After the computer is restored with one click, the broadband display 769 cannot be connected, and ev

Error 769: Unable to connect to the specified target.

Problem: This is when there is a problem with your computer's network equipment.

Solution: Open "My Computer" "Control Panel" "Network Connection" to check whether the local connection is there.

Disabled", if yes, just double-click on the local connection and see the status change to "Enabled". If you don't even have a local connection, then your network card is 100% wrong - either it doesn't work well or it is broken. Please contact your computer company, or solve it yourself.

Error 769 error, most of them are disabled on the network card, just enable it! The causes are generally caused by the user's misoperation or some firewall software and computer viruses, which are very common.

If the local connection is not found, the driver of the network card is usually lost or the computer does not detect the network card, you can reinstall it.

I'm in this situation too, and I'm helpless right now. Assemble the machine,I want to install win7,I didn't install it.,I can't restore it.,I have to reinstall the system.。 I used the 2009 dark blue version, and after installing it, I found that there was no local connection, and the broadband connection showed an error of 769

I checked the Internet to know, most of the answers were not asked, and it was clear that there was no local connection, and that I clicked on the local connection, and I was dizzy. It's so helpless.

The following types of 769 errors are common.

1.The NIC is disabled.

Method: (Open the online neighbor to see if the local connection is grayed out, if yes, double-click to enable) 2The NIC driver is not installed.

Method: Check whether there is a yellow question mark in the device manager, and install the NIC driver 3The network card is broken.

4.The network card is disabled in the motherboard boss.

In your above situation, it is because of the reinstallation of the system, then the network card driver should not be installed!

Check whether your network card driver is installed correctly, if it is a LAN shared Internet access, you don't need a broadband connection, directly install the driver, and configure the IP address in the local connection.

If it's a broadband dial-up, you need to create a new connection, and the steps to establish a connection can be searched on the Internet.

1.Click Start, click Run, type , and then click OK.

2.Right-click the Local Connections icon. Click Enable, if the option is available.

Look at whether the network card driver and modem driver are installed, the reinstalled machine, these two drivers are generally installed and can go online, and then the next driver wizard will be easy to do.

Create a connection yourself in your neighborhood.

If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged

1. Disable and re-enable local connections;

2. Reinstall the NIC driver;

3. If the network card is not integrated, clean up the network card and replace a slot;

Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.

Uninstall the network card, and then turn on the machine to automatically detect the network card and re-enter the username and password.

Driver Wizard Auto-detect installation can fix your problem.

Delete the original broadband connection and create a new one.

It's not a problem with the system. Check the network to see if the username and password are correct. There is no problem with the cat and so on.

If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged

1. Disable and re-enable local connections;

2. Reinstall the NIC driver;

3. If the network card is not integrated, clean up the network card and replace a slot;

Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.

If error **769 occurs, usually the NIC driver is disabled, it is recommended that you troubleshoot from the following aspects:

1. Check whether there is a "local connection" computer symbol in the lower right corner of the computer monitor, and whether the local connection is disabled.

2. Check whether the computer network card is disabled;

3. Check whether the NIC or NIC driver is normal.

You just need to reinstall the NIC driver.

You don't even make it clear what you're online!

If "Error 769" is displayed for broadband Internet access, it is usually caused by the network card being disabled or the network card driver is damaged

1. Disable and re-enable local connections;

2. Reinstall the NIC driver;

3. If the network card is not integrated, clean up the network card and replace a slot;

Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.

See if you don't have the IP configured

Broadband Internet access shows "Failure Error 769", which is usually caused by the network card being disabled or the network card driver being damaged

1. Disable and re-enable local connections;

2. Reinstall the NIC driver; Sikong trembled.

3. If the network card is not integrated, clean up the network card and replace a slot;

Fourth, if it is 769 caused by the failure of the firewall program, it is generally solved by restarting the computer.