What to do if your TV gets into recovery mode?

1. If the network problem causes a crash, you can generally restart the router or restart the TV and then try to connect to the network to solve it.

2. Watch online TV.

When there is a problem with the software platform that causes the crash, you can generally try to use other software to network TV programs. In addition, it is necessary to check whether the software has been installed recently and the system is incompatible and conflicted, resulting in a crash, and generally deleting it can solve the problem.

3、Problems with the TV system cause automatic crash,If the system is incompatible with the software,Or the system files are lost,Resulting in a crash when using network TV,Generally, you can enter [System Settings] and use [System Restore。

Restore the TV system to factory settings.

If the system can be upgraded, try to select [Upgrade to the latest version] to solve the problem.

4. Hardware problems: There are problems with the hardware of the TV that lead to automatic shutdown, such as short circuit in the internal circuit and failure of the switch circuit. The failure of the internal parts of the TV, the existence of short circuits, the leakage fault of the high-voltage package, etc., may cause the TV to crash, it is recommended to contact the after-sales service of the TV to conduct a comprehensive inspection of the TV.

If the TV has recovery mode,It's normal in this case,It's also to protect some of the images in his TV,So just restart it directly。

If the TV appears in recovery mode,You don't need to click on recovery mode,You just need to click back or exit this mode,If you click on recovery mode,It will be restored to factory settings,So be sure not to choose this,Be sure to exit or return。

Hello,The TV appears in recovery mode,You just click on its prompt,After the system restores it,It's ready to use normally。

Unplug the power cord and press and hold the TV on/off key with your hand. Then plug it in, press and hold the on/off key for 10 seconds, and finally release it and you'll be taken to a settings page. There are a total of 3 options on that page.,Choose the first one.,It seems to be called what to clear SD.,Click in and press OK to clear.。

Then press the third option and restart the TV. Finally, wait 10 minutes and it's OK!

The TV appears in recovery mode,You can directly repair the remote control and exit it directly,You can do it without recovery mode。

If the TV is restored to factory settings,It means that the settings inside have been restored to factory settings,At this time, you can reinstall the software inside,Then reset the settings inside。

If this happens to the TV, see if you can skip it, or if there is a problem with the system, then choose to factory reset the TV back to normal.

Hello, there is no way to do this situation, if you recover it, you can't get it back.

If the TV appears in recovery mode,It should be pressed somewhere,You can,Click restart inside the monitor。

If your TV has a recovery mode, it is recommended that you turn off the recovery mode.

First, unplug the power cord, press and hold the TV on/off key with your hand, and then plug the TV in. Press and hold the on/off key for ten seconds and you'll enter a setup mode. There are three options on that page, select the first one to clear SD, click on it and click OK.

Then tap the three options to restart the TV, wait for ten minutes, if it hasn't solved it, you have to find it. The TV after-sales service personnel carry out inspections and repairs.

First turn on the TV, turn on the TV and enter the home page.

Then on the home page of the screen, select the "Settings" item.

In the pop-up window, select System, and then select System Upgrade.

On the system upgrade page, select "Factory Reset".

After selecting the factory reset, a prompt box will pop up, select Confirm, and wait for the automatic recovery to complete and restart the TV, as shown in the figure below.

If you do a factory reset, the TV will have no TV signal and will need to be reset with the TV remote. If it is an IPTV, you must first log in to the settings option, and then find the input interface of the set-top box in the signal source after logging in. When the set-top box is connected, the TV will display the screen on the set-top box home page, and then switch to the set-top box remote control to operate it.

What to do if the TV presses a factory reset.

If you do a factory reset, the TV will have no TV signal and will need to be reset with the TV remote. If it is an IPTV, you must first log in to the settings option, and then find the input interface of the set-top box in the signal source after logging in. When the set-top box is connected, the TV will display the screen on the set-top box home page, and then switch to the set-top box remote control to operate it.

It's what I want to change to the smart one.

Now that's how it is.

HDMI1 then didn't pull the cord, right?

No, then I'll check it out for you, you wait.

Is the set-top box open?

Then show me the line of the set-top box.

Is it black flat, or red, yellow, and white.

If you have three lines, choose HDM

If it's a black flat cable, choose HDM

Sorry for the opposite.

Again, the three lines are ATVs. For black flat cables, choose HDM.

Summary. What should I do if my TV is factory reset? Hello dear, glad to answer for you.

You can restore the TV program's channels by re-searching the station. The method is as follows:1. Turn on the TV, point the TV remote control at the TV, and press the [Menu] button to bring up the [Menu Options] of the TV.

2. Find [Channel Search] in [Menu Options] and press [Confirm Button] to enter the [Channel Search] interface; 3. After entering the [Channel Search] interface, you will see the two options of [Manual Search] and [Automatic Search], select [Automatic Search], and press the [Confirm] button to start searching for TV channels; 4. After the TV [Automatic Search] program channel is completed, it will return to the TV program** interface, indicating that the search has been successful; Next, the user can start the TV show. Hope it helps

What should I do if my TV is factory reset? Hello dear, glad to answer for you. <> can restore the TV channel's TV channel by retaking the new auto-search channel.

The method is as follows:1. Turn on the TV, point the TV remote control at the TV, and press the [Menu] button to bring up the [Menu Options] of the TV. 2. Find [Channel Search] in [Menu Options] and press [Confirm Button] to enter the [Channel Search] interface; 3. After entering the [Channel Search] interface, you will see the two options of [Manual Search] and [Automatic Search], select [Automatic Search], and press the [Confirm] button to start searching for TV channels; 4. After the TV [Automatic Search] program channel is completed, it will return to the TV program** interface, indicating that the search has been successful; Next, the user can start the TV show.

Hope it helps

Hello dear, glad to answer for you. <>

Bring up the signal quality on the menu on the Signal Strength & Signal Posture Quality page, and the automatic search function will be available, and everything will be back to the same after re-searching. Go to the program management in the main menu and search for the program again. Search for excerpt letters:

Main Menu - Program Management - Program Search - Automatic Search - OK Restart the set-top box, it will generally automatically search for programs, or enter the main menu, enter the "System Traces" and the like, find "Channel Search" or "Program Search", and then select "Automatic Search". Hope it helps

After the smart TV is restored to factory settings, there is no problem as long as the system boots up normally:

1、Restore factory settings means that all the data of the TV have returned to the initial state,Software and all aspects of the system settings(Individual devices due to the imperfection of their own system,The system may not be able to restart,It needs to be solved by flashing);

2. First of all, the connected network should be disconnected and need to be reconnected;

3. In addition to the pre-installed application software of the system, the installed third-party software needs to be reinstalled;

After the smart TV is restored to factory settings,Turn it on and follow the prompts,Just like when you just bought it,Just operate it the same。