When I turn on the phone, I need to enter my username and password, because I am at home, so I don t

Generally, in the control panel - user account - remove the password can be, you can also: click "start running", enter "rundll32, usersrundll", press the enter key and then pop up the "user account" window, see clearly, this can be different from the "user account" panel window opened in the "control panel"! Then uncheck the "To use the machine, the user must enter a username and password" option, click OK, and enter the account and password you want the computer to automatically log in to each time in the pop-up dialog box.

You try this.。。

My Computer", right-click, and perform "Administration".

1。Double-click Local Users and Groups, and then click Users

2。Right-click on the account name and perform the 'Properties' function.

3。General, select Account deactivated, and then click OK.

After all accounts except the user are deactivated, the user password needs to be set to blank to enable active-only login. However, due to the forced password change function in computer management, it may make the user's encrypted files unreadable, so we use the "User Account" function in the control panel instead to change the password safely!

1。My Computer, Control Panel, click "User Account", go to the account settings of the user itself, and set the user's password.

2。Click Computer Administrator, and then click Change My Password

Go to the user's password settings to change the user's password field to blank. The user's password field is left blank and can be automatically logged in to Windows when the computer is turned on).

3。Enter the current password, do not set the new password or confirm password, and click Change Password

Is it a boot password or a login password?

If it's a boot password, you can open the case, take out the battery on the motherboard, and install it again!

If it's a login password, set it up in the user!

In the Control Panel - User Accounts - Your Account, change the password, and put the new password directly enter.

You can change it through the registry, but if you don't know it well, don't change it.

You can install an optimizer and use it to start the automatic login system of your computer.

Follow my method to delete the user you created! Just one administrator user that comes with the system (set its password to no password) is enough! ~~

I haven't tried the one of the optimizer, but I use a superusername, which doesn't require a password, and the username is administrator

Here's how:

2.In the dialog box that pops up, enter "netplwiz" into the program and click the OK button.

3.In the dialog box that appears, uncheck "To use this computer, users must enter a username and password", click the user name, and then click the OK button.

4.Enter the confirmation password for the new password for automatic login in the pop-up dialog box, and then click the OK button. The next time you log in, you won't have to enter your password.

Method 1: Right-click on "My Computer" - Manage - Local Users and Groups - Users - Find your username in the border on the right - Right-click and select "Set Password" - no need to fill in, you can cancel the boot password directly!

Method 2: Program - Control Panel - Find the user you want to cancel the password - select Change Password - after entering your current password, the new password is empty, and you can cancel the password directly!!

Hope it helps.

The steps to cancel the login on the computer are as follows:

1.Find your computer's control panel and left-click to open it, 2On the control panel, left-click "Change Account Type" under User Accounts

3.Enter the operation interface, click the account you want to change with the left mouse button, 4Go to the interface of changing your account and click "Change Password" on the left

5.In the change password interface, you need to enter the current password and the new password as well as a password prompt, the following are the key steps;

6.Note,Since it is to cancel the login password,Let the next boot directly enter,No need to enter the password,So you only need to enter the current password,Don't set a new password,7.After entering, click "Change Password" in the lower right corner to cancel the boot password

Here are two ways to do this:

Method 1: Right-click on "My Computer" - Manage - Local Users and Groups - Users - Find your username in the border on the right - Right-click and select "Set Password" - no need to fill in, you can cancel the boot password directly!

Method 2: Program - Control Panel - Find the user you want to cancel the password - select Change Password - after entering your current password, the new password is empty, and you can cancel the password directly!!

Right-click Computers > Administration, double-click Local Users & Groups > Users

Disable Accounts Not Required.

Login without password:

Start Menu -"Run"Enter control userpasswords2 to remove"To use the machine, the user must enter a username and password"Small hook.

Then enter the current administrator's boot password that you set when you installed your device.

Confirm the exit, three steps, OK

Click "Run" in the start menu, enter "rundll32 ,usersrundll", press enter --- pop up the "User Account" window,-- unselect the "To use this machine, the user must enter the username and password" option--- OK, enter the account and password you want the computer to log in automatically every time in the pop-up dialog box. If you don't have a password, you don't need to enter the password.

1. Start menu, select Run in the pop-up menu.

2. In the run dialog box, type: netplwiz, and then click OK.

3. After clicking, you can see that "To use this computer, the user must enter the user name and password" is checked in the user account dialog box.

4. Remove the tick in front of "To use this computer, the user must enter the user name and password" in the user account dialog box, and then click Apply.

5. After clicking Apply, the automatic login dialog box will pop up to verify the permission, enter the username and password and click OK, and you will not need the password when you log in next time.

