How do I take the elevator? How do I get on the elevator????

The key points of taking the elevator:

1. Get in and out quickly. Especially when the door is closed immediately, don't squeeze in with your body, block the door with your hands, there is either an infrared or mechanical device inside the door (the visible part of the mechanical device is generally an aluminum profile, press this thing into it by hand), and the door will open automatically, but the movement of the hand should be fast, and it will come back soon, in case these things fail, there will be no problem. There is also a simple way to press the button outside the door, and the door will be opened, but when the door is closed to a very small time, it is not applicable.

2. Don't panic when you are locked in the elevator. Clause.

First, it is stuffy, and there are gaps in the car of the elevator and fan holes on it. Clause.

Second, what happens, the elevator can't move, don't go to open the door, try to climb out, this time is the most dangerous, especially when the power goes out, in case the electricity comes at this time, the elevator starts automatically, that does not flatten people, at this time you shout, knock on the door, as long as the people outside know, and then find a professional person to rescue it, of course, the best way is to play**, generally speaking, the elevator has a fixed inner line ** to the monitoring room; There is also a mobile phone, which depends on the local signal at the time, but you can give it a try.

Clause. 3. Don't worry about the elevator will fall down at this time, the elevator itself is designed with a safety device, when the speed exceeds a certain percentage, it will move and brake the elevator, even if the wire rope of the elevator is broken, this device will also act. Of course, people will feel uncomfortable with this action, but it is always safe.

This device should also be careful, especially for small children, if it jumps in the elevator, it may trigger the device to move. `

1. First of all, open the door of the elevator. The elevator doors on different floors can be operated according to the instructions of the arrows. The first floor [ is up and down respectively, press the button [ ] The elevator door will automatically open.

The middle layer has the meaning of [ or [ up and down, respectively. Press the button and you're good to go. At the top level, you can press the [ ] button directly.

It should be noted that you can only press the indicator light to turn on, and you don't need to hold it down and not let go.

2 Second, walk in quickly.

The elevator doors will close automatically.

3 Then follow the operation button of the elevator.

When you press the button, the light will light up and you will be able to reach the floor you are going to.

4After arriving at the floor, the elevator door will automatically open, and you can go where you want to go when you go out.

1. Press the floor, before entering the elevator, don't rush in, first observe whether the door is open normally, if there is a jam, you have to be careful. Don't bury your head and want to get in, and then observe whether the elevator has come to this floor, many people who have not observed just don't see clearly, step on the air, and see the elevator stop steadily and then enter.

2. It is best not to lean on the elevator door in the elevator, because once the danger appears, the door is the most dangerous area, and it is best to stand on the side of the elevator. If there is a handrail in the elevator, you should hold on to the handrail, because if the elevator fails, there is something to hold on to avoid falling and hurting.

3. If the elevator fails, everyone should keep calm, don't panic, you can use the elevator intercom equipment for help, and wait patiently for rescuers.

Extended information: Passenger elevators, elevators designed to transport passengers, require perfect safety facilities and certain car interior decoration.

Freight elevators, which are primarily designed to transport goods, are usually accompanied by people.

Medical elevator, designed for transporting hospital beds, stretchers, and medical vehicles, the car has the characteristics of long and narrow.

Sundries elevators, elevators designed for libraries, office buildings, restaurants, etc. to transport books, documents, food, etc.

Sightseeing elevator, the car wall is transparent, and the elevator is used for sightseeing by passengers.

Vehicle elevators, which are used as elevators for the shipment of vehicles.

Ship elevators, elevators used on ships.

Building construction elevators, elevators for building construction and maintenance.

Other types of elevators, in addition to the above-mentioned commonly used elevators, there are also some special-purpose elevators, such as cold storage elevators, explosion-proof elevators, mine elevators, power station elevators, firefighter elevators, inclined elevators, nuclear island elevators, etc.

Press the triangular button on the side of the elevator door, there is a " " This means going upstairs, and the other triangular arrow pointing down means going downstairs.

Once inside, there is a number on the right side of the door, and you can press the floor if you want to go to. After pressing the corresponding key, the light will turn on. The door will show you which floor you are on, and when you get to your floor, you will stand by the door and wait for the door to open before you can go out.

In addition, there is "||".It means to close the door.

> means to open the door. The red button of a bell is generally an alarm, don't press it casually unless you are in danger.

Extended Information: Simple to use (there are solutions below for emergencies):

Man-carrying elevators are intelligent and automated equipment controlled by microcomputers, which do not require special personnel to operate and drive, and ordinary passengers only need to take and operate the elevator according to the following procedures.

At the entrance of the elevator on the elevator floor, press the up or down arrow button according to your own needs to go up or down, as long as the light on the button is on, it means that your call has been recorded, just wait for the elevator to arrive.

After the elevator arrives and opens the door, let the people in the car get out of the elevator first, and then the caller enters the elevator car. After entering the car, press the corresponding number button on the control panel in the car according to the floor you need to reach. Similarly, as long as the button is on, your selection has been recorded; At this point, you don't need to do anything else, just wait for the elevator to stop at your destination.

