How to improve the working effect of the ultrasonic cleaner?

1.Put the cleaning objects gently into the cleaning basket of the ultrasonic cleaner, and then put the cleaning basket into the cleaning tank of the ultrasonic cleaning machine, and the objects cannot be put into the cleaning tank immediately to prevent the destruction of the machine and equipment and the actual effect of cleaning. 2.

According to different commodities or the actual effect of cleaning, pour cleaning liquid, water or cleaning organic solvent according to the proportion, and the water level in the ultrasonic cleaning machine shall not be less than a certain part. 3.The ultrasonic cleaner is connected to the switching power supply to ensure that the switching power supply is connected.

4.Turn on the ultrasonic cleaner button switch, and it shows that everything is working normally for the ultrasonic cleaner.

Your inner groove size area does not match your power, and the number of ultrasonic vibrators is generally determined according to the size of the inner groove. The normal situation is that every 10,000 square millimeters is equipped with one vibrating head, then your size is actually only 30 vibrating heads, and the power of the vibrating head is 50W, and 30 is the total power of 1500W. And your 2000w is to 40 vibrating heads (40 vibrating heads is unscientific, the number of vibrating heads of the general ultrasonic cleaning machine is best to be a multiple of 6, so that the arrangement can make the ultrasonic effect achieve the best).

Suggestion: You have to make your own ultrasonic cleaner to give you these suggestions.

1. The installation of the vibrating head must be reasonably distributed.

2. The debugging of the generator is very important, the frequency of ultrasonic waves must be experimented to determine how many frequencies can make your cleaning effect the best, different cleaning items are suitable for different frequency ranges.

3. The height of the tank should be selected appropriately, too high and too low will have a great impact on the cleaning effect.

2000w power to 40 vibrators, according to your inner groove size area, 36 is enough, in addition you did not say what the frequency is, the ultrasonic frequency should be determined according to your cleaning object, the vibrator and circuit board are simpler, there are sold on the market, but there is a certain degree of difficulty in assembly and debugging, you must have professional knowledge, you want this configuration can be bought for thousands of dollars on the market, Fujiayi ultrasound specializes in providing ultrasonic accessories and consumables, you can ask, 0755-6112 0139

It's a difficult question! I'm not an expert!

Human time and energy are limited, and if you waste time and are bored together, you will naturally have no time to make yourself better.

Appropriate temperature, with appropriate cleaning agent.

1. Set reasonable working parameters.

The ultrasonic cleaner needs to set the parameters of frequency, power, temperature and time before working, and these parameters are set to an adjustable state because they can affect the final cleaning effect. As for the exact setting, it needs to be decided according to the object to be cleaned and the main stain.

2. Use the equipment correctly and standardly according to the instructions.

The precautions for using the equipment in the manual must be focused on, which not only affects the warranty, but also affects the life of the equipment and the cleaning effect.

It is forbidden to block the vents on the side of the device. The purpose of the vent is to remove the heat generated when the circuit is working. If it is blocked, the device will stop running due to overheating, which will lead to damage to the line in severe cases.

The items or containers to be washed cannot be placed directly at the bottom of the cleaning tank, and the items can be suspended with a metal basket. If the object to be cleaned is placed at the bottom of the cleaning tank, it will reduce the service life of the oscillator, and in addition to this, it will also affect the cleaning effect.

3. Do the maintenance of the old equipment.

Mechanical equipment has a service life, and a machine that has been used for a few years is definitely not as functional as a newly bought machine. In order to ensure that the equipment is in a good condition, maintenance work is necessary.

Because the ultrasonic cleaner will use liquids during work, it is necessary to ensure that the equipment is clean and dry after the work is completed, especially at the inlet and drain that are easy to be overlooked. Of course, it is not possible to use it for a long time. Therefore, even if the device is not used for a long time, it needs to be taken out and run every once in a while.

Jiangsu Jiujiu Jiayi Ultrasonic Technology **** will answer for you: the automatic super god wave cleaning machine is widely used by all walks of life No matter which industry you are engaged in, you need to use personnel for training and mastering its various functions proficiently in order to operate smoothly.

Before use, it is necessary to carefully observe whether the indicator light, switch and other prompts of the ultrasonic cleaner are normal, especially in terms of power supply, if the voltage is unstable, the whole machine can be destroyed directly, and it must be carefully checked to see if there is any leakage and other potential safety hazards.

After all the inspections are done, you can pour in the cleaning solution, gently put the items that need to be cleaned into the washing tank, set the temperature and time according to the instructions, and clean after the parameters are set.

Finally, gently put the cleaned items on the turnover tray, after the cleaning work is over, it is necessary to clean the automatic ultrasonic cleaner in time, cut off the power supply, and put the product back to the original position to avoid collision.

Jiangsu Jiujiu Jiayi Ultrasonic Technology **** answers for you: ultrasonic cleaning machine has the advantage of good cleaning effect and wide range of applications, so it is welcomed by many enterprises, but when using automatic ultrasonic cleaning machine, you also need to do daily maintenance work, so, how should you do it?

1. Make sure the power supply is used.

When using the automatic ultrasonic cleaning machine, it is necessary to ensure the correct use of the power supply, and choose the power cord and power supply that meet the specifications of the equipment.

3. Add enough cleaning solution.

Since the ultrasonic cleaner needs to add enough cleaning liquid when cleaning, if the cleaning liquid is insufficient, the cleaning equipment will be damaged.

Through the above introduction, I believe that you have an understanding of the daily maintenance of the automatic ultrasonic cleaning machine, and if you want to improve the cleaning efficiency, you must do a good job in daily maintenance.

Clean the ultrasonic cleaning tank first.

Put an appropriate amount of cleaning solution in the ultrasonic cleaning tank.

Place the parts to be cleaned in a basket in the cleaning tank.

The 50Hz commonly used electricity is converted into ultrasonic electrical energy, transmitted to the transducer, and then the ultrasonic transducer converts the high-frequency electrical energy into ultrasonic vibration, which is radiated to the cleaning solution for cleaning.

Remove the parts that have been cleaned.