The open air balcony is paved with 80 80 tiles, and how to pave it without waterproof paint without

Updated on home 2024-05-10
5 answers
  1. Anonymous users2024-02-10

    This problem is actually not as serious as the first floor, and it leaks in a few years. Look at other people's old houses, the floor slabs are concreted with steel bars.

    Soil, do not stick tiles and waterproof paint, etc., used for more than 10 years, and there has been no leakage for decades.

    It may be better than the tiled one, the floor slab is not so good-looking, and the aging speed is faster, if it is not put on a few tons, a few tons of heavy objects are pressed up.

    is not dangerous. It's no problem to cope with ordinary daily life.

    Common problems that cause water leakage in decoration, if you exclude the developer, the problem of building quality, if there are many people leaking water in the building, and the sewage pipes in the house have not been changed, it is likely to be a problem of building quality.

    Changing the direction of the sewer pipes in the house without permission is the most likely to cause water leakage, such as changing the location of the original toilet.

    The balcony originally did not have a toilet, and it was easy to cause water leakage when you went in, so it was best not to change it privately.

    If you accidentally change it, it is best to take some waterproof measures before the water leak occurs. In the location of the changed sewer pipes, home two.

    A toilet or more, stop using it for a week, do not use water, let the ground dry thoroughly, and then do waterproofing, the effect will be very good.

    In autumn and winter, it is ideal to do waterproofing, the air is relatively dry, not easy to cause moisture, and the air circulation is also fast.

    Finally, if you haven't changed the sewage pipes at home, you can consider not doing waterproofing measures, of course, if the budget is more sufficient, it will not affect you to do waterproofing. Bathroom, kitchen, location is the key to consider the location, like the living room can not be considered, if the family goes out for a long time, pay attention to about a month to go back, check some of the water outlets like the balcony, whether there is a blockage, can be very effective to prevent water accumulation.

    As an aside, there is a lot of rain in the rainy season, and I tried it once at home, and I went to the water outlet to cover the fallen leaves, and then the drainage was not smooth, no one was at home, and it almost became a water curtain hole.

    If you are too confused, you can consider cutting off the grid that is too confused, or dismantling it entirely, which is very effective in preventing water accumulation, which is one of the big enemies that cause water leakage when water accumulates.

  2. Anonymous users2024-02-09

    The balcony area is not large, in fact, it doesn't cost much money or time to do waterproofing. Wait until in case of water leakage, it is troublesome, and then re-do the waterproofing and smash the floor tiles, which side is suitable for the landlord to measure.

  3. Anonymous users2024-02-08

    If this is not waterproof, it is lucky if it does not leak, and it will only be waterproof for one or two years, but what should I do if it leaks after two or three years? Waterproofing is mainly to ensure the interests of the residents downstairs, but also in order to reduce disputes and greater economic losses in the future.

  4. Anonymous users2024-02-07

    Remove the tiles. Clean up the terrace to ensure that there is no dust and oil on the outer layer, take grout near the water pipe and the floor drain to fill the tile floor, especially where the wall and the ground are connected, and then sprinkle the anti-seepage patch, and apply it evenly to all parts of the terrace, and finally wait for an hour to clean up the excess leakage agent, and the waterproofing will be done. Then the tiles are paved and soaked.

    This answer applies to other related questions.

  5. Anonymous users2024-02-06

    Summary. You can use the sewing agent to waterproof, most of the sewing agent will solidify into a film after construction, as long as it is not destroyed, its waterproof effect is still good, choose the outdoor special sewing agent, the strength and waterproof effect will be better. The joints should be cleaned before construction, if there is dust or particles, it will affect the construction effect.

    You can use waterproof glue to fill the joints, and the leakage of the tile gaps is mostly because the internal cement mortar is loose, or there are bubbles that will cause water leakage due to the hemp surface, holes, etc., and only need to solve these problems to be waterproof. Therefore, it can be used for waterproof glue for joint filling, which is liquid type, which can penetrate into the hole, fill it, and solidify it to achieve the waterproof effect.

    The roof terrace tile surface is waterproof.

    Hello dear. You can use the sewing agent to waterproof, most of the sewing agent will solidify into a film after construction, as long as it is not destroyed, its waterproof effect is still good, choose the outdoor special sewing agent, the strength and waterproof effect will be better. The joints should be cleaned before construction, if there is dust or particles, it will affect the construction effect.

    You can use waterproof glue to fill the joints, and the leakage of the tile gaps is mostly because the internal cement mortar is loose, or there are bubbles that will cause water leakage due to the hemp surface, holes, etc., and only need to solve these problems to be waterproof. Therefore, it can be used for waterproof glue for joint filling, which is liquid type, which can penetrate into the hole, fill it, and solidify it to achieve the waterproof effect.

    Extended Materials. PrecautionsBecause the terrace is exposed to the outdoors, if it is not completed in time, the construction period will be delayed for a long time, and there is a possibility of bad weather. Especially in case of cloudy or rainy days, the waterproofing of the construction will have a great impact.

    Therefore, after the construction of waterproofing, the ground tiles should be paved as soon as possible to avoid problems such as cracking and damage caused by waterproof exposure. Of course, the construction period should not be too short, because the waterproof material has a drying time, and if the tile is not completely dry, it will affect the waterproof effect. In addition, the cement mortar used for tiling also contains moisture, and if it is directly paved, the waterproof material is more difficult to dry.

    Year of the Tiger] [Year of the Tiger] [Year of the Tiger] [Year of the Tiger].

    Skiing] [skiing] [skiing] [skiing] [skiing].

Related questions
6 answers2024-05-10

a. Rust removal method: Rust can be washed with 2 oxalic acid solution, and then wiped with water. After grinding 3-4 vitamin C tablets into powder, sprinkle them on the surface of the floor tiles, and then scrub them with water several times to remove rust stains. >>>More

5 answers2024-05-10

Tile adhesive, also known as tile adhesive or binder, viscose, etc. The construction wall should be moist (wet outside and dry inside), and maintain a certain degree of flatness, and the uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleared of floating ash, oil stains, and wax, so as not to affect the adhesion; After pasting the tiles, you can move the correction within 5 to 15 minutes. The water-cement ratio is about 1:4, and the binder after stirring should be used up within 5 to 6 hours (when the temperature is about 20 degrees); Apply the mixed adhesive to the back of the adhesive and press firmly until it is flat. >>>More

12 answers2024-05-10

Mix the glue evenly, and do not have corn starch dough.

Method: 1. Mixing of vitrified brick adhesive. >>>More

15 answers2024-05-10

First, the beauty sewing agent is good.

When we choose to hook tile joints, it is best to choose the beauty joint, because the beauty of the joint has a special filler effect, and it is an upgraded product, with a waterproof and moisture-proof role after we put the tile high, there are some bacteria that are difficult to multiply, and it is relatively easy to clean each brandIt is best for us to choose an appropriate big brand to make the grout of our tiles, and do not choose some inferior products to make some of our tile grout supplies. >>>More

7 answers2024-05-10

White tiles can be paired with pearl black.

Beauty sewing agent. This gives it a three-dimensional effect, and the black color is dirt-resistant. If you like the overall color, you can choose the same color or similar color, such as transparent beauty sewing agent, pure white beauty sewing agent, silver white and versatile ivory gold, which are more suitable for white series tiles. >>>More