To unturn on the computer, you need to enter the user account and password

1.Under the Start menu, open the Control Panel;

2.Find and go to "User Account";

3.Click "Delete Password", enter the original password, and click "Confirm".

4.On the user account home page, select "Change how you log in or log out";

5.Just remove the tick in front of "Use the welcome screen".

How to type a computer with a password Are you worried that your family is worried about your eye health or your grades are declining and you lock the computer with a password? I recommend you 3 ways to open the computer locked with a password: 1. Press F11 to restore it with one key when you turn it on, and the password will be gone after recovery (unless it is backed up with a password), and you can enter it directly.

Disadvantages: easy for others to find, and all the things in the C disk are restored to the same as when they were backed up (usually nothing, the other disks remain the same, only the application software installed during the backup,), the recovery time is long, if the C disk has any important files (for example: design drawings), hehe, that's terrible!

2. After booting up, keep pressing F8 until you see "Safe Mode with Network Connection", then use the Enter key to select and enter the "Safe Mode with Network Connection", and then use the Enter key to select the system you want to enter. Enter a called"administrator"system, it will go directly, then right-click "My Computer", enter "Explorer", then enter "Control Panel" on the left, then enter "User Account", see your user name (for example: hot), click your user name, and then find "Delete User Password", click on it, it will delete the password that has been set, restart at this time, you can directly enter the user system.

Disadvantages: easy for others to find, troublesome operation, and long time. 3. The best way is to turn on the computer, let it enter, and enter the password interface, and press "Ctrl" and "Al T" and the keypad at the same time

del)" appears a login dialog, enter admi nistrator in the user name, hit the enter key, and enter the user system (it takes a little more time to enter the first time), after entering you can set up the system according to your hobby (create a new shortcut), and you can operate. (I suggest you go to Set a password, this user originally did not have a password) Advantages: Quick access, operable (the application software in safe mode is not operable (for example:

q q)), will not be discovered by the family, the logged user will disappear, and you have to re-enter when you enter. (Special note: remember the username administrator, of course, if it's too long, you can change it, but be sure to remember the username and password!!

Disadvantages: Some people log in directly when a login dialog box appears, if you use this method, you will leave a username (can not be revoked, unless someone else enters the system that has locked the password), easy for others to find. The above methods, are tested by me, are feasible, the system is Windows XP, this article is written by me, if there is any shortage, please advise.

Special attention! The above methods should be preconceived, that is, after entering the password to change, if someone is better than you, preconceived, hehe, you can find another way. Add more points, haha gfhfht

In Windows XP, click Start Run

Input. rundll32, usersrundll or control userpasswords2 (note the case and spaces), and then enter the "User Account" operation window.

Or go to the user account management interface from the control panel.

Deselect the item "To use the machine, the user must enter a user name and password".

In the dialog box that pops up, enter the username and password of the account you want your computer to log in automatically each time.

How you haven't set the boot password, just directly in the administrator click OK, administrator account, if your guest account is not closed, you can also enter through guest. If you have set a password and you forget it, you can only go in and unlock it through DOS. Or simply reinstall the system.

That's all I know, and I hope you can get it done.

If you know the old password, open My Computer - Control Panel - User Account - Change Password - Enter the old password - Don't fill in the new password, OK.

If you don't know the old password, you can only find a system disk.,Start from the CD.,There's a clear windows password in it.。

Control Panel - User Account Management - Delete Account. That's how it should be. There are a few options inside the user control for you to take a look at. There are created, changed, and canceled.

The steps to cancel the computer boot username and password are as follows:

1. Under the Start menu, open the "Control Panel".

2. Enter "User Account";

3. Click "Delete Password", enter the original password, and click "Confirm";

4. On the home page of the user account, select "Change the way to log in or log out";

5. Remove the tick in front of "Use the Welcome Screen".

It's pretty simple! Directly in the group policy to set the boot to remove the login interface on the line, it's very simple, in the "run" input command "enter the policy", specifically find it slowly, easy to find, in the "security settings" in the user configuration management, just look for it later.

Control Panel - User - Change Password - Delete Password.

The XP system solution is as follows:

Click Start to run, type in "rundll32, usersrundll" (note the case and spaces), and then go to the "User Accounts" action window, note that this is different from the "User Accounts" panel window that opens in the "Control Panel"!

Remove the tick to the left of "To use the machine, the user must enter the user name and password"; Next, press the "Apply" button, and then a dialog box will pop up, enter the account name and password that will automatically log in to the computer every time in the future, and press "OK" to finish.

Start -—— Settings - Control Panel - User Account - Change Password (Enter the previous password, the new password will not be lost) - OK.

You need to go to the control panel of your computer and find the settings in your user account in the control panel!