-
Burning, in fact, is a measure to quickly stabilize the aging of equipment. Some components such as transistors, integrated circuits, and capacitors are unstable when they are brand new, and they can gradually stabilize after a period of use. For the earphones, the burn-in is actually in the diaphragm folding ring, the new earphone diaphragm folding ring mechanical compliance is poor, resulting in a relatively large distortion, after a period of use, the compliance gradually improves, and the distortion will gradually drop to a normal level.
In order to make the headphones play the best sound effect in a short time, a set of effective burn-in methods are customized according to their own characteristics:
Step 2: Choose your favorite songs, listen to the songs normally at the volume that suits you, cycle **36 hours, adjust the volume to about 2 3 of the maximum volume, and the sound quality of the headphones will gradually stabilize.
It should be noted that the sound should not be turned on to the maximum at the beginning).
-
The sound system of the dynamic headphones is driven by the voice coil, and the diaphragm is fixed on the shelf of the earphones, theoretically speaking, the diaphragm movement should be a piston (vertical) movement, which requires the edge of the diaphragm to have a larger compliance, the pot is the pot here, the edge of the diaphragm of the new earphone is relatively tight, the elasticity is large and the compliance is small, the earphone is to let its edge move, the sound is not so tight.
The burn-in depends on what kind of headphones you are, the headphones must be more than 1000 yuan before it is necessary to burn the machine, there is no need for the following, the easiest thing to burn is to listen to Cai Qin's ferry in a loop, in**a radio white frequency, loop**can, remember not to be too loud!
-
Just as a new car needs to be run-in, new headphones also need to be cooked. The generally applicable method of praising headphones is "gradual", at first use a softer **, let the headphones soothe for 10-30 hours at a lower volume, and then use ordinary ** (except rock and dance music) to praise 100-200 hours at medium volume;
If you listen to the treble at this time, it becomes mellow and natural, the midrange is warm and friendly, and the low frequencies are no longer a mixed rumble, but full of details, then you can do it, and you must not rush to the moment.
Here's how to burn the machine:
1.Use a softer ** (white noise, red noise is recommended), let the headphones soothe for 10-30 hours at a lower volume, take a group of four hours, and stop for about ten minutes before cooking.
2.Use ordinary ** (except rock and dance music) to boil for 100-200 hours at medium volume, four hours as a group, and stop for about ten minutes before boiling.
3.It should be noted that it cannot be boiled continuously for a long time, and the burn-in machine pays attention to "asymptosis".
4.In fact, it's just like when you usually listen to **. Although it will be slower, the sound quality will gradually improve.
I have to say that this is a game with almost no strategy, and in the shore of the land, only the alliance established by a few local tyrants will not be reduced. As the game progresses, the fun of opening up the wasteland computer is gone, and all that remains is to be called around by the top brass of the alliance, calling you to participate in the siege today, and then saying that the mission has changed, and going to a certain place to garrison. Civilian players have little fun at all, and being a little brother in reality is also a little brother in the game. >>>More
1. The antivirus software is installed more, and all the monitoring is turned on, less monitoring is turned on or not monitored, and the virus is often checked and killed. >>>More
Song Jiang is inside the Water Margin.
There are several reasons for the problem of computer noise. 1. CPU fan. In this regard, you can unplug the power supply of the CPU fan before turning it on and listening. >>>More
In summer, eggs are easy to disperse when they are placed outside for a period of time, because the temperature is high in summer, and the diffusion of egg whites and egg yolks is intensified, so that the gas in the egg yolk continues to diffuse to both sides, resulting in the separation of egg yolks and egg whites, and the phenomenon of egg yolks scattering. At the same time, the higher temperature in summer will also make the mucin in the egg white thin under the action of protease, losing the role of fixing the egg yolk, causing the egg yolk to fall apart. In order to prevent this from happening, you can put the egg with the big head down, so that the air chamber inside supports the yolk and prevents it from being close to the eggshell, so as to avoid the egg being left outside for too long in summer and causing the yolk to fall apart.