The LAN shared printer shows a print job, but it can t be canceled if it doesn t print

b. The machine cancels the printing and it's OK! Ga simple.

I guess it's a driver issue.

LAN shared printers sometimes can't print, and you can reconnect them.

The specific steps are as follows:

1. The computer runs the shortcut key Windows R to bring up the running interface.

2. After bringing up the operation interface, enter the IP address of the printer in the known LAN in the input box, and then click OK.

You can try reinstalling the tethered printer by following the steps:

1. Open the control Swift panel, select Printer & Fax, and click "Add Printer" on the left.

2. The Add Printer Wizard window pops up, and click Next directly.

3. Prompt the printer option to be installed, select the network printer and click Next.

4. The search method of the network printer pops up, here is the easiest way to find the printer in the local area network.

5. After entering the path of the network printer, click Next, and a prompt will pop up to install the printer.

Set it to the default printer.

7. Click Next to complete the installation of the network printer.

The analysis can be carried out as follows:

2. If there is a system conflict, restart the computer, or reinstall the system for testing.

3. The firewall or anti-virus software automatically blocks the driver file, close the firewall or anti-virus software, and reinstall the driver for testing.

4. If the printer spooler service is not turned on correctly, check whether the print spooler is turned on and closed.

The shared printer suddenly cannot print, and the user account restriction is solved.

On the new page that appears, find the "Computer Configuration" option on the left side of the Local Group Policyr and double-click it with the left mouse button.

The shared printer suddenly cannot print, and the user account restriction is solved.

Find "Windows Settings" in the user configuration, and then "Security Settings" in the menu on the right, note that this is a very critical step.

The shared printer suddenly cannot print, and the user account restriction is solved.

After double-clicking on "Security Settings", "Local Policies" will appear, click on Local Policies, and you will immediately find an important step to solve the problem.

The shared printer suddenly cannot print, and the user account restriction is solved.

After clicking on the local policy, another security-related content appears that is "security options", and the dawn is just around the corner.

The shared printer suddenly cannot print, and the user account restriction is solved.

Click on the security options, find the Find Account at the bottom of the menu on the right, and use an empty password to only allow the local account to log in to the console, and select "Disabled". Then connect the printer and you're good to go.

The shared printer suddenly cannot print, and the user account restriction is solved.

I think your LAN is not very stable, if your printer has a network port, you can connect a network cable, as a network play, so the effect is better, but also more stable!

If it is connected to a computer, then set this computer to a fixed IP address, which can also ensure its stability!

1.Check your internet connection for the ping IP (the machine on which the printer is installed) first

There may be a problem with the connection to your network cable, or the console is not turned on, otherwise the printer will not be found!

Fix it, or restart it, and if it doesn't work, you'll have to reinstall or reconnect.

On the host computer with a printer, right-click "My Computer" and enter "Management-Computer Management-Shared Folders-Sessions", turn off all sessions, and then try to print, and it should be done. Of course, make sure the network is connected. You will know this ping under the IP.

Workaround:1. Click "Printer" on the "Control Panel" on the "Start" icon.

2. In the control panel window, click on the "Add Printer" option.

3. In the "Add Printer" window, click the "Add Local Printer" option.

5. In the "Install Printer Driver" window, select the "Vendor" selection box. In the Printer selection box, select HP DeskJet 3500 Series, and then click the Next button.

7. In the "Type Printer Name" window, enter the printer name in the text box of "Printer Name", and then click the "Next" button.

8. After the system prompts that the printer is added successfully, click the "Finish" button. Print the message and you're ready to send.

It is recommended to reinstall the network printer, and the installation method is as follows: Printer and fax machine - Create a printer - Network printer - Select (find the shared printer and select) - Install the driver - Print the test paper to try! If the test paper can be typed, then there is no problem, if not, then it can only be solved according to the specific situation!

Let's see if there's a following:

1.Set the other person's printer to share.

2.Turn on the guests guest user of the other computer3When you add a printer, use your network connection to find the printer, then add and set it as the default attempt to restart the printer.

You cancel the print job.

Re-set sharing in settings.

The IP address of the host of the shared printer is fixed.

See if the print properties are paused or taken offline.

Is it okay to restart your computer??? See if the workstation is on.

I'm having a similar issue. Simply that's it"The guest account password expires"It won't let you connect as a guest. It's normal to reset the password of the guest account (there was no password originally, it was empty, and it was also reset to an empty password, and it was saved directly).

The host computer didn't give you sharing permissions! You set up a workgroup on the host's online neighbors, add everyone to it, and set it up to share printers within the group. Next, you open my computer on your computer, right-click, Properties, Workgroup, and change the team name to the one you just set.

If that doesn't work, check your console's printer settings to see if the guest account is turned on. This is shared in the technical support of Changchun Sihai Technology.

Reinstall the share Is the IP of the host fixed or changing?

It's easy to redo it once 1. Host shared printer 2 Other computers connected to the host IP 3. Printers connected by default on other computers. [Remember to delete the original printing program first].