About LAN printers and sharing questions?

In order to access C, and to be able to print using a shared printer on C, there are two issues that need to be addressed:

1. Set C and B to be able to access each other

Set up computers B and C as follows:

1. Right-click "My Computer" - > "Management" - >System Tools" - > Local Users and Groups - > Users".

2. Right-click on the "guest" user > "Properties".

3. Remove all the lower left side checkmarks.

4. Start -> Run -> Open Group Policy.

5. Select Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> User Rights Assignment.

6. Right-click the "Deny access to this computer from the network" attribute and delete "guest".

7. Right-click the "Access this computer from the network" -" attribute, select "Add user or group", and add "guest" -" to confirm.

2. After B finds C's printer, install the printer's driver on B's computer.

good luck！

The premise of printer sharing is that you are in the same LAN as other computers, and then create a shared file by yourself to see if other people's computers can be shared, and whether the host's firewall is turned on.

Look at the IP address of the host, such as then start running --- on the client computer.

See if you can find it, if you can't find it, either the client's access rights are problematic, or the host side does not form a LAN with the client! The landlord tried again and didn't understand the plus.

The next LAN sharing tool is all there is to it.

It was clear that the Working Group was not a group.

What does "not in the same LAN" mean, whether it is not in the same network segment, or physically not on the same network, such as the first type, as long as different network segments can be routed, directly through IP access and sharing, the same as the same LAN settings. If you don't connect physically, then don't think about it, and get the network through first.

In order to share a printer on a network, the computer to which the printer is connected must have the following:

1. The computer connected to the printer can be accessed by other computers in the network, 2. The computer connected to the printer has enabled printing and sharing services3. The printer has been shared.

The most important of these is the first one, as long as the computer connected to the printer can be accessed normally by other computers in the network, whether it is in a LAN or not, the difference is that when it is not in a LAN, the routable protocol is used on the two computers, and there are corresponding devices in the network to support mutual communication, the rest of the problem is simple, you only need to share the printer on the computer connected to the printer, and use a computer like "hostname to share the printer name" or "host IP address" on the computer to be connected If you want to connect to the computer and there is no related driver, the system will automatically install it when you access it for the first time (provided that the operating system is the same or the driver of the corresponding other operating system is attached to the computer that shares the printer). As for the setting of sharing permissions in the operating system, I don't think it's beyond the scope of this topic.

If there are two LANs, if you want to share them separately, you can use VPN technology.

A VPN is equivalent to combining multiple LANs into a local area network, which is commonly known as a tunnel connection.

Installing and Sharing Local PrintersA local printer is a printer that is connected to the computer used by the user. To add a printer in Windows, the steps are as follows:

1. Set up printer sharing on the machine that has installed the printer driver. Select Start Setup Printers, select the printer you want to share, right-click, and select Share. , the detailed operation is shown in the figure:

Select "Share this printer", set the name of the shared printer, and press OK to finish.

2. Client settings: After the printer server is set, the client only needs to add this shared printer to realize the realization of network sharing printing;

3. When performing the third step of "Add Printer", select "Network Printer", click "Next", and the user can set the way to find the printer here;

4. If the user wants to find a printer in the workgroup, you can click "Next" to pop up the "Find Printer" dialog box. Since it is inside the local area network, you can select the single option of "type the printer name, or click 'Next' to browse the printer";

5. Users can enter the name of the printer or click "Next" to pop up the "Browse Printer" dialog box. Here, all the shared printers in the domain and the computers connected to the printers are listed in the Shared Printers list box. If there are multiple printers in the LAN, users can find the right printer for themselves here;

6. Click the "Next" button, in the pop-up dialog box, the user can set whether to set the printer as the default printer;

Answer: Hello, first connect the printer to one of the computers, and make sure that the printer is turned on and the driver can be used normally (here the printer is HP LaserJet M1005). Go to Start - Printers & Faxes, in the Printers & Fax window, find the connected printer, right-click, and select the Share option from the drop-down menu. In the printer HP LaserJet M1005 attribute window, select the Share This Printer option, the share name will be automatically generated, click Apply and then click OK, the printer icon will appear to indicate that the setting is successful.

Run the start-run command, enter cmd to bring up the DOS interface, enter ipconfig to view the IP address of the computer connected to the printer, and of course, you can also view the IP address in other ways. Execute -Start-Run on a different computer, enter the UNC path in the run dialog box, and press Enter. Automatically open all shared folders and settings on your computer with IP address, find the shared printer, double-click the printer, and you can print the test.

How to share printers in a local area network.

All in the same network segment.

2.The name of the working group is the same.

3.The network card protocol to which the printer is connected is selected"Microsoft files are shared with printers"

4.Right-click Printer-Properties-Sharing, set sharing, win7 also select the work network, and enable related items in the advanced sharing settings.

5.Turn off the printer's computer's firewall if necessary.

Other computers can install the printer driver and select the Network Printer item (this is usually required for printers that are directly connected to the network).

Simple and practical.

1. On the printer, open the printer and fax, turn on the printer, select Printer (P) on the menu bar, select Share (H), and set it to share;

2. Find out the IP address of the computer where the printer is installed, if you don't understand the method, click Start Run (the shortcut key is Window Key + R).

Enter cmd enter.

Enter ipconfig and press enter.

4. Double-click the printer and click OK.

1. Let the computer connected to the printer set up a shared printer.

2. Find the computer connected to the printer in the online neighbor and open it.

3. Find the shared printer and right-click to select Connect. (At this time, the printer will install a driver for the connected computer, and so on).

4. Check whether the shared printer is connected to Fax & Printer.

Isn't it okay to right-click on a shared printer?