How high do you need street lights for a 30 meter wide pavement?

To determine how high a street light is needed for a 30-meter-wide pavement, the following factors need to be considered: the lighting needs of the pavement, the illumination range of the street lights, and the installation height of the street lights.

First of all, the lighting needs of the road surface are one of the important factors in determining the height of the street lights. Depending on the purpose of the road surface and the traffic situation, the required level of lighting can be determined. For example, highways require higher lighting levels, while alleys in residential areas require lower lighting levels.

Secondly, the illumination range of the street lamp is also one of the factors that determine the height of the street lamp. Different types of street lights have different lighting ranges, for example, street lights usually have a smaller lighting range, while high mast lights can illuminate a larger area. Depending on the width of the pavement and the size of the area that needs to be illuminated, the appropriate type of street light can be selected.

Finally, the installation height of the street lights is also one of the factors to consider. In general, the installation height of the street lights should ensure that the lighting needs of the road surface are met and do not cause excessive illumination or light pollution. Depending on the type of street light and lighting needs, the right installation height can be selected.

To sum up, determining how high a 30-meter-wide pavement needs to be a street lamp needs to comprehensively consider the lighting requirements of the road surface, the lighting range of the street lamp, and the installation height of the street lamp. Depending on the situation, the appropriate street light type and installation height can be selected to ensure that the lighting needs of the road surface are met.

Summary. Hello, it is a pleasure to have your problem, the solution to your problem is as follows. The foundation of the 5-meter light pole is one meter deep.

Because the base of the pole should be deep, so that the pole can be fixed. If the foundation of the pole does not reach a depth of one meter, the pole is prone to tilting. So how high the pole is, how deep the foundation must be.

The 5-meter-high pole foundation needs to be at least one meter deep, if the pole foundation is not that deep. Poles are easily tilted by the wind, and the lights will often break.

Hello, it is a pleasure to have your problem, the solution to your problem is as follows. The foundation of the 5-meter light pole is one meter deep. Because the base of the pole should be deep, so that the pole can be fixed.

If the foundation of the pole does not reach a depth of one meter, the pole is prone to tilting. So how high the pole is, how deep the foundation must be. The 5-meter-high pole foundation needs to be at least one meter deep, if the pole foundation is not that deep.

Poles are easily tilted by the wind, and the lights will often break.

The depth of the foundation is generally 1 6-1 8 of the height of the light pole, and the length and width are determined according to the lamp type of your street lamp, which is generally 600mm-800mm square. In addition, there should be 4 embedded screws on the foundation (the minimum should not be lower than M20), and the embedded size of the screws is generally 600mm-800mm, don't forget to add the embedded PVC casing.

Summary. The spacing of solar street lights is theoretically the same as that of ordinary street lights, and the spacing is generally 3 to 5 times the height of the light pole.

Generally, the height of street lights is 6 meters, and the spacing is mostly 20 to 25 meters, the height of the light pole is 8 meters, the spacing is 25 to 30 meters, and the spacing of the 10-meter light pole is generally 30 to 40 meters.

However, solar street lamps are installed on rural roads more, considering that they must be installed in the place where the sun shines, and cannot be installed at the door of the villagers, there is no fixed requirement for the installation site, and there is a general location on the line, especially the solar street lamps installed on the wall and the solar street lights on the power station poles, which will be in place, and the spacing is impossible to talk about.

For the main road, the spacing of solar street lights can be uniform, but it is allocated according to the specified number, and there is no fixed situation of how far away.

3 meters high street light spacing.

Hello, happy to answer your questions.

Hello, happy to answer your questions.

The spacing of solar street lamps is theoretically the same as that of ordinary street lights, and the spacing is generally 3 to 5 times the height of the light pole. Generally, the height of street lights is 6 meters, and the spacing is mostly 20 to 25 meters, the height of the light pole is 8 meters, the spacing is 25 to 30 meters, and the spacing of the 10-meter light pole is generally 30 to 40 meters. However, due to the fact that the Yangneng street lamp is installed on rural roads, considering that it must be installed in the place where the sun can be seen, it cannot be installed at the door of the villagers, and there is no fixed requirement for the installation site, and there is an approximate location on the line, especially the solar street lamp installed on the wall and the solar street lamp on the power station pole, which will be in the place, and the spacing is impossible to talk about.

For the main road, the spacing of solar street lights can be uniform, but it is allocated according to the specified number, and there is no fixed situation of how far the mountain is built.

Generally, the spacing is about 20 meters, and the height of the light pole matched by this spacing is about 8 meters, which can adapt to the height of urban greening without affecting the lighting. The light is selected according to this distance and height.

The spacing of street lights is determined according to the nature of the road, such as factory roads, rural roads, urban roads, and the power of street lights is 30W, 60W, 120W, 150W.

The height of the street lamp is determined according to the actual needs and design requirements. Generally speaking, the height of street lights is between 3 meters and 12 meters, and the specific height depends on the following factors:

1.Road type: Different types of roads have different requirements for street lights. For example, urban arterial roads and highways often require high street lights to ensure that the road surface is illuminated and safe. Street lights in alleys and residential areas can be lower.

2.Street light type: Different types of street lights have different height requirements. Common types of street lights include lampposts, wall-mounted street lights, and street lamp poles. Each type of street light has its specific height range.

3.Environmental requirements: The height of street lights is also affected by the surrounding environment. For example, if there is an obstruction such as tall buildings or trees around a street light, a higher street light may be required to ensure illumination.

4.Lighting requirements: The height of the street lamp also needs to take into account the lighting requirements. Depending on factors such as the width of the road and the traffic flow, it is necessary to determine the illumination range and brightness of the street lights. Taller street lights can provide a wider range of illumination.

5.Ease of installation and maintenance: The height of the street lights also needs to take into account the ease of installation and maintenance of the open oak.

Lower street lights are easier to install and maintain, but may not meet lighting requirements. Taller street lights may require specialized equipment and personnel to install and maintain.

In short, the height of the street lamp is determined according to the actual needs and design requirements, taking into account factors such as road type, street light type, environmental requirements, lighting requirements, and ease of installation and maintenance. With proper design and installation, it is possible to ensure that the height of the street lights can meet the lighting needs, improving the safety and visibility of the road.

1. The installation height of the lamps and lanterns must be the same as the installation height of the lamps and lanterns on the same street (the height from the luminous center to the ground). Small bend light: 1 meter lamp, 5-6 meters, ordinary street, Nashanda, long arm lamp and chandelier, meter fast lane arc light, not less than 8 meters, slow lane arc light, not less than Mi Donghui.

2. The special lamp type is installed according to the design requirements, and the height of the lamp is equivalent to the width of the road to be illuminated. When lighting only on one side h l When lighting on both sides h l 2 where, h: installation height of the luminaire (m only) l: road width (m).

Thank you. Please.