How to set up wireless Internet access with a wireless router?

The simple setup method is as follows:

The route should reset it and restore its original settings by pressing reset at the back, after which you set it up again

Plug a wired broadband network cable into the wireless router WAN port, and then use a network cable to connect directly to your laptop (or desktop) from the LAN port. Then open the browser, enter generally, or, (see your manual) enter the management and password, generally admin, enter the setup wizard, fill in step by step, according to your broadband** to make a choice, if it is adsl, you need to fill in the username and password, if it is a fixed IP address or not a fixed IP address of broadband, you have to fill in the necessary information, fill in all the way, very simple. For the security of data and wireless network, you go to the special wireless column to start the key, generally choose the wep method, fill in the key you want to set, pay attention to the number of key bits, see your page prompt, and then select the route in the route to restart, not manual power off, and then it's OK, search for the routing signal, enter your preset password everything OK!

The owner will tell you when you buy it.

The settings of each brand of router are different, please provide the specific model of the router.

The first step is to check with a computer: Start - Run - cmd - Enter. To display the Administrator dialog box, enter "ipconfig all" and make a note of the default gateway as My Computer Displays:,Subnet Mask,.

The second step is to set up the mobile phone WLAN, start --- set up --- connect to --- WLAN--- turn on the WLAN--- wireless network---configure the wireless network" select your own Chinanet--- select "Next" after entering the --- next step --- complete.

Go back to ---Configure Wi-Fi" and select "Network Adapter" -- Configure --- default Internet settings for the network adapter DHD Network Ad--- select "Use a specific IP address" to fill in the above "IP address" IP do not duplicate the above IP, subnet mask, default gateway, "name server" backup. Click "OK" in the upper right corner to finish.

Turn on the WLAN switch to connect to ChinaNet, and try to connect to the Internet

1) Hardware connection.

Once you have successfully utilized a single computer to go online, follow the steps below to install the router. Please unplug the power plug and keep your hands dry when installing.

a.To establish a LAN connection, connect the computer directly to the LAN port of the router with a network cable, or connect the LAN port of the router to the hub or switch in the LAN through a network cable, as shown in Figure 4-1 below.

b.Establish a WAN connection and connect the WAN port of the router to the XDSL Cable Modem or Ethernet with a network cable, as shown in the following figure.

2) Type in the browser address bar, press the confirm key - in the login window that appears, type the user and password are admin respectively.

3) You can set the broadband connection in the following window. Select the broadband category to go to the next step of settings.

4) After the above settings are complete, click Next to enter the basic wireless network parameter settings.

Wireless Status: Turn the router's wireless function on or off.

SSID: Set any string to identify your wireless network.

Don't turn on wireless security: If you don't turn on wireless security, you won't encrypt your router's wireless network, so everyone else can join your wireless network.

wpa-psk/wpa2-psk：

If you select this option, enter the password you want to set in the PSK password, which is required to be 8-63 ASCII characters or 8-64 hexadecimal characters.

Do not modify wireless security settings:

Select this option to keep the last set parameter in the wireless security options. If you've never changed your wireless security settings, selecting them will keep your factory default settings.

If you have changed the wireless settings, the Setup Wizard as shown in Figure 4-8 will pop up, and click Restart to make the wireless settings take effect.

The first is the wiring, if you are using a cat to surf the Internet, the WAN port of the cat ** router is generally blue. Then use another network cable to connect from the LAN port of the router to the computer. Generally, there will be 1234 LAN ports, and any one of the 4 interfaces can be used, which is generally yellow.

After connecting, see if the local connection of the computer is connected, if it has been connected, open the IE browser Enter the pop-up dialog box, and then enter the account password is generally admin and then enter the routing settings interface, if you are dial-up Internet access to choose ADSL broadband PPPOE mode, click Next to enter your own broadband account and password Click Next, and then set the name and password of your wireless network, and then keep clicking Next, and finally the router will restart, and then you can use the wireless network. I hope it will help you, I hope to adopt, thank you.

Being able to connect to other computers means that other lines are normal except for the bus that is connected to the Internet.

Now there may be problems with the next 2 parts.

1: Bus line problem.

If you can use this cable alone to access the Internet, it means that there is no problem.

2: The Internet access method is not too collapsed to set up.

Generally, the router has a wizard, and if you can't find it, you can directly find the keyword"wan"Then find the way to access the Internet.

Generally, there are 3 types, dynamic IPStatic dialing protocol.

According to your own type of Internet, you can set it up accordingly, such as PPPOE, directly type the account password, save and launch.

3: The router WAN is broken.

If the Internet mode is set up and does not work, you can restore the factory settings to the factory settings and then set the Internet mode again, if you are sure that it is correct, or you can't get on, it may be that the WAN port is broken (that is, the port that is plugged into the bus).

There's another possibility. After setting up the Internet mode in the router, you don't need to run PPPoE on the local machine, just go directly.

First, does your client automatically obtain the IP?

The first macro is noisy and hidden, is your routing room set up to dial or is the web page of the management road tour Go in and see the tease.

Here's how to set up Wi-Fi:

1. Enter on the browser address and enter the username and password to log in.

2Click Setup Wizard.

3Enter the setup wizard interface and click Next.

4Select the PPPoE option and click Next.

5. Enter the broadband account and password, and click Next.

6Enter the Wi-Fi password and click Next.

7Click the Done button and the wireless network is set up.

First of all, if there is a wireless router, then first turn on the power supply, and then plug in the network cable, plug in the WAN port (usually the blue port), and then connect with the computer network cable on which LAN port to plug in, after doing these things, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat") and then enter, Enter the corresponding account and password, generally the new ones are admin After entering the operation interface, you will see a setup wizard on the left, attack (the general ones are automatically popped up) Enter the setup wizard interface Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dialing, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed. If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password, this should be understood by everyone, there will be an account to open broadband, and it will be OK to fill it in Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

The next step is to set it up successfully Click Done, the router will automatically restart, at this time you wait patiently. The interface that appears after success.

Have you set up a PPPoE dial-up connection in your router? Make sure the router has dialed up the link, enable DHCP, if it doesn't work, if it does, it may be that the encryption of your wireless network card and the encryption of the router do not match, change the encryption method of the router.

Connect it to the router with a wired one first, and then enter it in a web browser (preferably IE that comes with the system). There is a router login interface,This is basically the username and password of admin for the first time,Refer to the manual for details,Look at the wireless settings after entering,Remember to set the wireless access password after turning on the wireless。 Otherwise, your Internet speed will slow down after others rub the net.

Second: If you are using someone else's wireless network and someone else's has set up a network key, of course you can't use it if you don't have a password.

Third: Your own Wi-Fi network is not configured, if you want to know how to set it up, you can check it.

If you buy a wireless router, you will have a configuration manual, which contains the administrator's username and password, and you can match it according to the manual

Then enter the username and password, which is your broadband password.

You don't have broadband at home.

If you don't install it, you won't need to use a wireless router.

Even the internet speed is slow.