will produce scale and affect the cooling effect.

Therefore, a special cooling medium is used: antifreeze.

Toyota Camry antifreeze replacement tutorial.

1.Let the vehicle sit for half an hour before changing the antifreeze, as the temperature of the antifreeze is relatively high when the vehicle is just turned off. Unscrew the drain screw at the bottom of the tank to drain the old antifreeze completely.

2.Keep the car idle while pouring clean water into the antifreeze tank. The principle is that the original antifreeze can be rinsed with clean water, and the filling can be stopped when the water flow has no color, which means that the original antifreeze is completely removed.

3.After the water stops dripping, install drain screws to make the mountain, and then turn off the engine. At this point, the reservoir is filled with antifreeze and between the minimum and maximum scales. It's okay to accidentally add extra antifreeze.

4.The engine is ignited again, and after idling, the air is discharged from the cooling system, causing the antifreeze level to drop.

5.Once the liquid level is stable, add antifreeze between max and min, and then replace the antifreeze. Medium slip beam.

1.The easiest way to do this is to use a syringe and a distributed thin catheter to aspirate excess antifreeze.

2.There is a drain valve underneath the cooling fan that can be unscrewed to drain excess liquid. (Don't try it lightly.)

The pressure inside the tank is huge, and not venting the pressure or incorrectly venting the pressure will endanger personal safety. Moreover, the drain valve is not fully exposed, and some of the sales are hidden, which is more difficult to operate. )

Millions of car purchase subsidies.