It was cold in the morning, and the car CD reading disk could not be read

It is recommended to do the following: 1. You can find a new optical drive to read whether the data is normal, if it is normal, it means that your optical drive is faulty. 2. If you can't read it out or can only read some parts, it means that part of the data of the disc has been damaged, it is recommended to copy the disc file to the hard disk, or use the recorder to copy a copy of the disc to see if the data can be read, if not, then there is no way to fix it.

Check if the car stereo recognizes the pattern of the files on the dish. The CD machine of an ordinary car can only **CD disc, and this CD is in CD format. Before burning, it is best to use audio conversion software to convert the audio file to *** and then burn it.

But some car stereos don't have a default *** format. Nero burns from the web in APE format (this audio file is larger) for better results. When burning, use nero, be sure to use 2x or 4x engraving, don't be fast!

It's hard to read. Finally, check the default format of your car stereo first. Then go and engrave the file format you need.

Condensation, that is, there is a thin layer of frost on the disc, which causes the bald head to be unable to read the disc, and it will be fine after the temperature in the car rises.

The ability to read the disc has decreased, so change the bald head or adjust the power. Thank you.

Hello, need to be replaced I hope mine is helpful to you, thank you for your question and good luck!

This should be replaced with a CD.

The solution to the car CD does not read the disc is: 1. Remove dust and dirt, in the process of use, the pressure pulley used by the audio host to read the card belt and the magnetic head of the CD** machine are easy to accumulate dust, especially the laser head of the CD** machine is easy to be damaged, and should be protected; 2. Make sure that the tapes and CDs are clean. The reasons why the car CD cannot be opened to read the disc are:

1. Wrong disc selection: Due to the different disc formats, the CD player cannot recognize VCD discs and *** discs, and if the file discs are selected incorrectly, there will be a phenomenon of not reading the disc or spit out when the disc is loaded; 2. Serious disc scratches: When the disc is seriously scratched, the bald head sensor will not be able to read the digital information correctly, resulting in card discs, non-reading discs and even "crashes"; 3. The bald head is too dirty:

The bald head sensor is an important precision component, and dust is easy to refract light waves or even cover the light wave transmission, resulting in the inability to read information.

Summary. Hello! That is, the probability of the laser head in the CD player being faulty is relatively large.

What's going on with the automatic withdrawal if you don't read the disk.

What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! 【】Sometimes I put the plate in and read the plate.

What's going on with the automatic withdrawal if you don't read the disk.

I know everything.

No problem. What went wrong?

What's going on with the automatic withdrawal if you don't read the disk.

The replacement disc is the same or the return plate.

What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! What's going on with the automatic withdrawal if you don't read the disk.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you! 【】

There are two reasons for this:1. The failure of the vehicle's CD system is caused by a problem with the magnetic head. 2.The problem with the optical drive, because the optical mega delay drive is overworn, and it will not be read after long-term use. With discs, listening, watching, you need to change them regularly.

What other input methods are there for the car machine in addition to reading CDs?

The car can read the U disk, or the mobile hard disk, or the lack of a car to dress up the luggage through the mobile phone Bluetooth connection, can be ****. It's easy to use. Listening to songs in the car while driving long distances can effectively relieve the driver's fatigue and increase the driving safety of the car.

Be sure not to drive tiredly.

Can the vehicle be replaced?

It can be replaced, and it can be completely replaced when the vehicle breaks down or is replaced. The new product is more functional, more convenient to use, can bring better usability, and brings driving safety, especially the language control function.

The original reason for the car CD not reading the disk may be that the disk selection error is slippery, or it may be that the car CD cannot be read normally due to serious scratches on the disk.

Before using a car disc, the first thing to pay attention to is to choose the right disc format. It should be noted that the car CD can only be read by the ruler wax, and there is no way to read the VCD or *** if you put it on the car CD.

**Before CD, it is necessary to check whether the disc is in good condition. If the disc is badly scratched, the pickup sensor of the car's CD cannot read the digital information, so the songs in the CD will not work properly** and may quit early.

If you don't clean the bald head of the car's CD for a long time, it will cause the CD to not be able to read normally, because the bald head sensor is a very delicate part, and there will be dust accumulation after long-term use, and if there is too much dust, it will cover the light wave transmission. In this case, it is recommended to find a professional to clean it.

The CD** machine used in the car is controlled by a digital circuit, that is, a single-chip microcomputer control circuit. If there is a chuck or no discing for a long time, it is likely to be caused by the wrong channel of the CPU control program. The way to deal with this situation is relatively simple, just unplug the negative wire and reinstall it.

Millions of car purchase subsidies.

There are several possibilities for car CDs not to read discs:

1. The disc is selected incorrectly. Due to the different disc formats, the car CD cannot recognize VCD and *** disks, and if the disc is selected incorrectly, there will be a phenomenon of not reading the disc or spit out when the disc is loaded.

2. Serious disc scratches: When the disc is seriously scratched, the bald head sensor will not be able to read the digital information correctly, resulting in card discs, non-reading discs and even "crashes";

3. The car CD bald head is too dirty. The bald head sensor is an important precision component, and the dust is easy to refract the light wave and even cover the light wave transmission, resulting in the inability to read the information and the disc. Because the bald head sensor** is expensive and cannot be repaired, it should be cleaned by a professional maintenance technician using a professional cleaning solution.

4. The car CD has a "crash" problem. Now the car CD is used in digital circuit control, that is, single-chip microcomputer control circuit, if there is often a card disc or do not spit out the phenomenon of the disk, it is easy to cause the CPU control program error, that is, the "crash" phenomenon. The processing is relatively simple, generally you can disconnect the negative pole of the battery for more than 15 seconds or press the reset on the car CD (mostly hidden buttons) to return to normal.

The cause of the failure may be something else, and all kinds of well-known solutions have not worked. In this case, we can only seek professional help.

Car *** or CD always does not read the disc or fails to read the disc, which may be caused by these reasons.