How to make your own car CD? How to convert the dismantled CD of the car into a home

There are two kinds of car CDs I don't know which one yours One is able to recognize *** format** file If it is this kind of car CD, it is better You can find a blank CD and directly engrave ** into the general CD capacity is 700MB It is recommended not to engrave it full Keep it at 650MB Generally you can save 100 to 200 songs** If your CD player is not able to recognize ***** then it is recommended that you burn it with Nero's software Generally, Nero can directly generate CD format** As long as you find the corresponding *** file before, there is an option to burn** After choosing, you can directly choose to burn** disc So that you can add your *** file according to the steps Generally, the total length should not exceed 70 minutes Finally, choose to burn You can make a **CD If you don't understand anything, you can leave a message It is generally recommended to use nero7 It is easier to use.

Generally, if you don't pursue sound quality, you can use the burning function of the built-in ** device in Windows. There are some requirements for sound quality, and your system is pre-installed with a lot of software, click ones in the builder tool, click on "audio CD". If you are more demanding in the pursuit of sound quality, go to the Internet ** a nero, and then burn it into an audio CD, if the CD on your car recognizes *** CD, then click on the "data CD".

Use Nero, select CD, **CD to make it, and then just put those *** into it, FLAC is of course better. But that's based on time, not the capacity of your disc. A CD can only hold about 75 minutes of songs, which is about 15 songs.

It's very simple, let me tell you the next steps:

2.Collect all your favorite songs into one folder, and in order not to waste them, choose as many songs as possible according to the capacity of the disc, because you can't burn them repeatedly.

3.According to Nero6's prompt, burn the record, put the song in it and you're good to go

Absolutely, find an inverter, (the kind sold in computer accessories stores, the kind used for monitoring) 12V 2A. as a power source. Then take 2 horns. Done

12V power supply on the line, computer power supply on the line, I took it, there is no problem at all, but if it is not good, there will be AC interference sound, if there is a grounding wire.

I'll rub and I'll ask you Although it can't help you, you can communicate together when the time comes.

The whole process is meticulous and complex, and every link must be paid attention to to avoid mistakes.

Here's how:

1. The voltage of the on-board CD is generally 12V, and the current is about 10 to 15A.

2. Equipped with a 12V DC current, so that the output effective current is more than 10A.

3. The output interface behind the CD player is connected according to the general audio terminology.

4. Use a transformer of about 150W for rectification filtering and power supply.

1. The car CD is 12V DC power supply, and a 220V AC to 12V DC stabilized power supply is needed at home, with a current of more than 3A.

2. The car CD is a multi-functional combination of CD + radio + power amplifier. So with the power supply, there is a lack of speakers, and it depends on how many channels this car cd supports, especially the low-end one that only supports two speakers.

3. The speaker should be bought with 4 ohms, which is the most common horn impedance of car audio, of course, the 6 ohm and 8 ohm horns can also sound, but the sound is not good, and it is easy to burn the machine.

4. There is a complex socket behind the general car audio, there is no corresponding plug, it is very difficult to connect the power supply, speaker output, etc., it is recommended to buy a corresponding socket according to the model of this audio, and then it is much more convenient to wiring.

5. There is a sticker on the fuselage with a wiring diagram on it. +B and ACC are the positive poles of the power supply, and the negative poles are marked by GND. Then there are four sets of speakers, and other lines are not left to worry about at home.

First of all, you have to see that there is a sticker on the body. There is a wiring diagram on it. +b and acc are the positive poles of the power supply. The sign of the negative pole is GND. Then there are four sets of horns. lr lf rf rr (plus or minus) other lines, you don't care about it at home.

This is the wiring. You can find someone who repairs electrical appliances. Let him solder the 11 wires for you.

Then you have to prepare a DC 12 volt power supply. It is best to use a current of 3 amps or more. This works stably.

Speakers: You can find a small speaker for the computer. Or find a few other speakers yourself. Household words. It would be nice to have 2 speakers. Be careful not to use a simple horn. It is best to match it with a speaker. This works well.

v3 Lingyue: I checked. The power amplifier is about 30 watts. It is best not to exceed 40 watts of power from the speaker speaker. (The output of a single channel is 30 watts, this machine is 4 channels).

And then there's the little accessories. Like a radio antenna or something. If you can't find it, find a wire and put it in the socket core of the antenna and pull it out about 1 meter. Then the antenna should preferably stick out of the window. This allows for better signal reception.

If you know a master carpenter, you can make a whole box. Then put the CD player, the speaker. The power supply is all put together. Beautiful and good-looking.

If you want to horn to connect the sound, you want a 12V power supply, it's good, hehe.

You can use it in a DVD player or computer.

The on-board CD only needs to open the co-pilot's glove box, but only if the vehicle is powered on. Press the CD eject button first, then place the CD into the CD slot, and finally gently push it with your hand. When it is pushed to a certain extent, it inhales on its own. You can **cd the content.

Discs are made of an optical plastic called polycarbonate. Polycarbonate is the main raw material of cadmium, which contains a large amount of bisphenol A and benzene. When the temperature in the car is higher than 60, these two substances can easily diffuse into the air, causing great pollution of the air in the car.

Users should keep their hands clean when picking up the disc to avoid contamination of the surface of the disc with grease and secretions. If the CD head reads the world hungry for contaminated surfaces, it will affect the sound quality. When wiping dust off the surface of the disc, wipe it along the vertical direction of the track.

Wiping along the track can damage the disc. Dust is the main killer of the signal laser head of the CD machine. When the laser head is covered with dust, the light transmittance of the laser head will be greatly reduced, so that the reading effect will be worse, and the speed will not be able to keep up, resulting in failure.

Therefore, in use, try to avoid dust entering the cd**. When driving on rough roads, it is best not to use a cd**. If there is a problem with the chuck, do not do it yourself without absolute certainty, so as not to expand the scope of failure.

Millions of car purchase subsidies.

How do I put a CD in my car? All you need to do is open the co-pilot's glove box and put it in the long strip-shaped reading area. Use and maintenance of car CD player:

1. Genuine CD should be used as much as possible: because the copy CD disk is poor in the production process, the product often has uneven disc surface and uneven pitting etching, and these hidden dangers will cause the reading speed of the bald head to not keep up with the jump point, so that the sound is intermittent, and the bald head will be damaged for a long time. 2. The user's hands should be clean when taking the CD

Prevent oil stains and secretions from your hands from contaminating the disc, and the bald head will affect the sound quality when you read the contaminated disc. When wiping the dust on the disc surface, wipe it along the perpendicular direction to the trajectory, and wiping along the trajectory will damage the disc. Dust is the main killer of the laser head of the CD machine, when the laser head is covered with dust, the light transmittance of the light head will be greatly reduced, so that the reading effect will be worse, and the speed can not keep up and cause failure, so try to avoid dust entering the CD machine in use.

When driving on heavily bumpy roads, it is best not to use a CD player. If a chuck malfunction occurs, do not do it yourself without absolute certainty to avoid the expansion of the malfunction. 3. Failures of different degrees:

Due to the harsh environment of the car, such as dust, vibration, large temperature difference, etc., the CD player will have different degrees of failure. The most common is that the laser head is dirty, generally dust, and the treatment method is to spray it with a spray ball.

At present, the best cleaning discs on the market can only be cleaned slightly, which cannot completely solve the problem. If the laser head is contaminated with moisture, it should be cleaned with a detergent. Long-term use of mechanical parts, but also clean and lubricate treatment, due to the complex structure of the car CD machine disassembly and assembly, so it is best to find a professional maintenance department to clean up, to avoid bad failures.