The machine cannot install the EXE file and the installation file 100 in the CD

Install a winwar first, you may not have it installed.

All system files are copied directly from the CD-ROM and can be used to install the system directly.

1) Copy all the copied system files to a directory folder on the boot USB flash drive.

2) Start the computer into PE with the boot USB flash drive, and select the appropriate way to install the system according to the type of system file being copied.

a) way, double-click on the program to start the installation.

b) Gho file type, run ghost cloning software to restore to the target disk.

3) After restarting the computer, boot the hard disk to complete the subsequent installation.

Hello, generally no, you need to burn the system image file (ISO format) to the CD. If you copy it directly, you will not be able to start the bootloader, and you can only install it on the hard disk.

No, you need a system installation file or a ghost file to install.

I personally have done it to share with you, I hope it will be helpful to you.

1.Open the CD, copy it all to your computer and create a new folder with a name (it can be your system abbreviation or whatever you like), and then compress the folder to use as a system image. It can be copied to a USB flash drive, or it can be installed directly on the computer, and the installation method is available on the Internet (generally directly click on the hard disk to install the application).

2.With winiso mirror software, there are many tutorials on the Internet.

Winiso is a CD-ROM image file format conversion tool and can directly image disc image files! Winiso runs on Windows 95 98 Me NT 2000. It can handle almost all CD-ROM image files, including ISO and Bin.

With Winiso, you can add a delete to a rename the extracted file inside the image file. You can convert image files in other formats to standard ISO format, while you can also create ISO image files from your CD-ROM. Features:

It is the first software to be able to directly bind ISO or almost any format image file! 2.You can convert almost any image file format, including bin, and save them as standard ISO files.

3.It supports almost all known CD-ROM image files, including some image files for virtual optical drives. 4.

You can create an ISO file from a CD-ROM. 5.You can select image files or directories, and any of these files are based on which to create a standard ISO image file.

6.Ability to open an image file, display the file directory tree, and then run the file inside the image file. This makes it easy to view the Run File or Installer file.

7.Thanks to its file association, you can open it in Windows Explorer by double-clicking directly on the ISO file. 8.

It's easy to use, but it's very powerful!

Grab the file with ONES software first, I don't know if yours is the audio or the software installed or the program file, no matter how to extract the encrypted file first, and then burn or make an image after the extraction is completed.

1) Insert the disc of MasterCam SP1 and execute.

2) The MasterCam Version SP1 interface appears and press Next

3) The second screen appears, select Install MasterCam

4) The MasterCam Setup screen appears and press Next

5) A dialog box pops up, press yes

6) Enter user name (optional), company name (optional).Press next

7) Select the system unit, English(inch)--Imperial, Metric(mm)--Metric. Press next

8) Customize or accept the default installation directory. Press next

9) Select Install Module, select all, press Next, and then press NextStart copying the file.

10) A dialog box will pop up after copying, press"OK".Then the system prompts: the default post is already installed, do you want to install another post?You can choose yes or no. depending on your needs

11) Press Next and press Finish to restart the computer.

12) Execute the disc under the crack directory.

13) The first dialog box appears, press next

14) Select the installation directory, note that this directory must be the same as the installation directory of Mastercam SP1. Press Next to start replication.

Try to decompress with winrar.,I used to have a ** to decompress to see.,I also used mirror software.,But the effect is not good.。 I see when installing Winrar that I can decompress the ISO format. Unzip can be seen.

Use nero to copy the disc and make it into an image file.

Is it piracy - that's lost files. For example, dll files. Or you want to sign up for a list.

Look for the files inside to see if they are registered. Some can only be used after registration. For example, when I copied the Pro Evolution Soccer from an Internet café, I searched for a long time to find a registration list.

Is your disc normal, some pirated ones are not burned well, can you install them with a CD?

Files that can be installed, double-click the file. Copy and paste the rest.

Open My Computer - Double-click the drive letter with the disc drive letter and the disc content name (if any), open the drive letter, double-click on the OR or to run the installation. Set the directory and enter the necessary information as prompted, and then follow the next step until the installation is completed.

What's the content of your CD?

If it's an installation file.

You see that the file suffix is exe, just click to install.

If you accidentally click on the wrong file, you can click on the file that you clicked on the wrong one, right-click on the open method, and use back your previous file type.

Double-click on the extension Yes. exe file will do the trick. (For example, another possibility: run it without installing it, right?)

Try it, but if it doesn't work, it won't work.

You only need to copy the system files from the disc and put them into the boot disk of the U disk. (Directly.)

The system files in the disc can be copied out, and then directly copied or sent to the USB flash drive).

1. Use the U Depth U disk boot disk maker to make a good boot U disk.

2. Ghost Win7 system image file.

Step 1: Complete the U depth U disk boot disk.

Step 3: Change the computer mode to AHCI mode, otherwise the win7 system will have a blue screen after the installation is completed.

1) Formal installation steps: U depth U disk boot disk connected to the computer, after restart, press the start shortcut key when the boot interface appears, wait for the system to enter the U depth main menu, select and run U depth win8pe installation maintenance version (new machine), enter key to confirm.

2) After entering the PE system, the system installation tool that comes with the PE system will pop up by itself"U Depth PE Mounting Tool", click"Browse"Select the win7 system image file stored in the USB flash drive, the installation tool will automatically load the installation file required for the system image package, we just need to select the installed disk partition, and then click"OK"Keystroke.

3) Do not modify the pop-up prompt window, press it directly"OK"Can.

4) After waiting for the disk to complete the formatting, the win7 image file will be installed.

5) After completing the above operations, you only need to restart the computer for subsequent installation, and you can enter the win7 system after completing the subsequent settings.

Refer to the tutorial.

If your system disc is a standard installation disk (not an image file ISO or ghost), then you need to make the entire file of the system disk into an image file on another computer, and then copy it to your computer (do not put it in the C drive), and then install a one-click ghost software on your computer, restart the computer, select one-click ghost when the selection appears, and then select this image file.

You install it without entering the system.

Install the system disk.

After booting up, keep clicking that key,Select CD in the box you enter,***Optical drive can be started。 Select "Install system to first partition" to reinstall the system.

First find the disc in the movable storage device and enter the disc Find and click the icon to open it and it will be installed automatically Good luck.

After putting it in, restart the computer, the computer will automatically eject the installation disk, if not, just double-click the *** disc in my computer. Once opened, follow the prompts to finish.

Click the icon to open it and it will be installed automatically! Hehe!

There are usually programs that run automatically.

If not, find the suffix yes. exe.