Almighty bar friends, how can there be wooden partitions

Now it is generally used light steel keel, ** on the basic same, convenient and safe, I don't know what special requirements you have, you are**?

The method of fixing the wooden partition is as follows:

1.First familiarize yourself with the requirements of the drawing, positioning and marking, horizontal and vertical.

2.The depth of the top and bottom wooden mortise is 50mm, such as the top floor and bathroom, it is strictly forbidden to play wooden mortise on the top surface, and the wall hole is used as a fixed point; The distance between mortise and tenon is not more than 600mm.

3.Large-area construction keel must adopt tongue and groove structure, door, window structure connection and load-bearing parts using two keel and diagonal brace keel, if there is a shape must be added to strengthen the keel to meet the requirements of fixed weights. Before fixing the keel, apply fireproof paint twice to completely cover the keel.

The keel against the wall needs to be treated with anti-corrosion.

4.The vertical keel of the wooden partition door frame should be reinforced with iron parts to avoid the loosening of the door frame caused by the opening and closing vibration of the door.

5.Wooden partitions are connected to the suspended ceiling.

a.For wooden partitions without doors, such as contact with light steel keels or aluminum alloy ceilings, only small and straight joints are required. If in contact with the wooden keel ceiling, the ceiling keel and the partition can be fixed together along the top keel, and the oblique angle iron support rod can be added to connect with the top floor of the building.

b.For wooden partitions with doors, the vertical keel of the partition should pass through the ceiling surface and be fixed with the top floor of the building or connect with the top floor of the building using an oblique angle iron support rod.

6.The gypsum board is fixed with self-tapping screws, the spacing between the peripheral screws should not be greater than 200mm, the spacing between the screws in the middle part should not be greater than 300mm, and the distance between the screws and the edge of the board should be 10-15mm.

7.The gypsum board at the end of the partition and the surrounding wall or column should leave a notch of 3-5mm, and the caulking paste should be filled at the notch first, and then the board should be laid, and the caulking paste should be squeezed to make it in close contact with the adjacent surface.

8.If the lower end of the partition is covered with a wooden baseboard, the cover panel should be 20-30mm from the ground, and when the stone skirting board is used, the cover panel should be flush with the upper mouth of the baseboard, and the seams should be tight.

Precautions. The surface of the partition shall comply with the design regulations:

Qualified: The surface is smooth, smooth, no cracking, no nail cap, no hammer marks, straight lines, edges and angles, square, tight seams, no pollution, and consistent color.

Excellent: the surface is smooth, smooth, no cracking, no nail cap, no hammer marks, lines, edges, angles are straight, square, the seams are tight, no pollution, the material specifications are consistent, the wood grain is smooth, the color is consistent, and the surface is clear and beautiful.

It mainly depends on what kind of material you install on the ground, and you can generally use a small piece of square wood on the ground to glue a small piece of square wood as a support point for the partition. In the use of sandwich panels to make the skeleton, veneer finish. There are many practices, the general carpenter knows how to do it, this partition has a disadvantage due to the design of the thermal expansion and contraction of the wood will lead to some cracks on the ground or wall, in these two places can be covered up with translucent neutral glass glue.

This kind of good is that you fix the wood first and then stick the tile around it, right?

About the living room. partitions.

Design, which we also know, is a very common kind of decoration.

way, and we also know that there are many kinds of material types and styles of partitions, so if we choose partitions, this can improve the beauty of the room, and we also know that if we choose a partition, we should also choose a material that is more suitable for use in our own homes, for example, wood partitions are also one of the types of partitions. What are its brands? Let's introduce it to you.

Introduction to wooden partitions

Hollow wood partition is partition with modern.

The product of the integration of chemical design is generally displayed in a prominent position in the interior, which plays the role of separation, beautification and coordination. It is designed with furnishings.

Complement each other, complement each other, and become an inseparable whole of home decoration, thus presenting a harmonious and tranquil beauty.

Compared with ordinary partitions, the design of wood partitions makes it have the effect of light transmission and ventilation, which will not make the indoor space boring and depressed, and can maintain the room.

Plenty of light throughout. When a wooden partition is used as a partition, it can not only give a psychological hint of spatial separation, but also ensure the living room.

the privacy when the host sits on the sofa.

When resting on it, it will not be gated.

Outside the stranger peeping.

Wood partition brand recommendation

1. Xingyilai wood partition: Foshan Xingyilai building materials.

It is a manufacturer of movable partitions integrating design, development, manufacturing, installation and sales. Xingyi has won the recognition and trust of our customers with novel design, exquisite workmanship, excellent quality and intimate service, and has taken the lead in passing the 1SO9001 quality certification in the wood partition industry, walking in the forefront of partition technology. At present, Xingyi's movable partition products have a number of independent intellectual property rights, which are suitable for indoor space partitions from 2 meters to 16 meters.

2. Diners Club Wood Partition: Guangzhou Diners Wood Partition Industry is a comprehensive enterprise integrating R&D, design and sales of partitions, wood partitions and other products. Diners Club absorbs the advanced movable partition and office module partition technology from Europe, combines the needs of Chinese users, and improves a number of independent intellectual property rights, which is the largest production base in the same industry in China.

What we have introduced to you above is about whether the wood partition is good or not, and what are the related questions about the brand of the wood partition? We should have some understanding of this aspect of the problem, we know that wood partition is also a more common type of partition in life, many families will choose this partition method, of course, we know that wood partition it also has its characteristics and advantages and disadvantages, so it is very suitable for use as a partition in the home, of course, we can also choose this way of wood partition.