Laptop connection to broadband. Can I set up wifi?

Yes, if you want to surf the Internet on your laptop, you can prepare a wireless router and use wifi to access the Internet, the specific operation is as follows:

1) Connect the router and enter the address you see on the router in the browser, which is usually.

2) Then enter, enter the corresponding account and password, generally the new ones are admin.

3) After entering the operation interface, there is a setting wizard on the left, and the attack enters (generally it pops up automatically).

4) Enter the setup wizard interface, click Next, enter the Internet mode setting, you can see that there are three Internet access options, if it is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer; The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

5) Select PPPOE dial-up Internet access to fill in the Internet account and password, and then enter the wireless settings after the next step, after setting the wireless and password, enter the next step;

Open it. <>

Right-click on the Network property.

<> just enable wireless and disable broadband.

Does your laptop have a wifi module You use the optimization master or Master Lu to check your notebook configuration, see if there is a wifi module, if you don't go to the outside store to spend dozens of yuan to buy a wireless receiver, plug in and install the driver to receive wireless.

On the computer, click on the network and sharing center to set up a new connection or network, set up a new network connection, click broadband, and click OK according to the prompts.

Tools Ingredients: Lenovo resells Y7000, Windows10, local settings.

1. Set up a new connection or network.

Go to Settings, click Network & Sharing Center, and select Set up a new connection or network.

2. Set up a new connection.

Click Connect to the Internet to set up a new connection.

<>3. Broadband connection.

Click Broadband, enter the Broadband password name Whether to allow others to connect, and after the setting is successful, click OK.

OK. Taking Windows 10 as an example, here's how:

1. Click the "Windows" menu in the lower left corner, and then click "Settings", as shown in the figure below.

2. Then click "Mobile Hotspot", as shown in the figure below.

3. Set the function switch of the mobile hotspot to the open state, and you can see the name and password of the wireless network in the socks below.

Laptops can be set up as WiFi hotspots. The setup method varies depending on the operating system. The following are the two methods for Windows 10 and Windows 7.

Windows 10 operating system setup method:

1.Tap the "Windows" menu in the bottom left corner, and then tap "Settings".

2.Click "Mobile Hotspot", set the function switch of the mobile hotspot to the enabled state, and you can see the name and password of the wireless network below.

Windows 7 operating system setup method:

1.First of all, open the dry network in the lower right corner of the laptop desktop, and after the interface pops up, you can see "Set up a new connection or connection to the network", just select it.

2.Once inside, you can select it again to set up the temporary wireless network. Need to set up a password and the like, the password is generally more than 8 digits, you can combine letters and numbers yourself, there will be a prompt to choose the type, just choose according to the prompt.

3.Once the setup is complete, other devices can connect to the wifi hotspot and surf the Internet.

Can you set up a separate wifi when the computer is connected to broadband, 1. Open the browser on the computer, enter the login address of the wireless router tanker:, enter, enter the management user name: admin, password:

admin, OK (different brands of routers have different login addresses, management stool users and passwords, you can refer to the wireless router manual); 2. After entering the wireless router, set up the wizard, next, select the PPPOE dialing method, next, enter the Internet access and password, next; 3. Set the wireless network name below the SSID, and set the wireless network password with at least 8 digits below the PSK, and correct the next step. 4. Save and restart the wireless router according to the prompts. Hope it helps.