j What was the purpose of the pyramids?

The tomb of the pharaoh is eternal for the protection of the pharaoh.

Hello dear! It is curious how people built the pyramids at that time. There are several theories about how the pyramids were built:

Spiral construction, manual pouring, anti-gravity technology manufacturing. The spiral construction method is to build a spiral staircase along the four walls, and while going up the stairs, you will go up to the reed cover in the spring. Manual pouring is to put the mixed concrete into a basket and salute it, lift it on or carry the pyramid under construction, pour out the boulders, and raise the tower.

Pray for eternal life after death, so that he can live as comfortably after death as he did before his death.

The pyramids were the tombs of the kings of ancient Egypt. These rulers are known in history as "pharaohs". The ancient Egyptians' devout belief in the gods led them to develop a deep-rooted "concept of the afterlife" very early, and they even believed that "life is only a temporary stay, and death is a permanent enjoyment".

Thus, the Egyptians saw the underworld as a continuation of earthly life. Influenced by this "concept of the afterlife", the ancient Egyptians prepared for the afterlife with sincerity and confidence while they were alive. Every wealthy Egyptian was busy preparing his own tomb and decorating it with various objects in order to gain eternal life after death.

In the case of a pharaoh or nobleman, he would spend years, if not decades, building tombs, and ordering the craftsmen to continue to carry out the activities of sailing, hunting, feasting, and the work of servants with tomb paintings and wooden models, so that he could live as comfortably after death as he did before his death.

Summary. Step 1: Site selection.

First, the Egyptians would choose a solid site on the west bank of the Nile, horizontal and facing north, and they would measure the frame of the base and mark it on the beach.

How did people build the pyramids at that time?

Step 1: Site SelectionFirst, the Egyptians would choose a solid site on the west bank of the Nile, horizontal and facing north, and they would measure the outer frame of the base and mark it on the beach.

Step 2: StackingNext, they will drag the cut boulders to the construction site and then pile them up. After the first layer was built in this way, people built an earth slope with adobe, lime, clay, etc., and used the earth slope to transport the stones up to build the second layer, and in this way, the layers were piled up layer by layer, and finally a tall pyramid was formed.

Step 3: Layer of Lime Layer Finally, people will apply white lime to the outer layer of the pyramid to make the whole pyramid look smooth.

The pyramid is not simply a magnificent structure, it is a comprehensive reflection of the economic power, social structure, religious beliefs and social development level of ancient Egypt. To this day, the pyramids still contain many unsolved mysteries waiting to be discovered.

The pyramid is a very famous structure in the ancient Egyptian civilization, and it is a representation of the pharaoh's tomb. How were the pyramids built in ancient times without modern industry and equipment? The following is the construction process of the pyramids.

Site selection and planning.

First of all, choose a suitable site before building the land next to the pyramid. In general, pyramids are built on higher ground, which is more deterrent and can prevent flooding. At the same time, it is necessary to plan the size and shape of the pyramid, which requires a lot of calculations and measurements.

Quarrying and transportation.

In order to build the pyramids, a large number of stones were needed. Egypt has relatively few stone resources, so it needs to be transported from a distance. A large number of stones needed to be transported by boat, in the tributaries of the river to avoid wind and waves on the water. In addition, roads were built in order to transport the stones.

Foundation and internal structure.

After choosing a site and transporting the stones, it's time to start building the pyramid. First of all, a foundation needs to be built, which will serve as a load-bearing part of the entire pyramid. On the foundation, an internal structure was also built, including a tunnel to the pyramid below and an interior corridor, among other things.

Exterior structures and pyramid spires.

After the construction of the internal structure is completed, the construction of the outer structure of the pyramid can begin. The exterior and façade of the pyramid were built with large stones and cement. In addition, an additional pyramid spire, the so-called "apex", was built.

paints and decorations.

When the foundation, internal structure, exterior structure, and spire of the pyramid have been built, paint and decoration need to be added to the pyramid. These paints and decorations protect the pyramid from erosion and also add to the aesthetics of the building.

The use of pyramids.

Finally, the Pyramid of the Ascending Spine was ready for use after completion, and it was the tomb of the pharaohs of Egypt. After the pharaoh's death, his body was placed in the main cavity of the pyramid and a large number of tributes and treasures were buried as a sign of respect.

Maintenance and repair.

The construction of the pyramids is just the beginning, and maintenance and repairs are ongoing. Due to the passage of time, the pyramid will have various problems, such as the degradation of the stones, the breakage of the internal structure, and so on. Therefore, the pyramid needs to be maintained and repaired to ensure that it can be preserved for a long time.

The above is the construction process of the pyramids. Despite today's modern industry and equipment, the pyramids are still an architectural marvel that represents the ingenuity and endurance of the ancient people.

1. Spiral construction method. It is a spiral stepped scale built along the four walls, and the stairs are covered while going up. In this way, there is no need to use levers, crowbars, and cranes, which is also more in line with the actual situation of the ancient Egyptians in Huizhou.

2. Artificial pouring method. Some scholars have studied the small stones taken from the pyramid of Khufu for laboratory testing. Assays proved that the stones were composed of shell limestone.

It is speculated that the ancient Egyptians at that time probably adopted the method of "breaking the whole into parts" when building the pyramids, that is, mixing and destroying the erected concrete into baskets, lifting or carrying the pyramids under construction, and then pouring them and covering them, increasing the height layer by layer, which is both "labor-saving" and labor-saving.

Internal structure. The square cone-shaped imperial tombs of the ancient slave societies of Egypt have corridors, staircases, halls and various valuable ornaments in the tower. This passage has a cross-sectional area of 58 square centimeters and is located about 65 meters above the south wall of the Queen's coffin in the Great Pyramid.

At the bottom of this passage is a stone slab with two copper handles.

What exactly is hidden behind this stone slab, no one knows to this day. However, what the robot has seen after entering through the passage may give us more insight into the Great Pyramid, which is located near the Giza Plateau.

Since their discovery in 1873, there have been many speculations about their origins. One theory is that they were vents that provided air to the workers who built the interior of the pyramid.

But if this statement is true, then why before the works are not completed. Another theory is that there was a secret burial chamber behind the stone slabs in these passages.