Where is the lathe good? Thanks, what is the lathe for?

The lathes produced by Shenyang Machine Tool Factory can be said to be the best in China at present, if you need products from Shenyang Machine Tool Factory, you can directly contact the sales office of Shenyang Machine Tool Factory 024 ---25655681

Domestic stuff is honest! Not really!! Easy to use and durable, or imported!!

In general, it is good to buy a model machine, and the absolute configuration is high and not expensive! Basically, the bed that was issued at the beginning is easy to use, and the later ones are not easy to use!! I feel that the Siemens system of Shenyang Machine Tool is not bad, it is very capable of working and fast!!

CNC lathes are more difficult to learn, CNC programming apprentices generally have a foundation of three months, if the enterprise needs half a year, depending on the ability of personal comprehension. CNC programming is the main content of the preparation stage of CNC machining, there are two methods of manual programming and automatic programming, it is the whole process from the part drawing to obtaining the CNC machining program.

The prospect and future of the CNC profession.

1. Large and medium-sized state-owned enterprises, especially military enterprises with good economic benefits and manufacturing enterprises with serious national equipment. The military manufacturing industry is the main application object of CNC technology in China. There is a lot of room for CNC employment.

Most provincial and municipal power generation equipment factories cannot recruit CNC technicians with a monthly salary of 6,000 yuan.

2. With the rapid development of the private economy, China's coastal economic prosperity areas (such as Guangdong, Zhejiang, Jiangsu, Shandong), CNC employment talents are in short supply, mainly concentrated in mold manufacturing enterprises and auto parts manufacturing enterprises. The annual salary of a mold technician with CNC knowledge has reached 300,000 yuan, surpassing the "doctor".

3. The size of the demand for CNC technical talents and the type, level and quality of talent demand depend on the degree and level of development of the national economy and manufacturing industry, as well as the management requirements and development trends of the employer itself. According to statistics, CNC machine tools in Germany, the United States, Japan and other countries with more developed manufacturing industries account for more than 70% of the production equipment.

4, China's manufacturing industry and the international advanced industrial countries there is a big gap, according to the machinery association statistics, China's manufacturing CNC machine tools have less than 2% of the total, and in recent years are growing at a rate of more than 35%, for China's existing limited number of CNC machine tools have not been fully utilized. Although there are many reasons, the lack of CNC talents is undoubtedly one of the main reasons.

CNC major direction and employment direction.

In order to make graduates have strong job adaptability and wide employment coverage, several specialized directions are set up: CNC equipment fault diagnosis and maintenance, computer industrial control, equipment modeling design, speed control system, economical CNC system application, equipment CNC transformation design, programmable controller, etc.

The graduates of this key major are mainly oriented to enterprises, generally engaged in the work of CNC technology, and its main business scope is: engaged in the formulation of CNC machine tool processing technology regulations and CNC machining production and construction; CNC programming and design; Installation, commissioning and maintenance, repair and service of CNC machine tools.

Traditional industries are not traditional Introduction to the basics of lathes Traditional lathes cnc automation integration.

The electrical faults of CNC machine tools can be classified according to the nature, appearance, cause or consequence of the fault.

1) According to the location of the failure, it is divided into hardware failure and software failure. Hardware failure refers to the abnormal state or even damage of electronics, electrical components, printed circuit boards, wires and cables, connectors, etc., which is a fault that needs to be repaired or even replaced before it can be eliminated. Software failures generally refer to the faults generated in the PLC logic control program, which can only be eliminated by entering or modifying some data or even modifying the PLC program.

Failure of the part machining program is also a software failure. The most serious software failure is the defect or even loss of the CNC system software, which can only be solved by contacting the manufacturer or its service organization.

2) With or without indication when the fault occurs, it is divided into fault with diagnostic indication and fault without diagnostic indication. Today's CNC systems are designed with perfect self-diagnostic programs, real-time monitoring of the entire system's software and hardware performance, once a fault is found, it will immediately alarm or there is a brief text description displayed on the screen, combined with the system equipped with a diagnostic manual can not only find the cause of the fault, the location, but also the method of elimination. Machine builders will also be able to design specific machines.

A lathe is a machine tool that uses a turning tool to turn a rotating workpiece.

Traditional industries are not traditional Introduction to the basics of lathes Traditional lathes cnc automation integration.

Definition: A machine tool that uses turning tools to machine rotating surfaces on a workpiece.

Lathes are mainly used to process shafts, discs, sleeves and other workpieces with rotating surfaces, and are the most widely used type of machine tools in machinery manufacturing and repair factories.

CNC lathes can be divided into two categories: horizontal and vertical. There are two kinds of horizontal lathes: horizontal guide rail and inclined guide rail. High-grade CNC horizontal lathes generally use inclined guide rails.

According to the number of tool holders, it can be divided into single tool holder CNC lathe and double tool holder CNC lathe, the former is two coordinate control, and the latter is four coordinate control. Most of the double turret sleeper cars use inclined guide rails.

CNC lathes, like ordinary lathes, are also used to process the rotating surface of parts. Generally, it can automatically complete the processing of outer cylindrical surface, conical surface, spherical surface and thread, and can also process some complex rotating surfaces, such as hyperboloid surfaces. The workpiece installation method of lathe and ordinary lathe is basically the same, in order to improve processing efficiency, CNC lathes mostly use hydraulic, pneumatic and electric chucks.

The shape of the CNC lathe is similar to that of the ordinary lathe, that is, it is composed of the bed, the headstock, the tool holder, the feed system, the pressure system, the cooling and lubrication system, etc. The feed system of the CNC lathe is qualitatively different from the ordinary lathe, the traditional ordinary lathe has a feed box and an exchange gear frame, and the CNC lathe directly uses a servo motor to drive the slide plate and the tool holder through the ball screw to realize the feed movement, so the structure of the feed system is greatly simplified.

There are many varieties of CNC lathes with different specifications, which can be classified according to the following methods.

When the workpiece is rotating, the processing method of turning it with a turning tool and changing its original shape is called lathe. That is, lathe processing.