What happens when there is water sound in the radiator?

The main reasons for the sound inside the radiator are:

1. It is mainly caused by the uneven flow of water in the radiator or the debris being washed, and the sound caused by the debris in the radiator is mainly caused by two reasons, one is that there is slag or plugging during welding, and then the impurity sand in the heating system enters the radiator to precipitate and is washed by the water flow to produce sound.

2. The interface from the heating system to the radiator is not smooth, the heating valve is not fully opened or the opening is too small, the valve produces a sneering sound, and it may also cause the heating water to impact the pipe wall of the radiator and produce noise.

3. It will also make a sound when the inflow and return of water flow are not balanced.

Self-heating users, there is a sound inside the radiator:

1. What to do if there is a resonant sound in the radiator: The radiator emits a "buzzing" sound, which is endless, especially in the dead of night. Solution:

All radiator mounting brackets must be equipped with nylon damping gaskets at the hooks of the radiators, and the pump gear must be lowered when the head is sufficient.

2. What to do if there is a whistle sound inside the radiator: The radiator emits a sound similar to whistling, which is relatively sharp. Solution: Turn the pump down one gear if the system head is sufficient, or install a differential pressure bypass valve at the inlet and outlet.

3. What to do with the sound of water flow in the radiator: when you hear the sound of "bang, bang", it means that there is a large amount of air in the heating system, and when the air and water flow at the same time, it will cause a local lack of water and underflow, so that the water flow will make a sound when the water sagging inside the radiator sagging and colliding with the inner wall. Solution:

A precision decontamination device with an exhaust valve is installed on the output line of the water pump.

Central heating users, there is a sound inside the radiator:

1. It's good to start adjusting it yourself, first turn off the water inlet and return water of the radiator valve, the return valve must be closed, and then open the water inlet valve, turn over the running air above the radiator, turn off the running air after the air in the radiator is all released, and then gradually twist the return valve. Until there is movement, it will be good until there is no movement.

2. If there is movement in how to regulate the backwater, twist the backwater to adjust the water supply. If there is still movement, it is good to close one valve and then adjust the other. The principle is to balance the inlet and return flow of the heating, so that the balance of the water flow will not impact the debris and cause movement.

When adjusting the temperature of the radiator, it is best to adjust the two valves together.

It is not normal for this to happen. It is easy to cause the radiator to not be hot. In the case of single-household heating, it is generally implemented to maintain pressure with full water. At the beginning of operation, the air inside will be exhausted during commissioning, and the sound of water flow will not be generated, and the heating effect will be better at the same time. Jingfeng HVAC answer.

The radiator has the sound of water running and is not dangerous.

First of all, check the reason why the radiator has the sound of running water, if it is caused by the gas in the pipe and the radiator or the water is not enough, in this case, you only need to open the radiator's venting gate until the water flow is intermittent. If the water flow in the radiator is uneven or there are debris washed out, drain the hot water in the radiator first, and then clean the radiator to remove the debris inside.

Radiator precautions.

1. Don't open the window for too long: if the room needs to be ventilated, it is best to control the window for 10 minutes, so that the heat loss is relatively small.

2. The pipeline valve can not be opened and closed at will: when the heating system is run for the first time, it is generally necessary to debug, adjust the valve of each riser to the appropriate position, open the manual release valve of each radiator, and discharge the air collected in the radiator.

3. The position of the radiator cannot be changed: the radiator is installed in a position that is conducive to indoor heating, which can ensure that the air convection and indoor temperature are relatively average, and once the position is changed, it will cause an imbalance in the indoor temperature.

That's the water circulation, the circulation of cool water and hot water. This way the house can be warmed up.

The sound of water flow is caused by the fact that there is gas in the pipeline, and the automatic exhaust valve cannot completely discharge the air in the pipeline. The way to do this is to see if there is a manual exhaust valve on the radiator and exhaust it yourself, or turn the return valve a little smaller and give it a try. See if the exhaust valve is at the highest point of system engineering, and whether the pipeline has the phenomenon of backslope

After heating, some users will always hear the sound of running water in the radiator when they sleep at night, which seriously affects the quality of sleep. So, there is the sound of running water in the radiator when heating, what is going on, let's follow Jin Jin to find out.

