If you want to buy a three coordinate machine, the performance is better, Japan, Germany, and the br

Now there are many three-coordinate brands, and it is generally believed that the imported ones are good, Hexagon and Zeiss are very good, but the company is relatively strong, and those who use more coordinates can choose these two brands. There is also domestic production, and now there are many cost-effective three coordinates in China, and the domestic benefit is that the general service is very good. The brands I know in Qingdao Qingdao Sanding are good, you can consult them.

There are many companies engaged in three-dimensional, two-dimensional, and two-dimensional, in addition to domestic brands, there are also some first-class foreign brands.

1. TZTEK: It is understood that the headquarters is located in Suzhou, product quality and service awareness are leading in domestic brands, and many domestic metrology institutes use other products, which are more cost-effective than foreign products, and can compete with foreign products in terms of quality.

2. Tianqin: Relatively speaking, the customer base is dominated by small and medium-sized enterprises and private enterprises, and the market share in the low-end market is slightly higher than that of other domestic brands in the same country.

3. Yixin: The market share of manual image measuring instrument is slightly higher, and ** is lower among domestic brands. In recent years, there may be a tendency to move towards machine tools.

4. Zhitai: Headquartered in Nanjing, known as a Taiwanese brand, because of the early start, the early market share is not bad, with the strength of other domestic brands, on the whole, in recent years, Zhitai has gone downhill in product quality and market share. I heard that there was an abnormality in internal management, which led to many technical and R&D backbones jumping ship and working alone.

Need to verify) 5. Wanhao: domestic low-end products **low.

6. In addition, there are Jiateng, Zhaofeng, Taiwan Jianwei and so on.

As for foreign ** products, they are everywhere. To name a few: MAHR, Zeiss, Nikon, Steret and many more.

Personally, I think that among foreign brands, Zeiss is the best. Among the domestic brands, TZTEK is the best.

Zhitai Group, Hexagon (foreign production), Zeiss, Nikon (LK, UK), Eurotone (Outong),

What is the company? It's better to be close to the manufacturer.,Not necessarily fly to Europe and the United States.。。。 The domestic work is also good.

To tell the truth, GAC spent 100 million US dollars to take down the full set of technology of the classic Alfa Romeo 166 model from the famous Fiat Group in Italy.

GAC also invited a group of Italian engineers from Italy. Then the process of localization began. Launched the GA5 model of Trumpchi, and then developed an SUV version of the GS5 on the basis of the GA5, and then extended the wheelbase to have the GA6 and GA8 series.

However, after that, GAC Trumpchi completely abandoned Alfa Romeo's chassis technology. The subsequent GS4, GA3, GA4, and the new "New GA5" and "New GA6" have nothing to do with Alfa Romeo. Therefore, in the field of playing cars, Trumpchi's competitiveness and reputation are also decreasing.

But it is undeniable that the exterior design of Trumpchi is getting more and more beautiful.

With the progress of society, more and more people are buying cars, and some people ask the rabbit, how about the GAC Trumpchi GS5? Is it worth buying? Today, Fa Rabbit will tell you how this car is? Is it worth buying?

Trumpchi SUV power is weak, fuel consumption is high, it is recommended to consider Changan CS55, the workmanship is more solid, the fuel economy is good, the power is also good, you can go to Liuyang Pass, where the Changan Automobile 4 son understands.

Now I have driven more than 40,000 kilometers and always have problems, it is recommended not to buy GAC Trumpchi GA5, when the car is always troublesome, it will annoy you.

I think it's average, Changan Automobile is very good! Changan Automobile has developed rapidly in recent years, and its technology has also been greatly improved. There is a big improvement in the appearance of quality and safety!

Buy a car for 1 year bearing sleeve broken, but it's good to warrant, just after the warranty period shock absorption and broken, speechless, don't buy this if you can't buy this.

GAC Trumpchi's car reputation is quite good, and the cost performance is also quite high, in fact, the cost performance of domestic cars is very high, and the landlord can consider it if he plans to start.

My GS3 manual, driven 20,000 kilometers, in addition to the abnormal sound of the reading lights, the abnormal sound of the seats, the paint is relatively thin (but the steel plate of the car is very thick), other problems are not big, and it is often a bad road... The three major pieces can be, no big problem, the chassis is really good, and you can know it when you go to the construction site on a bad road

The GS4 has already sold millions of units, and when it comes to brand recognition, I believe anyone who cares a little bit about cars should have heard of the GS4.

The quality of GAC Trumpchi's car is poor, the Trumpchi 4 I bought ran to 60,000 kilometers and the gearbox was broken, and the support was broken to 70,000 large frames, and the car was also broken just out of the direction of the warranty, and the manufacturer did not care about me I felt that the quality of the Trumpchi car was not good, it was a big problem with the machine, and the quality and service were very poor.

