Laptops can not use Telecom Security Broadband after WiFi

Yes, generally after the fiber enters the home, an optical modem will be equipped to convert the optical fiber signal into a network cable signal.

If you want to surf the Internet on your laptop, you can prepare a wireless router and use wifi to access the Internet, the specific operation is as follows:

1) Connect the router and enter the address you see on the router in the browser, which is usually.

2) Then enter, enter the corresponding account and password, generally the new ones are admin.

3) After entering the operation interface, there is a setting wizard on the left, and the attack enters (generally it pops up automatically).

4) Enter the setup wizard interface, click Next, enter the Internet mode setting, you can see that there are three Internet access options, if it is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer; The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

5) Select PPPOE dial-up Internet access to fill in the Internet account and password, and then enter the wireless settings after the next step, after setting the wireless and password, enter the next step;

There is broadband and routers to carry out wireless Internet access, computers, mobile phones and other equipment are through the router and broadband Internet access. Router Setup Method:

1. Plug the external network cable into the WAN port of the router. Plug the router's power adapter into the power connector and turn it on. The external network cable is a network cable that comes out of the optical modem, and if the network cable enters the household, this line is the external network cable.

3. After connecting to wifi, open the mobile phone browser, and enter the gateway to enter the router in **** or **.

4. After filling in your Internet account and password, setting your own WiFi name and WiFi password, click Save, and the setting is successful.

1: WiFi is not to have a computer and then broadband to install. Most people are confused by the definitions of broadband and wifi, in fact, the two are not directly related, without broadband, we can turn on wifi, but it cannot allow our wireless devices to connect to the Internet.

All in all, wifi and broadband are not one and the same.

2: WiFi is a wireless network, usually converted by a wired network, so it has nothing to do with the computer, but if there is no network cable, you can only use the neighbor's house.

3: 3G wireless network card + tariff card or mobile phone traffic can theoretically be converted into wifi, but it is not cost-effective. Some places have free or paid wifi signals, such as China Mobile's wifi.

4: Broadband is a must-have, router is a must-have, ADSL only needs ADSL cat, router and set the Internet parameters of the router through the browser of the smartphone;

5: Optical fiber is more troublesome, be sure to use a computer (laptop or desktop can be) to connect to the optical modem, register LOID, and the rest is the same as ADSL setting.

wifi, not noun explained.

Let's just say that when you connect to WiFi, you are connected to a hotspot (AP), and this AP has an access portal, which may be broadband in your place.

Then there is the computer, without a computer, you have mobile phones and other equipment, TV boxes and boxes, you can use wired and wireless to access the Internet.

So, wifi....He has to have a master to give you data, and you are considered a next home. It may be easy to understand with upstream and downstream.

Broadband is a must, a router is a must, ADSL only needs ADSL modem, router and through the browser of the smartphone to set the router's Internet parameters; Optical fiber is a bit more troublesome, be sure to use a computer (laptop or desktop can be) to connect to the optical modem, register the loid, and the rest is the same as ADSL settings.

If you don't have a computer, ask someone else to set the wifi name and password when you buy wifi, and go home and connect the Internet cable.

No, you can use wifi with broadband in installing a router, and it doesn't matter if you have a computer or not. Seek adoption.

You need broadband to use wifi, and you need a computer to set wifi parameters.

If you have broadband, you can install a wireless router and you can connect to the network wirelessly.

You can do it by the router, and the computer is to set the password at the beginning.

Yes, as long as the router is installed, there will be wifi.

No, it is necessary to have a fixed **.

Yes, there must always be a source.

Answer: You can't install wifi without installing broadband, and wifi is also based on broadband transmission signals. The best way is to pull a broadband, and then buy a wireless router to transmit wifi signals.

Broadband, in basic electronics and electronic communications, describes a continuation or electronic line that contains or is capable of simultaneously handling a wide range of frequencies. Broadband is a relative way of description, and the larger the frequency range, that is, the higher the bandwidth, the more data can be sent.

For example, in radio communications, a signal with a narrow frequency range can only send Morse code, and a large bandwidth is required to send high-quality **. The broadband of a TV antenna represents the ability to receive a larger number of channels. In terms of data transmission, the same ** line is used as the signal transmission medium, fiber optic cable is becoming more and more popular, modem can only send 64kbps of data per second, broadband ADSL and fiber optic modem can provide a higher transmission rate.

Hello, yes, you can buy a router to build a wireless network.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Not necessarily the reason:

1. Record the password of the Internet account.

2. Let the staff with broadband set up the network.

3. Let the staff set the Internet account and password to the wireless router 4. Mobile phone, tablet can enter the connection password set in the wireless route to access the Internet 5. If you use a computer, connect the computer with a network cable and a wireless router, you can go to the Internet, and you don't need to set an account password.

Broadband is a must, a router is a must, ADSL only needs ADSL modem, router and through the browser of the smartphone to set the router's Internet parameters; Optical fiber is a bit more troublesome, be sure to use a computer (laptop or desktop can be) to connect to the optical modem, register the loid, and the rest is the same as ADSL settings.

Of course, this is not necessary, and many of them now only use mobile phones and tablets and other devices without computers, but it is more convenient to have a computer if you want to set up wireless routing. Of course, it doesn't have to be.

How best to describe you?

It's what compares you to is special.

The feeling for you is intense.

But I don't know much about it, I just feel it.

You're as comfortable as I am under the covers.

But it is like the wind, and I can't figure it out.

If you need to access the Internet, you can do it, otherwise it is useless to install broadband.

But it's best to have a computer when installing broadband, look good at whether it's installed, and look at the speed of the network.

If you install broadband not for computer Internet access, you need a router, set the number account password in the router, and automatically dial up to connect to the broadband. If you don't use a router, you need your Internet device to have dial-up capabilities.