I bought a new wireless router, how do I know his stability? Quality?

How to test for stability.

Connect to the computer to watch movies or long-form TV series for a long time [about 10 hours] If you don't drop the connection, you should be able to do it for a longer time.

I have a wired router, the computer has been turned on continuously for a week, and the game has not been dropped, and the wireless has not been tried.

This can try to connect 2 or more, and it's no problem if you don't drop the line 4m, if the network speed is good, connect 3 to watch movies at the same time, the network speed should be OK, connect too much, and watching movies at the same time does not rule out that there may be a feeling of slowness.

How to test about this quality.

There are also a lot of ways to say something I personally think [less heat ***] [wide coverage of the quality is good] [strong anti-interference is ***] [if it can also be lightning protection, it is close to perfect].

Less heat ***] Now in winter, the router basically doesn't feel much heat, in summer, it depends on whether the heat is large, if it is large, the life may be reduced If the wireless router is used for about 8 hours a day and then turned off and not used, you can not consider the problem of heat dissipation.

If you want to improve the life of the router, you can do some heat dissipation work properly There are many ways to add a small fan, a small fan can be bought or disassemble from the computer The 12V can be the router power supply 9V If you use a 6V fan [unless you add a resistor or something], it may be a little dangerous.

The quality of the wide coverage is good] This is linked to the ** Seventy or eighty yuan wireless router to meet the needs of about 3 to 4 layers of home use is not a problem The farther away may require a more professional router Modify the router's antenna can change the coverage of the router However, there is no such thing as hands-on ability, it is not recommended to do DIY should also be considered to be able to bear the cost of DIY failure.

The strong anti-interference is ***] This home is generally blocked by a brick wall This brick wall will indeed block the signal of a part of the wireless router I use myself About a wireless router on the other floor I searched for a signal strength attenuation of about 20% with my mobile phone.

Search it yourself to see the signal strength, or ping the address of the router to see the speed, is it stable Now the stability of the TP for the book home is good, or use the mobile phone to search for the signal, search through the wall and stay away. You can also attack routing with software. However, it is enough to measure the signal at home.

I feel that tp-link is pretty good now, I really recommend it, it's not advertised, the stability performance is good, the signal, the heat dissipation, including the quality of the router are good.

Wireless router setup signal stabilization method: To avoid interference and overlap of infinite signals, these three channels should be used in turn.

Details:1Although there can be 13 channels in a wireless network in a network standard, there are only three non-overlapping channels, that is, channels that do not interfere with each other.

Channel 3 interferes with channel 1 6, channel 9 interferes with channel 6 13, etc., so to ensure the stable operation of multiple wireless networks in the same coverage area, it is recommended to use (or 13) these three channels. If there are three wireless networks in the office, they should use each of these three channels in order to avoid interference and overlap.

2.For wireless routers used at home, it is recommended to set the channel to 1 or 11 to avoid signal overlap with other routers to the greatest extent. This is because most people don't change this setting and keep the default 6 channels.

3.Of course, there are only three non-overlapping channels provided in the network standard, and the number of non-overlapping channels that can be used is a bit small, but it is enough for the average home or SOHO wireless network. If more than three wireless networks are required in the office area, it is recommended to use a wireless device that supports standards, which provides more non-overlapping channels.

Look at the brand, tplink's is still relatively stable (within the specified range of use), and the signal of our studio's wireless router has been relatively stable, and there have been no problems.

It's related to distance and router quality, but it's okay for general home use, and I use a wireless router.

Method: 1. Brand.

The top router manufacturers include TP-link, Huawei, D-link, etc., and the basic top routers are good.

Two**. If you buy it, then it's basically a good measure. **Slightly higher.

3. The number of supported connections.

It is the maximum number of devices that the router can support at the same time. The more devices supported, the better the performance.

4. Stability.

Can your router be guaranteed to run for a long time without dropping calls, and if it drops frequently, then the router may have a problem with the hardware or a problem with the software design.

Fifth, the speed.

Note: M of the router is the abbreviation of Mbps, and the bit rate is a unit used to describe the speed of data transmission. Theoretically, a network speed of 150Mbps is a transfer speed per second.

With a speed of 300Mbps, the transfer speed per second is just that. The flow rate of the data is variable, and the bit rate is only an average reference value. The network speed of 1m is theoretically 128kb s, but in fact it is only about 120, because there will be a certain loss of data in the transmission process.

The signal should be good, this is the most important indicator;

The wireless transmission rate should be large, and the mainstream is generally 300M wireless transmission rate;

The branch does not support dual-band, and the mainstream in the future is dual-band wireless routers;

Wireless standards, the latest is the standard, and this will also become the mainstream;

After the computer is connected to the router, start --- run--- enter cmd --- enter ping 0 -t Here is the IP of the router to see if it is a stable ping value,