How does one network interface provide multiple Internet access, qing is as the topic Thank you

This answer belongs to the "harmony" individual, it is shameful to copy multiple users as above, buy a multi-port (several ports can be on several computers) router (about dozens of yuan), set your router according to the following data, you can share the Internet: If you use a router to build a local area network, realize network sharing equipment; In general: Here's how to connect and set up:

This answer belongs to the "harmony" individual, copy shameful 1: connect the network cable (RJ-45) of your broadband cat to the WAN of the router, and connect the network cable (RJ-45) of the rest of the computers to the LAN port of the router; This answer belongs to the "harmony" individual, copy shameful 2: The IP address of the computer network card is set to be obtained automatically, and there is also input in the address bar of the computer browser, specifically according to the network parameters obtained by your computer network card, through the IP address of the gateway to log in to the router, most of the usernames and passwords are admin, select WAN port settings.

This answer belongs to the "Harmony" individual, copy shameful 3: Set your broadband account and password to the PPPoE mode (if it is a fixed IP, choose the static IP mode). 4：

After saving, restart your computer and you're good to go. This answer belongs to the "harmony" individual, shame on copying Thank you for my answer!

Under normal circumstances, you can connect the computer directly to the switch, and you can access the Internet independently, but it is best to ask your network management for details. The router will not divide the network speed, only the hub is divided into network speed, the route will only occupy the bandwidth when someone **, you can set the router policy to allocate the maximum bandwidth.

Remember.

Let two ports use one at the same time to surf the Internet as follows:

1. Connect the broadband network cable directly to the switch (No. 5 WAN port).

Pick two of them and connect them to the computer with a network cable.

3. How to set the host IP for dial-up Internet access first: see the local connection in the network connection, click on the right health properties, click the checkmark in front of the icon displayed in the notification area after the connection, click the Internet Protocol (ICP IP) attribute, and click to use the following IP address: IP address to fill in:

Subnet Mask:, Default Gateway:, Preferred DNS Server:

Point OK. Then establish an ADSL connection on this machine, and then click on the ADSL connection to select the attribute Advanced: will allow other network users to connect through the Internet connection of this computer.

4. Another machine also uses the right health point local connection attribute in the network connection, except for the first IP address to fill in: the last number is filled in except 1 2 255 which number is OK), and the rest is the same as the first machine to fill in.

5. In this way, the first to establish a connection enters the account password to connect to the Internet, and after dialing up, the other machines will naturally connect.