In fact, in the early stage of heating, it is normal for there to be a sound of water flowing in the radiator, because a few days before the start of heating, there is gas in the pipe and radiator and the pipe is not filled with water, and the gas swims in the heating pipe network with the water flow, so it will make an intermittent sound, which is actually a normal phenomenon and does not need to worry.

After heating for a period of time, if there is still a sound in the radiator, the following treatment can be done:

1.Turn off all the inlet and return water of the radiator valve;

2.Open the water inlet valve, then open the exhaust valve above the radiator, discharge the gas inside the radiator, and close the exhaust valve;

3.Twist the return valve until there is a sound and then go to the ** section, until there is no sound.

If the radiator has an abnormal noise instead of the sound of water, it is more like the sound of metal knocking, it is due to thermal expansion and contraction. When heating is heated, the radiator is heated and expands when it rubs against the metal bracket mounted on the wall, which produces sound.

It is recommended that users stuff a moderately thick piece of paper in the gap between the radiator and the metal bracket to solve the problem.

1.The amount of water incoming and returning to the radiator is unbalanced and uneven, resulting in the sound of irrigation in the radiator.

2.There is a lot of air in the radiator or radiator, so when it is used, it will hit the inner wall of the radiator due to the flow of water, making a sound similar to watering.

3.It may be because of the thermal expansion and contraction of the radiator, so the friction between the radiator and the metal bracket on the wall produces a strange sound.

The air inside the radiator is the main culprit for the abnormal noise and lack of heat in the radiator, and the air inside the radiator will cause the water circulation inside to collide with the radiator, and the water flow and the radiator will produce a crashing sound.

I believe that many people are familiar with radiators, because now many families are using it for heating, it is not only beautiful in appearance, the heating effect is also very good, and it is easy to use. Using a radiator requires a certain understanding of it, so what is the matter with the sound of water in the radiator? How to clean the radiator?

The radiator is so bright, there is a sound of water in the vertical, what's going on.

The sound of water in the radiator may be that the interface between the radiator and the heating system is rough, or the opening of the heating valve is too small. An uneven flow of water into and out of the water can also lead to the sound of water, in fact, if the center pipe of the radiator is filled with water, then sometimes it is normal to have the sound of water.

How to clean radiators.

1. Clean the finger surface of the table key.

The interval between the use of radiators will be relatively long, and when they are not in use, they will be forgotten in the corner, and it is easy to accumulate dust, and if it is a radiator in the kitchen, there will be oil stains. Therefore, the radiator should be cleaned before use. You can gently wipe the radiator with a clean, damp rag, if it is an old-fashioned cast iron radiator, the surface is rougher and needs to be wiped several times.

2. Filter cleaning.

The main function of the filter screen is to filter some impurities in the water and prevent it from flowing into the heating system and causing pipe blockage. If the filter is not cleaned, it is easy to cause the water flow in the pipe to be unobstructed, which will affect the heating effect. When cleaning the filter screen, first open the filter plug, then take out the filter screen, clean it, and finally install it, and tighten the plug.

If you don't know how to clean, you can ask a professional for help.

3. Clean the inside of the radiator.

After the radiator has been used for a long time, there will be scale inside the pipe and the system, and it will accumulate more and more, and there will be some sediment and rust, which is easy to cause the pipe to be blocked and the water flow is not smooth. RUDN not only affects the heating effect, but also easily damages the heating system, so you should find a professional cleaning personnel to do a comprehensive cleaning every two or three years.

The sound of water in the radiator is caused by the presence of air in the duct or the large number of stains attached to it.

1.In the presence of air, the valve of the radiator can be opened, and a container can be placed under the valve, and all the air inside the radiator can be released until there is a smooth flow of water out, and then the valve can be closed to eliminate the sound of running water of the radiator.

2.In long-term use, part of the dirt in the water will adhere to the inner wall of the pipe, and will form an accumulation after a long time, if there is a large amount of dirt in the warm sheet, the sound of running water will also occur after the impact of the water flow, then you need to find a professional cleaning personnel to remove the scale inside the heating to keep it smooth, and the sound of water flow can be reduced.

What is the reason for the sound of water in the radiator? What should I do if there is water sound in the radiator?