How to connect the cable between the no cat and the wireless router of Tietong Network? How do I

How to install modem with wireless router:

Connect the network cable from the LAN port of the optical modem to the WAN port of the wireless router.

Installation of a wireless router method:

1. Set the local connection of the computer to automatically obtain the IP address and DNS;

2. Log in to the wireless router, change the LAN port address of the router to avoid conflicts with the LAN port address of the cat, and connect the network cable jumper from any LAN port of the cat to the WAN port of the router;

3. Open the browser, enter the login address of the wireless router, press Enter, enter the username and password of the wireless router (the login address, username and password of the wireless router will be labeled behind the router), OK;

4. Click on the left panel menu, set up the wizard, next, select ADSL virtual dial-up Internet mode, next;

5. Set the wireless network name in the SSID box, select WPA-PSK WPA2-PSK encryption mode, enter the wireless network password (if it is a wireless router, it needs to be set), and the next step;

6. Save and restart the wireless router to complete the installation and debugging of the wireless router.

Broadband access without modem, how to configure a wireless router:

1.Connect the wireless router to the higher-level network device.

Connect the home network cable to the WAN port of the router, and when the WAN port light flashes on the router, the connection is successful.

2.Connect your computer wirelessly to your router.

The computer searches for the router's wifi name (the default wifi name is located on the nameplate on the back of the router) and connects to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the wireless gateway configuration page.

Open a browser, enter the IP address of the router gateway (usually, the default value is located on the nameplate on the back of the router) to enter the gateway configuration page. (This interface will pop up automatically for new routes).

4.Set up a wireless router to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband account password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

5.Set the wifi name and wifi password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key.

6.After the setting is completed, the router will automatically restart, please enter the new wifi password to connect, and you can access the network.

It depends on your access method, some of the cell broadband is dynamic IP, there are also individual static IP, the most is PPPoE, I wrote it right, you are not wrong, the physical connection type and access mode are not necessarily related, so first see if you need to establish a dial-up program when you connect to broadband on a stand-alone machine, if so, it should be PPPoE, if not, you should set up the corresponding route according to the instructions given to you by the access provider.

Tietong, like telecommunications, all go to the line, so there must be a cat, and the cat is generally Tietong rents your handle, call ** to ask.

How can you dial without a cat. Swordsman.

The router is also dialed up through the cat.

You can't get on ...... without a catBuy one, which is 45-60

Tietong optical modem connection wireless router method:

Steps. First, the connection method.

Routing modem --- router WAN port; The LAN port of the router --- a computer.

Steps. Second, the setting method.

Before setting, please disconnect the WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP range of the router.

In order to avoid conflicts, you can change the IP of the router to other IP segments in order to avoid conflicts (routing the LAN port of the cat). For example, it is modified to:

After restarting the router, the address to enter the router is.

2. Set up the router Internet access method.

View the IP details of the computers connected to the routing modem. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the router, and select [Static IP] in the [Setup Wizard]. Enter the same as the IP address of the routing modem, the others: mask, gateway, and DNS settings.

Restart the router after the setup is complete.

1. Confirm whether the network cable can be connected directly to the network port of the computer?

2. If you can, confirm that the router is set up correctly?

The settings of the router are as follows:

1) One end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the computer.

2) Open the browser and enter the router account number and password written on the router box or manual.

Point Setup Wizard.

Broadband connection type: PPPoE

Enter your broadband account number and password.

3) After setting, connect the network cable to the WAN port of the wireless router.

Note: If you want to change the wireless device name SSID and WiFi password, you can select the wireless settings menu item Pinmath Reputation.

4) If it is a wired router, one end of the network cable is connected to the LAN port of the router, and the other end is connected to the computer network port.

There is an IP address written under the router Generally, or you enter this into the ** column Mercury's router will also have to enter the initial password, admin account and password are this, and then enter the router settings interface The first time there will be a setup wizard Follow the method on the wizard.

Router settings have nothing to do with the access method!

Now it's all the next step to finish.