My PSP2000, 3000 is broken, who will tell me how to fix it, I am anxious to ask for help!!!! 15 poin

Is your original chickhen2 folder still alive? Copy this folder to the photo folder in the psp folder.

There is also a file that is put in the root directory.

Run PSP, turn on the flash in the ** bar, and restart it after the screen is spent.

That's part 1.

Put the installer-loader folder into the game folder under psp, run psp, and enter installer-loader

Press the L key and press the circle to exit, and after this restart, you can see that the original games can run again.

Above.

First, if your 3000 accidentally deleted the flash file, you should load another flash file!

Second, opening the game says that the file is corrupted. If you load up the flash file and upgrade it to 3000 flash, those games will still be playable.

Third, I haven't used 2000, but will it be that the game limit of 3000 and 2000 is different, and what is the format of your 3000 game? Put it in**?

You go to the Internet and upload a chickhen2, put it in the picture folder, then turn it on**, and run chickhen2 to flash it.

First of all, I told you that 3000 can't be shut down, your 3000 machine is ok when you flash it, and the 3000 system is restored to the original state of not flashing, so you are loading the game is all corrupted files.

It's good to flash the machine yourself.

3000 flashes.

1.Run chickhen2

2.Brush or see for details.

Just add 783825472 and indicate it, I'll tell you, hehe, it's a mistake.

I don't know uh... You go and ask this person, she sells PSP, it should help you 122757254 good luck!

Find someone to take a look at it, and by the way, get other problems, so that you can use it in the future without any problems.

About 3000 flashes.

Actually, I don't understand what you're saying.

Go to the video game store to change the screen, the screen of PSP3000** is about 300, and the general computer has a video game store. Or the landlord provides your area, and I can help you find a video game store.

Friend, now the preliminary judgment is.

LCD screen by you.

If you squeeze it out, if you change an LCD screen, you can generally get it at 280 oceans, but you can also change it to a second-hand one, which is relatively much lower.

However, when changing the screen, there are a few things to pay attention to:

1. Observe carefully.

Whether there are dead pixels on the LCD screen, generally there are one or two bad pixels, which is a normal phenomenon, but try to check it carefully as much as possible;

2. Whether there is color distortion on the screen is a flower screen (this kind of color distortion is equivalent to gently squeezing with your fingers.) Naked screen. Target.

That kind of distortion, check it carefully! ）

3. Whether the screen exists.

Color brightness is uneven.

of imagination. 4. Whether the color is full (because of the screen saturation of PSP3000.)

as well as brightness. Far away.

Higher than. PSP2000 and PSP1000, be careful not to be JS

Replace it with an inferior screen).

That's about it, that's it! Please accept the landlord!

The symptoms you provide are not too detailed. Probably the motherboard. It could also be an issue with the screen.

It seems to be a motherboard problem, if it's a motherboard, it's high.

Specifically, you should go to the video game store and find the boss to have a look.

Sympathy for you, wishing you a speedy recovery of good health.

1. It does not affect the use, it is not recommended to disassemble, the dust that enters will make you more disappointed, you can wipe some parts with a toothpick against the cloth.

2. If you have to disassemble, please disassemble it in a humid and sealed room, such as in the bathroom where you have just taken a shower, because there will be no dust flying in the air here.

3. If you have to clean it in the store: if he disassembles it in front of you, he is not professional enough, because dust will enter; If he tells you to leave it in the store and pick it up tomorrow, although this is a very professional practice, you have no way to guarantee whether he will replace the internal parts, so there will be risks.

4. Regarding the maintenance of small P from dust, use special bags, PSP hard packs, crystal shells, etc., which can only delay the entry of dust. For absolute cleanliness, play in a dust-free environment.

5. It is originally a consumable, how to use it, there is no need to wrap or anything, it affects the feel and costs money. I never wrap my phone, just change it when I'm bored. I added a crystal armor to my little p, and it looks very good.

Generally speaking, if the dust in the small p does not affect the performance, it is better not to manage it well!

In case of dismantling and then dismantling the fault, it will be broken! If it affects performance, there's no way around it!

It will cost about 40mb to disassemble and clean!

If you want to keep the little P from dust, then LZ just keeps playing with a plastic bag!

Hello, let's explain it separately:

1.The inconsistent colors on the top and bottom of the screen are due to the incomplete signal on the screen, missing a signal in one direction. This may be that the cable is disconnected, the cable connector is loose, or the connection between the cable and the screen is disconnected.

The specific ones can only be disassembled and confirmed one by one. If it is loose, it will be enough to plug it back in. It's more troublesome to disconnect, and you may have to change the cable, or even the screen (if the cable and the screen are one, it seems to be one).

Sometimes the cable is disconnected, and the flying wire can also be connected, but the technical requirements are higher, and the repairer may not be willing to do it.

2.The problem with the keys may be that they are not aligned when they are installed, resulting in a lack of light. Usually the key is not working, and the conductive rubber is aged or defaced. You just dismantled it, maybe the installation wasn't quite right.

As for the interface problem, it should be the sequelae caused by the screen problem, and it may be okay after repairing the screen.

It may be that the contact is poor, first pick up the buckle of the card slot with a Niezi, gently pull out the two rows of wires (one wide and one narrow) behind the LCD screen, wipe it clean with an alcohol cotton and then install it on to start it up.