The quality and service are very poor! My GS4 bought back on the left deviation, repaired 3 times did not repair, the third time directly said that the repair was not good and said that it was caused by myself, really no conscience! Reflect to the headquarters and ignore you, so that the manufacturer with such an attitude can come out with a good car early?

If you want to buy a car, you should pay attention to it. My car was picked up from the Jiaozhou 4S store.

I bought the GS3 automatic. Not bad. Actual fuel consumption in urban areas is 8.5

I have never had any problems with the GAC Trumpchi GM6 I bought! I think the quality of the current domestic cars is good! And the most important thing is that the configuration is high!

Cheap price! With my 20 years of experience in car repair, I tell you that no matter what kind of car it is, it mainly depends on who it is sold to! People who know how to drive can't drive any car!

All cars are three separated! Seven points of nourishment!

I opened a repair shop, and there were many problems with the engine warranty period of the joint venture car! The main thing is that they don't know what car to change oil! Some figures are cheap! Some of the money is in place, and the oil model is wrong!

People who don't know how to drive are rubbish for him!

I haven't bought a car, I'm going to buy a car, I advise you not to buy a Trumpchi car, the quality is very poor, and the fuel consumption is high, we just bought the GS5 only a few months, there are problems everywhere, I bought a new car, I didn't find it at the time, one day I accidentally turned on the switch on the back row, and I couldn't close it directly

The Trumpchi car I bought also had various problems, the air conditioner was broken, the sunroof was broken twice, and the headlights were broken twice. I've tried engine shake recently, hey.

Trumpchi's words are a GS4 or sales are very good, and the quality is not bad.

This car is okay, because he is one of GAC, and other brands are also domestically produced, well, okay, at least his technology is from GAC,

The higher-end domestic car is cost-effective, and the only drawback is. After-sales is too TM broken.

Trumpchi quality garbage, after-sales service is more garbage.

Garbage truck, I regretted dying when I bought it, and there were a lot of problems.

The technical level and production standards of domestic cars are now improving more and more, but there is still a certain gap compared with imported cars, so it is recommended that you learn more about imported cars, and you can go to the imported car market to learn more, I hope it can help you

Have you ever been to the United States?

There are a lot of Japanese cars in the United States. Toyota is selling well in the United States.

Because the Chinese are not confident in domestic production.

For domestic products, mourn their misfortune and be angry with them.

Chinese counterfeiting technology is too high, a product expires after the production number, with inferior products mixed to excellent products, a medicine to buy more than 60, when can they take you as a compatriot, Germans and Japanese are the most rigorous people in the world, Germans do not run red lights in the middle of the night. It is said that our experts went to Japan to investigate the culture of the Tang Dynasty. The quality of the Chinese people is too low.

Some pawnshops that carry out civilian business can make watch pawns.

When, no invoice does not affect.

The watches that can usually be pawned are mainly Swiss watches, such as Rolex, Patek Philippe, Vacheron Constantin, Cartier, IWC, Piaget, Audemars Piguet, Jaeger-LeCoultre, Chopard, Breguet, Franand Muller, Omega, Longines, etc., in addition, the German Lange Glashütte can also be, in short, it is more valuable. Japanese watches and domestic watches are generally not collected by pawnshops.

Watch pawn depends on whether the watch is damaged (generally not accepted if broken) and the degree of newness, style and other factors, according to the market price to a certain discount (usually less than 5% off, different brands are not the same, Rolex is relatively better value retention) to determine the pawn gold, interest on a monthly basis, the customer has money to redeem, no money expired will be dealt with, and the pawnshop will be sold.

Shanghai Yufeng Pawn (No. 201 Tianshan Road) civilian pawn business is relatively comprehensive, **platinum diamond jewelry and Tianyu jade watch pawn are done, and there are a lot of unique products for sale, you may wish to consult.

It depends on how much money the buyer pays! It can be sold second-hand to whoever wants it.

It should be possible, maybe when 3,000 yuan to 4,000 yuan.

There is no invoice** will be greatly discounted, because the pawnshop is not easy to sell, and those who don't know how to buy it dare not buy, and they will also pay for an appraisal, if they haven't repaired it, it's about 3,000!

The workmanship of the German schoolbag is more exquisite, and the quality is also good, the McNeill schoolbag I bought for the child before, I like it very much, and the volume of the schoolbag is also large, and there is a waterproof function.

Japan's good schoolbag is more than 3000, Germany also wants more than 1000, I recommend a schoolbag to you, called Struggle Fish, fully functional, can protect the child's spine, please take a look at my personal information to understand, I hope to give you the best answer