-
Recommendation: 100Calm because you are not afraid of death, I am calmer than you because I am not afraid of you death.
-
With the continuous upgrading of industrial products and the rapid development of high-tech industries, centrifugal fans and axial fans are more and more widely used in heat dissipation in industrial products.
First, the principle is different.
1.Centrifugal fan principle: the air flow flows axially into the rotating blade, which is thrown to the outer edge of the impeller under the action of centrifugal force and discharged from the air outlet.
2.Axial fan principle: the gas enters the rotating blade axially and is pressurized and then discharged axially from the other side.
Second, the structure is different.
1. The centrifugal fan is generally composed of an impeller, a casing, a capacitor starter, a motor and transmission parts (such as a spindle, a pulley, a bearing, a V-belt, etc.). The impeller is composed of a wheel disc, a blade (the number of blades is generally 8 16), a wheel cover, and a shaft disk. The chassis consists of worms, side panels, and outriggers.
The centrifugal fan can use forward or backward blades, which is more suitable for the requirements of air volume and pressure. Moreover, the cabinet can be muffled, which has obvious advantages in noise indicators. The motor and the fan are generally connected by shafts.
2. The axial fan is generally composed of fan blades, shells and motors, and the fan blades are divided into metal fan blades or plastic fan blades, and the shells are metal shells and plastic shells. The blade diameter of the axial fan is limited to the diameter of the housing, and the motor is generally in the fan. The axial fan of the metal fan blade is generally an external rotor structure, with high speed, large inertia, high and low temperature, moisture-proof and long-term work in the harsh environment with large dust.
On the other hand, the plastic leaf has an internal rotor structure and generally works in an indoor environment.
Third, the difference between air volume and wind pressure.
1. The centrifugal fan has a high pressure coefficient and a relatively low flow coefficient, which is divided into high pressure (15000 3000pa), medium pressure (3000 1000pa) and low pressure (1000pa) according to the pressure.
2. The axial fan has the characteristics of low pressure and large flow, and is divided into high pressure (500 5000pa) and low pressure (500pa) according to the high and low pressure. Low pressure is mainly used for ventilation and heat dissipation in general places.
Fourth, the difficulty of installation is different.
Centrifugal fans are often installed at the inlet and outlet of air-conditioning units, boiler drums, induced draft fans, etc., and the installation is more complicated. Axial fans are often installed in cabinets, ventilation and heat dissipation, air ventilation and circulation, air ducts or front and end exhaust air ducts at the inlet and outlet of air ducts.
-
A centrifugal fan system comprises a casing, a plurality of fan blades, a ring wall and a body. The liquid housing has at least one chassis ring located around the perimeter of the housing, and the fan blades are enclosed on the chassis disturbance.
The motherboard is burned, send it for repair!
1.Don't be anxious and afraid of water ingress Unplug the power supply immediately and remove the battery. (Remember, never test or plug in the battery power before booting it). >>>More
Most laptops have cooling fans, but some Apple models don't have fans. >>>More
The temperature is high and the fan is loud.
This kind of fault is mostly because the fan is dirty or damaged, and it is mostly dirty, and it will be okay to send it for repair and dismantling, and if it doesn't work, you need to replace the fan. >>>More
The fan speed varies according to the current work of the computer, and it is normal for the general speed to be between 3500 and 6000 revolutions per minute. >>>More
It is normal for the fan to rotate, as long as the CPU workload increases when running large software, then his heat dissipation will also increase. In addition, the "little creaking sound" you mentioned is the sound of the hard disk, when the machine reads the contents of the hard disk, the hard disk will have a little sound, as long as it is normal to think like this often.