The elevator will automatically open when it reaches your destination floor, and you will end the process of getting out of the elevator in order.

Once in the elevator, lean your back against the wall, don't stretch your legs too straight, and don't stand in the middle.

2.The elevator door opens, enter the elevator, select the floor you want to go to, such as the first floor, and click "1" to press ">|".the meaning of closing);

3.The screen in the elevator shows the floor it is currently on;

4.After reaching the designated floor, the elevator doors will automatically open and you can just step out of the elevator.

How to take the elevator:

1. Elevators.

Press the arrow keys up and down the arrow keys down. Once inside, press the floor button you want to go to. The elevator has a car that runs between at least two columns of rigid guide rails that are vertical or have an inclination angle of less than 15°.

2. Escalators. Stand on the side of the escalator, do not walk or run at will, just hold the handrail firmly. A stationary electric drive device used to transport passengers at an upward or downward incline between different floors of a building.

Elevator Safety Matters:

1. The elevator can not be overloaded, when the elevator alarms, it should take the initiative to exit, wait for the next trip and then take it, the elevator overload is very dangerous.

2. When the elevator door is about to close, do not force the elevator to rush into the elevator, prevent the elevator from closing, and do not stay with one foot in the house, which will be harmed. When the elevator door is about to close, it is strictly forbidden to reach through the door gap to try to reopen the elevator. Keep your distance from the elevator doors, and take special care to prevent clothing or other personal belongings from getting caught in the elevator doors when opening and closing the doors.

3. When the elevator is operating normally, do not press the emergency button, otherwise it will bring you unnecessary trouble. If you need the elevator door to remain open, you should press and hold the door open button, and if you need to carry items, you can ask other passengers to help you press and hold the door open button. Fourth, when taking the elevator, if the elevator door is not closed and runs, it means that the elevator is faulty, and passengers should not take the child, and report to the maintenance personnel at the same time.

Find the location of the elevator entrance first. The elevator entrance in the same city is near the staircase, and the elevator entrance of some large office buildings, hotels and shopping malls is on the lobby side. Then press the button on the side wall of the elevator entrance.

If you want to go upstairs press the up button, go downstairs press the down button. When you press the button, the button will light up, and you can wait for the elevator door to open. Finally, after entering the elevator, press the number button in the elevator, and press the number on the floor, and the number will light up after pressing the button.

After reaching the designated floor, the elevator door will automatically open, just walk out of the elevator door. <

1. Find the location of the elevator entrance first. The elevator entrance in the same city is near the staircase, and the elevator entrance of some large office buildings, hotels and shopping malls is on the lobby side.

2. Then press the button on the side wall of the elevator entrance. If you want to go upstairs press the up button, go downstairs press the down button. When you press the button, the button will light up, and you can wait for the elevator door to open. The display at the button allows you to observe how many floors the elevator has reached.

3. After finally entering the elevator, press the number button in the elevator, and press the number button on the floor, and the number will light up after pressing the button. The elevator doors will automatically close after entering the elevator for a certain period of time. If there is no one entering the elevator and the elevator door does not close automatically, you can press the close elevator door button to close the elevator manually.

After reaching the designated floor, the elevator door will automatically open, and the elevator door will be completed when you walk out of the elevator door.

Generally, the elevators I see are inclined elevators and passenger elevators, the inclined elevator is very simple, just stand up directly, just pay attention to not standing on the yellow line when standing, and the passenger elevator is as follows:

1. On the outside of the elevator, we can see that there are two arrows up (representing going upstairs) and down (representing going down), as well as a display screen (showing the current operating status, such as an upward arrow and the number 5, indicating that the elevator is in a state of rising to the 5th floor).

2. According to your own needs, press the up arrow or down arrow, which is the arrow of the elevator to brighten, indicating that the elevator has received instructions, and later to reach the floor where you are, this is what you need to wait for the elevator to arrive.

3. When the elevator arrives at the location of the floor you are in, the elevator door will automatically open, and you can walk directly into the elevator.

4. The number button represents the floor you want to go to, some buildings have a basement, and the basement is generally represented by a B+ number, such as B1 represents a basement. Press the floor you want to go to, and the button indicator light will be on, indicating that the elevator has received instructions, and then wait for the elevator to arrive at the floor you want to go to.

5. Above the inner department of the elevator, there is a display of the elevator running status of the oak shouting screen, and the display screen outside the elevator is the same, pay attention to the elevator to reach that floor, don't do it.

Press the triangle button next to the elevator door and the elevator landing door will open. After entering the car (inside the door), press the corresponding number of the floor you want to go to, and then press the button with two triangles and opposite corners, and the landing door will close. Then when you get to the floor you want to go to, the door will open automatically, and you can go out.

During the closing of the elevator, if the car door touches a person or object, the door will automatically reopen without hurting people. Because there is an anti-pinch switch on the famous collapse door, once the door touches people or things, this switch action makes the elevator unable to close the door, and reopen, and then close the door again. In addition, the closing force is regulated, and it will not reach the level of hurting.

When the door closes to the end, the void will not open it again.