How to turn on the adaptive headlights of the a6 and how to adjust the headlights of the old Audi A6

The headlights of the car can be adjusted to low beam and high beam, and the brightness of the current headlights can be adjusted according to the digital indication, and the height and distance of the headlights can be adjusted freely.

The purpose of adjusting the height of the headlights is to avoid danger by adjusting the height of the headlights in order to obtain the best illumination distance. This is a safety light configuration that uses an electric motor to electrically adjust the height of the headlights to achieve the best possible illumination distance and avoid hazards while driving.

Precautions for the use of car headlights:

1. The user needs to do a good job of daily maintenance for the car, whether the oil filter needs to be replaced, whether the brake is good, and the same car headlight bulb also needs to be regularly checked to see if it is in good condition, and it also needs to be replaced in time.

2. Generally speaking, every 50,000 kilometers or about 2 years of the car, the brightness of the headlight bulb will be weakened, at this time you need to go to the 4S store for testing, if the brightness of the lamp is insufficient, it is best to replace the bulb in time, and it is best to replace the left and right sides at the same time to keep the brightness uniform.

Open the front cover of the engine, see that there is a hexagonal hole above the left and right headlights, and adjust the distance and height of the headlights by changing the cone with a hexagonal cone.

The Audi A6 headlights can be adjusted up and down by manually adjusting the electronic switch, and cannot be adjusted by mechanical means, and the specific operation steps are as follows:

1. Press the brake pedal of the Audi A6 and prepare to turn on the power of the whole car.

2. Press the one-button start button of the Audi A6.

3. The dashboard of the Audi A6 lights up, and the power supply of the whole car is turned on.

4. Roll the headlight height adjustment roller of Audi A6, upward is too high for the headlight, and down for the headlight to lower.

5. When rolling the rollers, the headlights of the Audi A6 will move up and down with the operation.

No.

The height and brightness of the Audi A6 headlights are automatically adjusted by the car itself after judging the environment and road conditions. The Audi A6 has the word "Auto" on the light lever on the lower left side of the steering wheel, which is its automatic headlight function.

The Audi A6 automatic headlights are sensors on the inside of the front windshield that can sense changes in ambient light. If the light is dimmed, the headlights can be automatically turned on to improve driving safety.

Even if you forget to turn off the automatic headlights when you stop at night, pulling out the car key will automatically turn off the function, which can completely avoid the battery loss caused by the headlights not turned off.

The old A6L: There are 2 adjustment points at the rear of the headlights, the low beam height of the headlights does not exceed the height of the wick, the left and right are straight, the high beam does not need to be adjusted, the position of the filament is fixed relative to the low beam filament, ** A6L: It should be automatically adjusted according to the vehicle load, and the automatic adjustment will be started every time the headlights are turned on to avoid affecting the other party's vehicle too high.

Summary. It is necessary to know the reason why the headlight is faulty and the light is on in order to clear it. There are generally two situations when the fault light is on:

First, the fault light is on, and there is no obvious abnormality in the headlight. This situation mostly occurs after the owner changes the lights and it is a model that needs to be decoded, the reason is that the fault light is on due to decoding problems. The second is that the fault light is on, and the headlight has obvious faults.

For example, the headlights are not on, or the headlights are not on properly.

It is necessary to know the reason why the headlight spike is faulty in order to clear it. There are generally two situations when the fault light is on: one is that the fault light is on, and there is no obvious abnormality in the headlight.

This situation mostly occurs after the owner stares at the change of lights and is a model that needs to be decoded, the reason is that the fault light is on due to the decoding of the Kai family repentance. The second is that the fault light is on, and the headlight has obvious faults. For example, the headlights are not on, or the headlights are not on properly.

The main reasons are:1The power line is short-circuited or over-the-top before the light is switched.

2.Headlight fuses trip or burn out. 3.

The light switch bimetal contacts are not in good contact or do not close, or the light switch is damaged. 4.After a certain gear of the light switch is connected, some lamp lines are connected to the iron to cause the bimetal contacts to open.

5.Bad tie hitting. 6.

The light bulb burned. 7.Loose joints or corroded bases increase the contact resistance.

It is recommended to go directly to the auto repair shop or the bureau 4S shop for inspection, and if the lamp has been changed, go directly to the lamp shop to deal with it.

The Audi A6 comes standard with automatic light height adjustment. The height sensor in the chassis suspension adjusts the headlight height according to the time of change in the height of the vehicle to ensure optimal illumination.

The Shoudi A6 incorporates Audi's most advanced high-tech exclusive technology, further enriching the luxury configuration, giving it a super sporty character, and reflecting its perfect quality from design to performance. It is characterized by being more luxurious, sporty, and sophisticated. Luxury is mainly reflected in BOSE audio, TV ***, refrigerator, are the world's loss type of brand-name products.

The more dynamic is reflected in the sports seats and steering wheel; The maturity of the Audi A6 is reflected in the successful upgrade of the Audi A6, which not only meets a new standard, but also has a high level of reliability.

Bi-xenon headlights, automatic headlight cleaning, and automatic dimming are the basic equipment of the A6 series. Luxury equipment adds a leather steering wheel and seats, heated seats, wood trim, power rear window visor and Bose stereo. Technologically advanced equipment adds memory front power seats and mirrors, auto-dimming mirrors, front and rear parking warning radar, cruise control, and power steering adjustment with speed.

The sports package has front sports seats, a sports steering wheel with shift buttons, 215 55 R16Y tires, 7JX166 sports wheels and a "Sportious" logo. The most important part of the executive ** is a small table in the right rear seat, two *** TV screens installed behind the headrests of the front seats, and a minibar including a small Xiaoice box and an empty compartment that can hold champagne glasses.

Millions of car purchase subsidies.

The reasons for the failure of the Audi A6 adaptive headlights are as follows: 1. The engine has too much carbon deposit, which leads to a bad combustion state of the engine, which may cause the fault light to turn on. Generally, at this time, it is necessary to check the engine in time and find the nearest vehicle repair shop for maintenance.

2. The oxygen sensor of the engine is faulty. This kind of failure will make the engine fault light light yellow like an old light, but it will not affect the normal driving. 3. Problems such as blocked carbon deposits in the fuel injector or intake valve will cause the failure light to turn on.

Extended information: The Audi A6 incorporates Audi's exclusive high-tech technology to further enrich the luxury configuration and give it super sporty characteristics, characterized by luxury, dynamics and maturity.

1. There is a switch on the left side of the cab, and the headlights can be turned on by twisting the switch, and it can also be set to automatic mode (auto), which is safer.

2. When the lights are on, press down the handle of the left hand of the steering wheel to turn on the high beams.

What is the use of automatic headlights in Audi A6L cars, how to switch on and off the automatic headlights of Audi A6L, there will be steps below, but Brother Qing is actually very simple, and the method is the same for many models.

There is an Auto position on the Audi A6L car light button, which is the automatic mode. It is controlled by a photoreceptor on the right side of the front instrument panel corresponding to the front windshield, which is generally said to have a photoresistor-like feeling. When the car is driving, if there is enough light in the surrounding environment, the photoreceptor will actively turn on the circuit and turn on the lights in the hall.

If the headlights of the car are turned on when they are in a dim place, or when it is dark, they will automatically turn off when they reach a brighter place. This is the effect of the photoreceptor itself. That's why it's called an automatic headlight.